Bangladesh's Export Opportunities in the Indian Market : Addressing Barriers and Strategies for Future

India, Bangladesh, trade, economic integration, revealed comparative advantages, tariff barriers

New Electronically Tunable Third Order Filters and Dual Mode Sinusoidal Oscillator Using VDTAs and Grounded Capacitors

This study introduces a third order filter and a third order oscillator configuration. Both the circuits use two voltage difference transconductance amplifiers (VDTAs) and three grounded capacitors. By selecting the input and output terminals properly, current mode and transimpedance mode low-pass and band-pass filters can be obtained without component matching conditions. The natural frequency (ω0) can be tuned electronically. The oscillator circuit provides voltage and current outputs explicitly. The condition of oscillation (CO) and the frequency of oscillation (FO) can be adjusted orthogonally and electronically. The workability of the configurations is judged using TSMC CMOS 0.18 μm technology parameter as well as commercially available LM13700 integrated circuits (ICs). The simulation results show that: for ±0.9V power supply, the power consumption is 1.08 mW for both the configurations, while total harmonic distortions (THDs) are less than 2.06% and 2.17% for the filter and oscillator configurations, respectively

Tunable Lossy and Lossless Grounded Inductors Using Minimum Active and Passive Components

In this contribution, nine new Grounded Inductance Simulators (GISs) using a single Multiple-Output Current Controlled Current Conveyor Transconductance Amplifier (MO-CCCCTA) and one grounded capacitor are proposed. Among them, two are lossless types and seven are lossy types. The use of a single grounded capacitor makes the circuits suitable for fabrication. All the proposed circuits are electronically tunable through the bias currents of MO-CCCCTA. Furthermore, no component matching conditions are needed for realizing them. The designed circuits are verified through PSPICE simulator with ± 0.9 V power supply. The simulation results show that for all the proposed circuits: maximum operating frequencies are about 12 MHz, power dissipation is less than 0.784 mW, Total Harmonic Distortions (THDs) are under 8.09%, and maximum output voltage noise at 1 MHz frequency is 14.094 nV/√Hz. To exhibit the workability of the proposed circuits, they are used to design band-pass, low-pass filter, parallel RLC resonator, and parasitic inductance cancelator

Outdoor performance of a reflective type 3D LCPV system under different climatic conditions

Concentrating sunlight and focusing on smaller solar cells increases the power output per unit solar cell area. In the present study, we highlight the design of a low concentrating photovoltaic (LCPV) system and its performance in different test conditions. The system essentially consists of a reflective type 3.6× cross compound parabolic concentrator (CCPC) designed for an acceptance angle of ± 30°, coupled with square shaped laser grooved buried contact (LGBC) silicon solar cells. A heat exchanger is also integrated with the PV system which extracts the thermal energy rejected by the solar cells whilst maintaining its temperature. Indoor characterization is carried out to evaluate the system performance under standard conditions. Results showed a power ratio of 3.12 and an optical efficiency of 73%. The system is placed under outdoor environment on a south facing roof at Penryn, UK with a fixed angular tilt of 50°. The high angular acceptance of the system allows collection of sunlight over a wider range. Results under different climatic conditions are presented and compared with a non-concentrating system under similar conditions. On an average, the LCPV system was found to collect an average of 2.54 times more solar energy than a system without the concentrator

ANTI-INFLAMMATORY AND PROTECTIVE PROPERTIES OF ALOE VERA LEAF CRUDE GEL IN CARRAGEENAN INDUCED ACUTE INFLAMMATORY RAT MODELS

Objectives: Current clinical treatment regimes for inflammatory diseases have different drawbacks including side effects of the drugs and the high cost of long term treatment. In the last few decades different promising herbal medicines have been explored for their anti-inflammatory and anti-rheumatic effects, but conclusive evidences are not available in the case of crude Aloe vera gel for its anti-inflammatory effects. The objective of the study was to document the protective and curative roles of orally administered and peritoneally injected crude wild Aloe vera gel in carrageenan-induced inflammation in a rat model. Methods: Inflammation was induced by injecting 1% carrageenan in the left hind paw of Wistar albino rat. Crude, unprocessed Aloe vera gel was peritoneally injected and orally fed to experimental and control rat groups to investigate its effect on paw joint edema by measuring the paw circumference with vernier caliper. MTT [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide] cell viability assay was performed to investigate the cytotoxic effect of the gel. Results: Paw edema was brought to near normal levels in the experimental groups after the treatment with crude Aloe vera gel. Orally fed gel showed no cytotoxicity on macrophages and spleenocytes. Protective property of crude Aloe gel was also evident in both the experiments. Conclusion: Aloe vera crude gel has both protective and curative properties against inflammation

Voltage Differencing Current Conveyor Based Voltage-Mode and Current-Mode Universal Biquad Filters with Electronic Tuning Facility

The objective of this study is to present four new universal biquad filters, two voltage-mode multi-input-single-output (MISO), and two current-mode single-input-multi-output (SIMO). The filters employ one voltage differencing current conveyor (VDCC) as an active element and two capacitors along with two resistors as passive elements. All the five filter responses, i.e., high-pass, low-pass, band-pass, band-stop, and all-pass responses, are obtained from the same circuit topology. Moreover, the pole frequency and quality factor are independently tunable. Additionally, they do not require any double/inverted input signals for response realization. Furthermore, they enjoy low active and passive sensitivities. Various regular analyses support the design ideas. The functionality of the presented filters are tested by PSPICE simulations using TSMC 0.18 µm technology parameters with ± 0.9 V supply voltage. The circuits are also justified experimentally by creating the VDCC block using commercially available OPA860 ICs. The experimental and simulation results agree well with the theoretically predicted results

Deficit Financing and Inflation in Bangladesh: A Vector Autoregressive Analysis

This paper analyses the dynamics of inflation in Bangladesh using vector autoregressive methods over the period from July 1999 to August 2008. Demand side factors are assessed in comparison with cost-push influences with a particular focus on the role of government borrowing from the domestic banking system. Over the sample period, previous values of inflation are the most significant source of inflation in the short-term, followed by net credit to the government. The results suggest that the management of expectations and the mode of budget financing are the most important focus areas for future price stability efforts