The Potential Use of Cold-Pressed Pumpkin Seed Oil By-Products in a Low-Fat Salad Dressing: The Effect on Rheological, Microstructural, Recoverable Properties, and Emulsion and Oxidative Stability

The cold-pressed pumpkin seed oil by-product (POB) was evaluated for its application as a natural fat substitute and stabilizer in the reduced-fat salad dressings. For this aim, the samples were prepared by combining the xanthan gum (0.2–0.4 g/100 g), POB (1.0–5.0 g/100 g), egg yolk powder (3 g/100 g), and sunflower oil (10–30 g/100 g) in 17 different formulations. The optimization was carried out using response surface methodology (RSM) and full factorial central composite design (CCD). Results showed that all samples presented the shear-thinning (or pseudoplastic) flow behavior with 3.75–16.11 Pa·sn and 0.18–0.30, K and n values, respectively. The flow behavior rheological data were fitted to a power-law model (R2 > 0.99). The samples with high POB and low oil content showed similar K and n values compared to high oil content samples. Additionally, the dynamic rheological properties and three interval thixotropic test (3-ITT) were determined. The G′ value was larger than G″ in all frequency ranges, indicating viscoelastic solid characteristics in all samples. The optimum formulation was determined as 0.384% XG, 10% oil, and 3.04% POB. The samples prepared with the optimum formulation (POBLF-SD) were compared to low-fat (LF-SD), and high-fat (HF-SD) control salad dressing samples based on the rheological properties, emulsion stability, oxidative stability, zeta potential, and particle size. The oxidation kinetic parameters namely, IP, Ea, ΔS++, and ΔG++ showed that the oxidative stability of salad dressing samples could be improved by enriched by POB. The results of the present study demonstrated that POB could be considerably utilized as a natural fat substitute and stabilizer in salad dressing type emulsions

Effect of Different Drying Techniques on Total Bioactive Compounds and Individual Phenolic Composition in Goji Berries

In recent years, interest in the consumption of dried goji berries has increased due to its high bioactive properties. Alternative drying methods that provide faster drying and better preservation of bioactive properties should be developed. This study aims to investigate the effect of different drying methods on the drying time and quality characteristics of the goji berry; namely, hot-air drying (HAD), ultrasound-assisted vacuum drying (USVD), vacuum drying (VD), freeze-drying (FD), and ultrasound-pretreated freeze-drying (USFD). The drying kinetic, total phenolic content, antioxidant capacity, phenolic profile, carotenoid profile, and color change of the goji berry fruit were determined. The drying times for VD, USVD, and HAD varied between 275–1330 min. USVD treatment showed faster drying behavior than the other two drying methods. The total phenolic content (TPC) value of dry samples varied between 1002.53–1238.59 mg GAE/g DM. USVD treatments exhibited a higher total phenolic content (TPC) value than all other drying methods. DPPH and CUPRAC values varied between 15.70–29.90 mg TE/g DM and 40.98–226.09 mg TE/g DM, respectively. The total color change (ΔE) value ranged between 4.59 and 23.93 and HAD dried samples showed the highest ΔE of all samples. The results of the phenolic profile were consistent with TPC analysis. HAD caused higher phenolic compound degradation than VD, USVD, and FD. The results of this study showed that different drying techniques significantly affected the drying rate and retention of bioactive components of the goji berry fruit, and the USVD and VD methods could be used as an alternative to the HAD method. This study concluded that USVD and FD could be considered as suitable drying methods and could be used as alternatives to HAD in the drying of goji berries

The Potential Use of Cold-Pressed Coconut Oil By-Product as an Alternative Source in the Production of Plant-Based Drink and Plant-Based Low-Fat Ice Cream: The Rheological, Thermal, and Sensory Properties of Plant-Based Ice Cream

This study aimed to investigate the potential use of cold-pressed coconut oil by-products (COB) as a low-cost alternative source for plant-based drink and ice cream production. Firstly, a plant-based drink was produced from cold-pressed coconut oil by-products (COB drink) and compared with a commercial coconut drink. The fat, protein, and zeta potential values of coconut drink obtained from COB were higher than those of the commercial samples. In addition, the particle size value of the drink obtained from COB was found to be lower than that of the commercial drink. In the second stage, full-fat and low-fat plant-based ice cream samples using COB drink were produced and compared to control ice cream samples (produced by the commercial coconut drink) in terms of rheological, sensorial, and thermal properties. Rheological analysis showed that all plant-based ice cream samples indicated pseudoplastic, solid-like, and recoverable characteristics. Low-fat commercial control ice cream samples (C1) indicated the lowest K value (9.05 Pasn), whereas the low-fat plant-based ice cream sample produced by the COB drink (COB-3) exhibited the highest K value (17.69 Pasn). ΔHf values of the plant-based ice cream samples varied from 144.70 J/g to 172.70 J/g. The low-fat COB ice cream stabilized with 3% COB and full-fat COB ice cream samples showed lower ΔHf values than control ice cream samples, indicating that the COB ice cream showed desired thermal properties. The COB drink may be utilized in plant-based ice cream without altering sensory qualities, and low-fat ice cream could be manufactured in the same manner to attain full-fat ice cream quality characteristics. The results of this study demonstrated that COB can be successfully used as an inexpensive raw material source in the production of full-fat and reduced-fat vegetable-based ice cream

Capsaicin Rich Low-Fat Salad Dressing: Improvement of Rheological and Sensory Properties and Emulsion and Oxidative Stability

This study aimed to investigate the potential use of cold-pressed hot pepper seed oil by-product (HPOB) in a low-fat salad dressing to improve its rheological properties, emulsion, and oxidative stability. The total phenolic content (TPC), the 2,2-Diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity, and CUPRIC reducing antioxidant capacity (CUPRAC) values were 317.4 mg GAE/100 g, 81.87%, and 6952.8 mg Trolox/100 g, respectively. The capsaicin, dihydrocapsaicin, and total carotenoid content were 175.8 mg/100 g, 71.01 mg/100 g, and 106.3 µg/g, respectively. All emulsions indicated shear-thinning, viscoelastic solid-like behavior, and recoverable characteristics, which were improved via enrichment with HPOB. The thermal loop test showed that the low-fat sample formulated with 3% HPOB indicated little change in the G* value, showing that it exhibited high emulsion stability. The induction period values (IP) of the salad dressing samples containing HPOB (between 6.33 h and 8.33 h) were higher than the IP values of the control samples (3.20 h and 2.58 h). The enrichment with HPOB retarded the formation of oxidative volatile compounds of hexanal, nonanal, and 1-octene-3-ol. According to the results presented in this study, HPOB could be effectively used in a low-fat salad dressing to enhance its rheological characteristics and oxidative stability

Cold-Pressed Okra Seed Oil Byproduct as an Ingredient for Muffins to Decrease Glycemic Index, Maillard Reaction, and Oxidation

This study aimed to investigate the effects of adding cold-pressed okra seed oil byproduct (OSB) to the muffin formulation, as a partial substitute for wheat flour, on the nutritional, physicochemical, rheological, textural, and sensory properties of muffins. The carbohydrate, protein, oil, moisture, and ash contents of OSB were 44.96, 32.34, 10.21, 7.51, and, 4.98%, respectively, indicating that OSB was rich in protein and carbohydrate. All muffin samples showed a shear thinning behavior, indicating that the viscosity of all samples decreased with increasing shear rate. The frequency sweep test showed that all samples showed viscoelastic solid-like structure [G′ (storage modulus)> G″ (loss modulus)]. The K′ values (between 66.45 and 139.14) were higher than the K″ values (between 36.62 and 80.42) for all samples. The result was another indication of the viscoelastic solid characteristic of the samples. In our study, it was found that the fluorescence of advanced Maillard products and soluble tryptophan index decreased with increasing amount of OSB, indicating that OSB addition led to a decrease in the amount of fluorescent Maillard reaction (MR) products. The fortified muffins with more than 10% OSB had a reduced estimated glycemic index (GI) significantly in comparison with control muffin samples (p < 0.05). The induction period (IP) values of the muffin samples containing OSB (between 11:57 and 15:15 h/min) were higher than the IP value of the control sample (10:50 h/min), indicating that OSB improved the oxidative stability of the muffin samples. The addition of OSB has shown no negative effect on sensory attributes considering texture, mouth fell, odor, and taste. This study suggested that the addition of OSB in muffins could improve rheological properties and oxidative stability and decrease GI and the amount of MR products without negative impact on sensory properties