9 research outputs found
Enhancing Wildfire Propagation Model Predictions Using Aerial Swarm-Based Real-Time Wind Measurements:A Conceptual Framework
The dynamic behaviour of wildfires is mainly influenced by weather, fuel, and topography. Based on fundamental conservation laws involving numerous physical processes and large scales, atmospheric models require substantial computational resources. Therefore, coupling wildfire and atmospheric models is impractical for high resolutions. Instead, a static atmospheric wind field is typically input into the wildfire model, either as boundary conditions on the control surface or distributed over the control volume. Wildfire propagation models may be (i) data-driven; theoretical; or mechanistic surrogates. Data-driven models are beyond the scope of this paper. Theoretical models are based on conservation laws (species, energy, mass, momentum) and are, therefore, computationally intensive; e.g. the Fire Dynamics Simulator (FDS). Mechanistic surrogate models do not closely follow fire dynamics laws, but related laws observed to make predictions more efficiently with sufficient accuracy; e.g. FARSITE, and FDS with the Level Set model (FDS-LS). Whether theoretical or mechanistic surrogate, these wildfire models may be coupled with or decoupled from wind models (e.g. Navier-Stokes equations). Only coupled models account for the effect of the fire on the wind field. In this paper, a series of simulations of wildfire propagation on grassland are performed using FDS-LS to study the impact of the fire-induced wind on the fire propagation dynamics. Results show that coupling leads to higher Rates of Spread (RoS), closer to those reported from field experiments, with increasing wind speeds and higher terrain slopes strengthening this trend. Aiming to capture the fire–wind interaction without the hefty cost of solving Navier-Stokes equations, a conceptual framework is proposed: 1) a swarm of unmanned aerial vehicles measure wind velocities at flight height; 2) the wind field is constructed with the acquired data; 3) the high-altitude wind field is mapped to near-surface, and 4) the near-surface wind field is fed into the wildfire model periodically. A series of simulations are performed using an in-house decoupled physics-based reduced-order fire propagation model (FireProM-F) enhanced by wind field “measurements”. In this proof of concept, wind velocities are not measured but extracted from physics-based Large Eddy Simulations taken as ground truth. Unsurprisingly, higher measurement frequencies lead to more accurate and realistic predictions of the propagating fire front. An initial attempt is made to study the effect of wind measurement uncertainty on the model predictions by adding Gaussian noise. Preliminary results show that higher noise leads to the fire front displaying more irregular shapes and slower propagation
Boosting ensembles for estimation of discharge coefficient and through flow discharge in broad-crested gabion weirs
Vegetation Cover Type Classification Using Cartographic Data for Prediction of Wildfire Behaviour
Vegetation Cover Type Classification Using Cartographic Data for Prediction of Wildfire Behaviour
Predicting the behaviour of wildfires can help save lives and reduce health, socioeconomic, and environmental impacts. Because wildfire behaviour is highly dependent on fuel type and distribution, their accurate estimation is paramount for accurate prediction of the fire propagation dynamics. This paper studies the effect of combining automated hyperparameter tuning with Bayesian optimisation and recursive feature elimination on the accuracy of three boosting (AdaB, XGB, CatB), two bagging (Random Forest, Extremely Randomised Trees), and three stacking ensemble models with respect to their ability to estimate the vegetation cover type from cartographic data. The models are trained on the University of California Irvine (UCI) cover type dataset using five-fold cross-validation. Feature importance scores are calculated and used in recursive feature elimination analysis to study the sensitivity of model accuracy to the different feature combinations. Our results indicate that the implemented fine-tuning procedure significantly affects the accuracy of all models investigated, with XGB achieving an overall accuracy of 97.1% slightly outperforming the others
Comparison of the effect of one-way and two-way fire-wind coupling on the modelling of wildland fire propagation dynamics
Simulation of flow pattern at rectangular lateral intake with different dike and submerged vane scenarios
A comprehensive understanding of the sediment behavior at the entrance of diversion channels requires complete knowledge of three-dimensional (3D) flow behavior around such structures. Dikes and submerged vanes are typical structures used to control sediment entrainment in the diversion channel. In this study, a 3D computational fluid dynamic (CFD) code was calibrated with experimental data and used to evaluate flow patterns, the diversion ratio of discharge, the strength of secondary flow, and dimensions of the vortex inside the channel in various dike and submerged vane installation scenarios. Results show that the diversion ratio of discharge in the diversion channel is dependent on the width of the flow separation plate in the main channel. A dike perpendicular to the flow with a narrowing ratio of 0.20 doubles the ratio of diverted discharge in addition to reducing suspended sediment input to the basin, compared with a no-dike situation, by creating the outer arch conditions. A further increase in the narrowing ratio decreases the diverted discharge. In addition, increasing the longitudinal distance between consecutive vanes (Ls) increases the velocity gradient between the vanes and leads to a more severe erosion of the bed, near the vanes
Boosting ensembles for estimation of discharge coefficient and through flow discharge in broad-crested gabion weirs
Abstract Gabion weirs are environment-friendly structures widely used for irrigation and drainage network purposes. These structures' hydraulic performance is fundamentally different from solid weirs' due to their porosity and the existence of a through-flow discharge. This paper investigates the reliability and suitability of a number of Machine learning models for estimation of hydraulic performance of gabion weirs. Generally, three different Boosting ensemble models, including Gradient Boosting, XGBoost, and CatBoost, are compared to the well-known Random Forest and a Stacked Regression model, with respect to their accuracy in prediction of the discharge coefficient and through-flow discharge ratio of gabion weirs in free flow conditions. The Bayesian optimization approach is used to fine-tune model hyper-parameters automatically. Recursive feature elimination analysis is also performed to find optimum combination of features for each model. Results indicate that the CatBoost model has outperformed other models in terms of estimating the through flow discharge ratio (Q in /Q t ) with R 2 = 0.982, while both XGBoost and CatBoost models have shown close performance in terms of estimating the discharge coefficient (C d ) with R 2 of CatBoost equal to 0.994 and R 2 of XGBoost equal to 0.992. Weakest results were also produced by Decision tree regressor with R 2 = 0.821 and 0.865 for estimation of C d and Qin/Qt values