Intrinsic hardness of constitutive phases in WC–Co composites:Nanoindentation testing, statistical analysis, WC crystal orientation effectsand flow stress for the constrained metallic binder

The intrinsic hardness of the constitutive phases in WC–Co composites is investigated by combining experimental and statistical analysis nanoindentation techniques. It is done on the basis of considering the cemented carbide material as effectively heterogeneous at the microstructure scale, i.e. consisting of three phases defined by either different chemical nature (carbides and binder) or distinct carbide crystal orientation (i.e. with surface normal perpendicular to either basal or prismatic planes). As main outcome, experimentally measured and statistically significant intrinsic hardness values for the defined phases (WC and constrained metallic binder) are analyzed and determined. Besides the evidence of crystal anisotropy for the WC phase, they permit to identify and account the expected strengthening of the plastic-constrained metallic binder, a critical input parameter for hardness and toughness modelling as well as for microstructural design optimization of ceramic composites reinforced by ductile metallic ligamentsPeer ReviewedPostprint (author's final draft

Influence of the mean carbide size on the micromechanical response of WC-Co hardmetals

Postprint (published version

Microstructural influence on tolerance to corrosion-induced damage in hardmetals

The influence of the microstructure on the tolerance of WC-Co cemented carbides to corrosion damage was studied by using residual strength as the critical design parameter. In doing so, samples were immersed in synthetic mine water solution for different times, and changes induced by corrosion exposure were assessed. A detailed 3D FIB/FESEM tomography characterization of corrosion damage-microstructure interactions is included. Results reveal that corrosion damage may result in relevant strength degradation on the basis of stress rising effects associated with the formation of surface corrosion pits. Thus, as immersion time increases strength gradually decreases. Fractographic examination reveals the formation of semi-elliptical and sharp corrosion pits for studied medium- and ultrafine-sized cemented carbides, respectively. The latter has a much more pronounced stress rising effect, and consequently higher strength losses were determined for ultrafine grades. Corrosion process consists of a selective attack of the binder that is dissolved in the corrosive media. Initially, it is located at centres of binder pools and as exposure time in the media increases, corrosion evolves consuming the rest of the pools which finally leaves an unsupported WC grain skeleton at the surface.Peer Reviewe

Microstructural influence on tolerance to corrosion-induced damage in hardmetals

The influence of the microstructure on the tolerance of WC-Co cemented carbides to corrosion damage was studied by using residual strength as the critical design parameter. In doing so, samples were immersed in synthetic mine water solution for different times, and changes induced by corrosion exposure were assessed. A detailed 3D FIB/FESEM tomography characterization of corrosion damage-microstructure interactions is included. Results reveal that corrosion damage may result in relevant strength degradation on the basis of stress rising effects associated with the formation of surface corrosion pits. Thus, as immersion time increases strength gradually decreases. Fractographic examination reveals the formation of semi-elliptical and sharp corrosion pits for studied medium- and ultrafine-sized cemented carbides, respectively. The latter has a much more pronounced stress rising effect, and consequently higher strength losses were determined for ultrafine grades. Corrosion process consists of a selective attack of the binder that is dissolved in the corrosive media. Initially, it is located at centres of binder pools and as exposure time in the media increases, corrosion evolves consuming the rest of the pools which finally leaves an unsupported WC grain skeleton at the surface.Peer Reviewe

Intrinsic hardness of constitutive phases in WC–Co composites:Nanoindentation testing, statistical analysis, WC crystal orientation effectsand flow stress for the constrained metallic binder

The intrinsic hardness of the constitutive phases in WC–Co composites is investigated by combining experimental and statistical analysis nanoindentation techniques. It is done on the basis of considering the cemented carbide material as effectively heterogeneous at the microstructure scale, i.e. consisting of three phases defined by either different chemical nature (carbides and binder) or distinct carbide crystal orientation (i.e. with surface normal perpendicular to either basal or prismatic planes). As main outcome, experimentally measured and statistically significant intrinsic hardness values for the defined phases (WC and constrained metallic binder) are analyzed and determined. Besides the evidence of crystal anisotropy for the WC phase, they permit to identify and account the expected strengthening of the plastic-constrained metallic binder, a critical input parameter for hardness and toughness modelling as well as for microstructural design optimization of ceramic composites reinforced by ductile metallic ligamentsPeer Reviewe