1,099 research outputs found

    Guide to on-site wastewater management for industrial and commercial establishments and other institutions: guide for vehicle service station owners and managers

    Get PDF
    Wastewater treatment, Environmental management, Organizations, Environmental Economics and Policy, Industrial Organization,

    Temperature And Pressure Effects On Elastic Properties Of Relaxor Ferroelectrics And Thermoelectrics: A Resonant Ultrasound Spectroscopy Study

    Get PDF
    Relaxor ferroelectric lead magnesium niobate-lead titanate (PMN-PT) material exhibits exceptional electromechanical properties. The material undergoes a series of structural phase transitions with changes in temperature and the chemical composition. The work covered in this dissertation seek to gain insight into the phase diagram of PMN-PT using temperature and pressure dependence of the elastic properties. Single crystal PMN-PT with a composition near morphotropic phase boundary (MPB) was investigated using a resonant ultrasound spectroscopy (RUS) methodologies in the temperature range of 293 K - 800 K and the pressure range from near vacuum to 3.4 MPa. At atmospheric pressure, significantly high acoustic attenuation of PMN-PT is observed at temperatures below 400 K. A strong stiffening is observed in the temperature range of 400 K - 673 K, folloby a gradual softening at higher temperatures. With varying pressure, an increased pressure sensitivity of the elastic properties of PMN-PT is observed at the temperatures in the stiffening phase. Elastic behavior at elevated temperatures and pressures were studied for correlations with the ferroelectric domains at temperatures below the Curie temperature (TC), the locally polarized nano-regions, and an existence of pseudo-cubic crystalline at higher temperatures between (TC and TB). Thermoelectric lanthanum tellurides and skutterudites are being investigated by NASA\u27s Jet Propulsion Laboratory for advanced thermoelectric generates (TEGs). Effects of nickel (Ni) doping on elastic properties of lanthanum tellurides at elevated temperatures were investigated in the temperature range of 293 K - 800 K. A linear stiffening was observed with increasing the Ni content in the material. Elastic properties of p-type and n-type bismuth-based skutterudites were investigated in the temperature range of 293 K - 723 K. Elastic properties of rare-earth doped strontium titanate were also investigated in the temperature range of 293 K - 750 K

    Goat manure as a soil ameliorant and yield 'stimulant' in coconut

    Get PDF

    Flicker propagation in radial and interconnected power systems

    Get PDF
    Voltage fluctuations which cause lamp flicker tend to propagate from the point of origin to various parts of a power system exhibiting some level of attenuation depending on factors such as system impedances, composition of loads and frequency components of the fluctuating waveform. Maintaining the flicker levels at various busbars below the planning limits specified by the standards is crucial, and in this regard it is important to develop an insight into the manner in which the flicker propagates via systems operating at different voltage levels. This thesis presents flicker transfer analysis methodologies applicable for radial and interconnected power systems particularly considering the influence of induction motor loads on flicker attenuation. In the first phase of the work, development of the foundations towards flicker transfer analysis methodologies is carried out by investigating the stand-alone behaviour of induction motors that are subjected to regular supply voltage fluctuations. The electrical and mechanical response of induction motors to two types of sinusoidal fluctuations in the supply voltage where (a) a positive or negative sequence sinusoidal frequency component is superimposed on the mains voltage and (b) mains voltage amplitude is sinusoidally modulated are examined. State space representation of induction motors is used to develop a linearised induction motor model describing the response of the stator current and the rotor speed to small voltage variations in the supply voltage. The results from the model reveal that various sub-synchronous and/or super-synchronous frequency components that exist in the supply voltage as small voltage perturbations can influence the dynamic response of the machine in relation to flicker. In particular, oscillations in the electromagnetic torque and rotor speed arising as a result of the applied voltage perturbations are found to be the key influencing factors controlling the stator current perturbations. It has been noted that, the speed fluctuation caused by a superimposed positive sequence voltage perturbation tends to produce extra emf components in the rotor which in turn can reflect back to the stator. This concept of multiple armature reaction has been found to be significant in large motors especially when the superimposed frequencies are closer to the fundamental frequency. The second phase of the work covers the development of systematic methods for evaluation of flicker transfer in radial and interconnected power systems taking the dynamic behaviour of induction motors into account. In relation to radial systems, small signal models are developed which can be used to establish the flicker propagation from a higher voltage level (upstream) to a lower voltage level (downstream) where induction motor loads are connected. Although this method can be applied for regular or irregular voltage fluctuations, emphasis has been given to sinusoidal voltage fluctuations arising from conventional sinusoidal amplitude modulation of upstream voltage. Moreover, the method examines the propagation of sub-synchronous and super-synchronous frequency components that exist in the supply voltage as side bands and hence determines the overall attenuation in the voltage envelope. The contribution of induction motors of different sizes and other influential factors such as system impedance, loading level of the motor are examined. It has been noted that in general higher frequency components of the upstream fluctuating voltage envelope tend to attenuate better at the downstream. A method is also presented which allows aggregation of induction motors at the load busbars in relation to flicker transfer studies. In relation to interconnected systems, a frequency domain approach which can be used to investigate the flicker transfer is presented. This approach can be considered as an extension to the impedance matrix method as described in the literature and can overcome some of the limitations of the latter method. In the proposed approach, induction motor loads are modelled in a more realistic manner to replicate their dynamic behaviour, thus enabling the examination of the frequency dependent characteristics of flicker attenuation due to induction motors and the influence of tie lines in compensating flicker at remote load busbars consisting of passive loads. To verify some of the theoretical outcomes real time voltage waveforms captured from a large arc furnace site have been used, in addition to the experimental work using a scaled down laboratory set up of a radial power system

    HAUNTING SECRETS: THE PHANTOM OF SHAME LEGACIES THAT KEEP ON GIVING

    Get PDF
    This paper reviews the connections between unspoken transgenerational trauma, shame, and the concepts of hauntology and transgenerational phantom and looks at ways writing can reveal the traces of shame-as-affect. Some transgenerational trauma narratives do not distinguish between trauma-as-event and shame-as-affect/emotion, which can lead to a conflation of the two. This paper proposes that hauntology (the encroachment of an "other) and the transgenerational phantom (the metaphysical manifestation of others' shameful secrets), as conceptual scaffolds, are relevant to deciphering and depicting shame-as-affect distinct to the traumatic event via an understanding of the way speech and writing can bear the traces of shame-as-affect. To demonstrate, this paper provides a close reading of Arundhati Roy's The god of small things and highlights how cryptographic writing—the fissures and distortions in language—can inform the representation of shame in trauma narratives

    Can the ‘Dark Triad’ traits be a predictor of cyber hate speech?

    Get PDF
    Peer reviewed short articl
    corecore