2,078 research outputs found
Piazza: Data Management Infrastructure for Semantic Web Applications
The Semantic Web envisions a World Wide Web in which data is described with rich semantics and applications can pose complex queries. To this point, researchers have defined new languages for specifying meanings for concepts and developed techniques for reasoning about them, using RDF as the data model. To flourish, the Semantic Web needs to be able to accommodate the huge amounts of existing data and the applications operating on them. To achieve this, we are faced with two problems. First, most of the world\u27s data is available not in RDF but in XML; XML and the applications consuming it rely not only on the domain structure of the data, but also on its document structure. Hence, to provide interoperability between such sources, we must map between both their domain structures and their document structures. Second, data management practitioners often prefer to exchange data through local point-to-point data translations, rather than mapping to common mediated schemas or ontologies. This paper describes the Piazza system, which addresses these challenges. Piazza offers a language for mediating between data sources on the Semantic Web, which maps both the domain structure and document structure. Piazza also enables interoperation of XML data with RDF data that is accompanied by rich OWL ontologies. Mappings in Piazza are provided at a local scale between small sets of nodes, and our query answering algorithm is able to chain sets mappings together to obtain relevant data from across the Piazza network. We also describe an implemented scenario in Piazza and the lessons we learned from it
Acid-base and complexing properties of some δ-hydroxyalkenylphosphine oxides
Four new compounds, asymmetrical phosphine oxides containing 2-hydroxyphenylethenyl fragment in cis-orientation with respect to the phosphine oxide: dibutyl-, diphenyl-, dibenzyl-, and dinaphthyl-2-(2-hydroxy-5- chlorophenyl)-2-phenyl-ethenylphospnine oxides, have been studied in aqueous ethanol (80 vol % of EtOH) by means of potentiometry and spectrophotometry at 25±0.1 C, and their acid-base and complexing properties estimated. © 2013 Pleiades Publishing, Ltd
Schema Mediation for Large-Scale Semantic Data Sharing
Intuitively, data management and data integration tools should be well suited for exchanging information in a semantically meaningful way. Unfortunately, they suffer from two significant problems: they typically require a common and comprehensive schema design before they can be used to store or share information, and they are difficult to extend because schema evolution is heavyweight and may break backward compatibility. As a result, many large-scale data sharing tasks are more easily facilitated by non-database-oriented tools that have little support for semantics.
The goal of the peer data management system (PDMS) is to address this need: we propose the use of a decentralized, easily extensible data management architecture in which any user can contribute new data, schema information, or even mappings between other peers schemas. PDMSs represent a natural step beyond data integration systems, replacing their single logical schema with an interlinked collection of semantic mappings between peers individual schemas.
This paper considers the problem of schema mediation in a PDMS. Our first contribution is a flexible language for mediating between peer schemas that extends known data integration formalisms to our more complex architecture. We precisely characterize the complexity of query answering for our language. Next, we describe a reformulation algorithm for our language that generalizes both global-as-view and local-as-view query answering algorithms. Then we describe several methods for optimizing the reformulation algorithm and an initial set of experiments studying its performance. Finally, we define and consider several global problems in managing semantic mappings in a PDMS
Topology of energy surfaces and existence of transversal Poincar\'e sections
Two questions on the topology of compact energy surfaces of natural two
degrees of freedom Hamiltonian systems in a magnetic field are discussed. We
show that the topology of this 3-manifold (if it is not a unit tangent bundle)
is uniquely determined by the Euler characteristic of the accessible region in
configuration space. In this class of 3-manifolds for most cases there does not
exist a transverse and complete Poincar\'e section. We show that there are
topological obstacles for its existence such that only in the cases of
and such a Poincar\'e section can exist.Comment: 10 pages, LaTe
Finding a Needle in the Haystack: A Technique for Ranking Matches Between Components
Abstract. Searching and subsequently selecting reusable components from com-ponent repositories has become a key impediment for not only component-based development but also for achieving the overall usability of component develop-ment environments and the ultimate re-usability of the components themselves. Component matching, a fundamental aspect of the component search problem, has been a well-studied problem, resulting in many different matching technique
Performance of a Large-Area GEM Detector Prototype for the Upgrade of the CMS Muon Endcap System
Gas Electron Multiplier (GEM) technology is being considered for the forward
muon upgrade of the CMS experiment in Phase 2 of the CERN LHC. Its first
implementation is planned for the GE1/1 system in the region of the muon endcap mainly to control muon level-1 trigger rates
after the second long LHC shutdown. A GE1/1 triple-GEM detector is read out by
3,072 radial strips with 455 rad pitch arranged in eight -sectors.
We assembled a full-size GE1/1 prototype of 1m length at Florida Tech and
tested it in 20-120 GeV hadron beams at Fermilab using Ar/CO 70:30 and
the RD51 scalable readout system. Four small GEM detectors with 2-D readout and
an average measured azimuthal resolution of 36 rad provided precise
reference tracks. Construction of this largest GEM detector built to-date is
described. Strip cluster parameters, detection efficiency, and spatial
resolution are studied with position and high voltage scans. The plateau
detection efficiency is [97.1 0.2 (stat)]\%. The azimuthal resolution is
found to be [123.5 1.6 (stat)] rad when operating in the center of
the efficiency plateau and using full pulse height information. The resolution
can be slightly improved by 10 rad when correcting for the bias due
to discrete readout strips. The CMS upgrade design calls for readout
electronics with binary hit output. When strip clusters are formed
correspondingly without charge-weighting and with fixed hit thresholds, a
position resolution of [136.8 2.5 stat] rad is measured, consistent
with the expected resolution of strip-pitch/ = 131.3 rad. Other
-sectors of the detector show similar response and performance.Comment: 8 pages, 32 figures, submitted to Proc. 2014 IEEE Nucl. Sci.
Symposium, Seattle, WA, reference adde
Quality control and beam test of GEM detectors for future upgrades of the CMS muon high rate region at the LHC
Gas Electron Multipliers (GEM) are a proven position sensitive gas detector technology which nowadays is becoming more widely used in High Energy Physics. GEMs offer an excellent spatial resolution and a high particle rate capability, with a close to 100% detection efficiency. In view of the high luminosity phase of the CERN Large Hadron Collider, these aforementioned features make GEMs suitable candidates for the future upgrades of the Compact Muon Solenoid (CMS) detector. In particular, the CMS GEM Collaboration proposes to cover the high-eta region of the muon system with large-area triple-GEM detectors, which have the ability to provide robust and redundant tracking and triggering functions. In this contribution, after a general introduction and overview of the project, the construction of full-size trapezoidal triple-GEM prototypes will be described in more detail. The procedures for the quality control of the GEM foils, including gain uniformity measurements with an x-ray source will be presented. In the past few years, several CMS triple-GEM prototype detectors were operated with test beams at the CERN SPS. The results of these test beam campaigns will be summarised
Overview of large area triple-GEM detectors for the CMS forward muon upgrade
In order to cope with the harsh environment expected from the high luminosity LHC, the CMS forward muon system requires an upgrade. The two main challenges expected in this environment are an increase in the trigger rate and increased background radiation leading to a potential degradation of the particle ID performance. Additionally, upgrades to other subdetectors of CMS allow for extended coverage for particle tracking, and adding muon system coverage to this region will further enhance the performance of CMS
A novel application of Fiber Bragg Grating (FBG) sensors in MPGD
We present a novel application of Fiber Bragg Grating (FBG) sensors in the
construction and characterisation of Micro Pattern Gaseous Detector (MPGD),
with particular attention to the realisation of the largest triple (Gas
electron Multiplier) GEM chambers so far operated, the GE1/1 chambers of the
CMS experiment at LHC. The GE1/1 CMS project consists of 144 GEM chambers of
about 0.5 m2 active area each, employing three GEM foils per chamber, to be
installed in the forward region of the CMS endcap during the long shutdown of
LHC in 2108-2019. The large active area of each GE1/1 chamber consists of GEM
foils that are mechanically stretched in order to secure their flatness and the
consequent uniform performance of the GE1/1 chamber across its whole active
surface. So far FBGs have been used in high energy physics mainly as high
precision positioning and re-positioning sensors and as low cost, easy to
mount, low space consuming temperature sensors. FBGs are also commonly used for
very precise strain measurements in material studies. In this work we present a
novel use of FBGs as flatness and mechanical tensioning sensors applied to the
wide GEM foils of the GE1/1 chambers. A network of FBG sensors have been used
to determine the optimal mechanical tension applied and to characterise the
mechanical tension that should be applied to the foils. We discuss the results
of the test done on a full-sized GE1/1 final prototype, the studies done to
fully characterise the GEM material, how this information was used to define a
standard assembly procedure and possible future developments.Comment: 4 pages, 4 figures, presented by Luigi Benussi at MPGD 2015 (Trieste,
Italy). arXiv admin note: text overlap with arXiv:1512.0848
- …