Temperature and strain rate effects on the mechanical properties of a polymer-bonded explosive

© 2018, The Author(s). The aim of the research reported here was to investigate the strain rate and temperature sensitivity of Rowanex 1100 Type 1A, a polymer-bonded explosive (PBX). The stress supported by this PBX at high rates of deformation (1750 ± 225 s−1) was found to be about an order of magnitude greater than that supported at low rates (0.015 s−1). Temperature was also found to have a large effect, with the strength of the material decreasing exponentially with temperature over the range studied (–60 to +60 °C). The exponents for the decay of the PBX’s strength with temperature at both low and high strain rates were the same within experimental error. So a temperature/strain rate shift factor could be determined and was found to be 31.2 ± 2.4 K/decade of strain rate.BAe Systems, Glascoed, U

Behaviour of moist and saturated sand during shock and release

Relatively little is known about the changes that occur in the shock compaction and release of granular matter with varying levels of moisture. Here, we report a series of plate impact experiments giving shock Hugoniot and release data for a well characterized sand at dry, 10% moist, and saturated water contents. The results reveal that at low moisture content the shock impedance is slightly reduced, while the release remains predominantly inelastic. Close to saturation, much more substantial changes occur: the shock impedance stiffens substantially, the Hugoniot appears to split into two branches, and the release becomes almost completely elastic. We discuss mechanisms underpinning these changes in behavior.This work was supported through the Force Protection Engineering research programme led by QinetiQ Plc. on behalf of DSTL.This is the author accepted manuscript. The final version is available from AIP via http://dx.doi.org/10.1063/1.493468

The significance of grain morphology and moisture content on the response of silica sand to ballistic penetration

The dynamic response of sand is of interest for a wide range of applications, from civil engineering to asteroid impact, in addition to defense and industrial processes. Granular dynamics are controlled by a complex network of intergrain force chains; yet, our understanding of how grain morphology, moisture, rate, and loading geometry affect the response to rapid compaction remains limited. Here, we show how just 1% moisture can significantly reduce penetration resistance in silica sand, while smoother-grained material—with a similar bulk density, grain size, and mineralogy—exhibits markedly improved stopping power. Cylindrical targets are impacted by spherical steel projectiles, with Digital Speckle Radiography employed to determine both the penetration depth and the sand bed displacement at a series of incremental time steps after impact. The results provide substantial insight into how slight adjustments to grain-grain contact points can affect the bulk dynamic response of brittle granular materials.</jats:p

Calcitization of aragonitic bryozoans in Cenozoic tropical carbonates from East Kalimantan, Indonesia

© The Author(s) 2016. Open Access. This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The file attached is the published version of the article

Characterisation of the impact response of energetic materials: Observation of a low-level reaction in 2,6-diamino-3,5-dinitropyrazine-1-oxide (LLM-105)

Time resolved and integrated diagnostics including high speed photography, mass and optical spectroscopy, and optical-radiometry used to study impact response of high explosives in far more detail than possible with conventional sensitiveness tests.The authors wish to acknowledge the funding and provision of samples for this research by AWE plc.This is the author accepted manuscript. The final version is available from the Royal Society of Chemistry via http://dx.doi.org/10.1039/C6RA03096

Prediction of the ballistic limit of an aluminium sandwich panel

This paper presents research on modelling the impact of a 150g projectile on a 35mm thick aluminium sandwich panel. The objective of the work is a predictive modelling capability for the ballistic limit of the panel. A predictive modelling capability supports the design of capture and deorbit missions for large items of space debris such as satellites and rocket upper stages. A detailed explicit finite element model was built using the LSDYNA software and results were compared with experimental data for the projectile exit velocity to establish key parameters. The primary parameters influencing the model behaviour were the strength and failure of the aluminium face sheets and the friction between projectile and panel. The model results showed good agreement with experimental results for ogive nose projectiles, but overestimated the exit velocity for flat nose projectiles.This work was funded by the European Space Agency under a contract with Airbus Defence and Space

Variation in post-colonoscopy colorectal cancer across colonoscopy providers in English National Health Service: population based cohort study

Objectives: To quantify post-colonoscopy colorectal cancer (PCCRC) rates in England by using recent World Endoscopy Organisation guidelines, compare incidence among colonoscopy providers, and explore associated factors that could benefit from quality improvement initiatives. Design: Population based cohort study. Setting: National Health Service in England between 2005 and 2013. Population: All people undergoing colonoscopy and subsequently diagnosed as having colorectal cancer up to three years after their investigation (PCCRC-3yr). Main outcome measures: National trends in incidence of PCCRC (within 6-36 months of colonoscopy), univariable and multivariable analyses to explore factors associated with occurrence, and funnel plots to measure variation among providers. Results: The overall unadjusted PCCRC-3yr rate was 7.4% (9317/126 152), which decreased from 9.0% in 2005 to 6.5% in 2013 (P<0.01). Rates were lower for colonoscopies performed under the NHS bowel cancer screening programme (593/16 640, 3.6%), while they were higher for those conducted by non-NHS providers (187/2009, 9.3%). Rates were higher in women, in older age groups, and in people with inflammatory bowel disease or diverticular disease, in those with higher comorbidity scores, and in people with previous cancers. Substantial variation in rates among colonoscopy providers remained after adjustment for case mix. Conclusions: Wide variation exists in PCCRC-3yr rates across NHS colonoscopy providers in England. The lowest incidence was seen in colonoscopies performed under the NHS bowel cancer screening programme. Quality improvement initiatives are needed to address this variation in rates and prevent colorectal cancer by enabling earlier diagnosis, removing premalignant polyps, and therefore improving outcomes

Association of Exposure to Phthalates with Endometriosis and Uterine Leiomyomata: Findings from NHANES, 1999-2004

BACKGROUND. Phthalates are ubiquitous chemicals used in consumer products. Some phthalates are reproductive toxicants in experimental animals, but human data are limited. OBJECTIVE. We conducted a cross-sectional study of urinary phthalate metabolite concentrations in relation to self-reported history of endometriosis and uterine leiomyomata among 1,227 women 20-54 years of age from three cycles of the National Health and Nutrition Examination Survey (NHANES), 1999-2004. METHODS. We examined four phthalate metabolites: mono(2-ethylhexyl) phthalate (MEHP), monobutyl phthalate (MBP), monoethyl phthalate (MEP), and monobenzyl phthalate (MBzP). From the last two NHANES cycles, we also examined mono(2-ethyl-5-hydroxyhexyl) phthalate (MEHHP) and mono(2-ethyl-5-oxohexyl) phthalate (MEOHP). We used logistic regression to estimate odds ratios (ORs) and 95% confidence intervals (CIs), adjusting for potential confounders. RESULTS. Eighty-seven (7%) and 151 (12%) women reported diagnoses of endometriosis and leiomyomata, respectively. The ORs comparing the highest versus lowest three quartiles of urinary MBP were 1.36 (95% CI, 0.77-2.41) for endometriosis, 1.56 (95% CI, 0.93-2.61) for leiomyomata, and 1.71 (95% CI, 1.07-2.75) for both conditions combined. The corresponding ORs for MEHP were 0.44 (95% CI, 0.19-1.02) for endometriosis, 0.63 (95% CI, 0.35-1.12) for leiomyomata, and 0.59 (95% CI, 0.37-0.95) for both conditions combined. Findings for MEHHP and MEOHP agreed with findings for MEHP with respect to endometriosis only. We observed null associations for MEP and MBzP. Associations were similar when we excluded women diagnosed > 7 years before their NHANES evaluation. CONCLUSION. The positive associations for MBP and inverse associations for MEHP in relation to endometriosis and leiomyomata warrant investigation in prospective studies