Quasiparticle states around a nonmagnetic impurity in electron-doped iron-based superconductors with spin-density-wave order

The quasiparticle states around a nonmagnetic impurity in electron-doped iron-based superconductors with spin-density-wave (SDW) order are investigated as a function of doping and impurity scattering strength. In the undoped sample, where a pure SDW state exists, two impurity-induced resonance peaks are observed around the impurity site and they are shifted to higher (lower) energies as the strength of the positive (negative) scattering potential (SP) is increased. For the doped samples where the SDW order and the superconducting order coexist, the main feature is the existence of sharp in-gap resonance peaks whose positions and intensity depend on the strength of the SP and the doping concentration. In all cases, the local density of states exhibits clear $C_2$ symmetry. We also note that in the doped cases, the impurity will divide the system into two sublattices with distinct values of magnetic order. Here we use the band structure of a two-orbital model, which considers the asymmetry of the As atoms above and below the Fe-Fe plane. This model is suitable to study the properties of the surface layers in the iron-pnictides and should be more appropriate to describe the scanning tunneling microscopy experiments.Comment: 11 pages, 18 figure

Pharmacokinetic/Pharmacodynamic Correlation of Cefquinome Against Experimental Catheter-Associated Biofilm Infection Due to Staphylococcus aureus.

Biofilm formations play an important role in Staphylococcus aureus pathogenesis and contribute to antibiotic treatment failures in biofilm-associated infections. The aim of this study was to evaluate the pharmacokinetic/pharmacodynamic (PK/PD) profiles of cefquinome against an experimental catheter-related biofilm model due to S. aureus, including three clinical isolates and one non-clinical isolate. The minimal inhibitory concentration (MIC), minimal biofilm inhibitory concentration (MBIC), biofilm bactericidal concentration (BBC), minimal biofilm eradication concentration (MBEC) and biofilm prevention concentration (BPC) and in vitro time-kill curves of cefquinome were studied in both planktonic and biofilm cells of study S. aureus strains. The in vivo post-antibiotic effects (PAEs), PK profiles and efficacy of cefquinome were performed in the catheter-related biofilm infection model in murine. A sigmoid E max model was utilized to determine the PK/PD index that best described the dose-response profiles in the model. The MICs and MBICs of cefquinome for the four S. aureus strains were 0.5 and 16 μg/mL, respectively. The BBCs (32-64 μg/mL) and MBECs (64-256 μg/mL) of these study strains were much higher than their corresponding BPC values (1-2 μg/mL). Cefquinome showed time-dependent killing both on planktonic and biofilm cells, but produced much shorter PAEs in biofilm infections. The best-correlated PK/PD parameters of cefquinome for planktonic and biofilm cells were the duration of time that the free drug level exceeded the MIC (fT > MIC, R (2) = 96.2%) and the MBIC (fT > MBIC, R (2) = 94.7%), respectively. In addition, the AUC24h/MBIC of cefquinome also significantly correlated with the anti-biofilm outcome in this model (R (2) = 93.1%). The values of AUC24h/MBIC for biofilm-static and 1-log10-unit biofilm-cidal activity were 22.8 and 35.6 h; respectively. These results indicate that the PK/PD profiles of cefquinome could be used as valuable guidance for effective dosing regimens treating S. aureus biofilm-related infections

Linezolid and Rifampicin Combination to Combat cfr-Positive Multidrug-Resistant MRSA in Murine Models of Bacteremia and Skin and Skin Structure Infection.

Linezolid resistance mediated by the cfr gene in MRSA represents a global concern. We investigated relevant phenotype differences between cfr-positive and -negative MRSA that contribute to pathogenesis, and the efficacy of linezolid-based combination therapies in murine models of bacteremia and skin and skin structure infection (SSSI). As a group, cfr-positive MRSA exhibited significantly reduced susceptibilities to the host defense peptides tPMPs, human neutrophil peptide-1 (hNP-1), and cathelicidin LL-37 (P < 0.01). In addition, increased binding to fibronectin (FN) and endothelial cells paralleled robust biofilm formation in cfr-positive vs. -negative MRSA. In vitro phenotypes of cfr-positive MRSA translated into poor outcomes of linezolid monotherapy in vivo in murine bacteremia and SSSI models. Importantly, rifampicin showed synergistic activity as a combinatorial partner with linezolid, and the EC50 of linezolid decreased 6-fold in the presence of rifampicin. Furthermore, this combination therapy displayed efficacy against cfr-positive MRSA at clinically relevant doses. Altogether, these data suggest that the use of linezolid in combination with rifampicin poses a viable therapeutic alternative for bacteremia and SSSI caused by cfr-positive multidrug resistant MRSA

New dual-mode orthogonal tunable fluorescence systems based on cucurbit[8]uril: White light, 3D printing, and anti-counterfeit applications

In this work, we have utilized a supramolecular approach to control emission, and generate white light and have applied the system to both 3D printing and counterfeiting applications. In particular, we report two new dual-mode orthogonal tunable fluorescence systems, A and B. System A is based on the fluorescent dyes perylene diimide (PDI-C6) and 7-hydroxycoumarin, which are incorporated into the main guest system, namely cucurbit[8]uril (Q[8]). This system can provide bright white emission and proved to be adaptable, whereby the emission can be easily changed via temperature control; a smart temperature control switch in the range of 30 °C to 100 °C was developed. System B is based on quinine sulfate with PDI-C6 and Q[8], and this system can provide white emission over a wide concentration range and it was applied to LED lamps. Such white emission also performs well in polymeric matrices and can be utilized for 3D printing, whilst solutions can be used for more practical applications, for example as anti-counterfeiting materials

The role of quality of care and attitude towards disability in the relationship between severity of disability and quality of life: findings from a cross-sectional survey among people with physical disability in China

Background: People with physical disability (PWPD) is the largest subgroup of people with disability (PWD) in China, but few studies have been conducted among this vulnerable population. The objective of this study was to investigate the level of quality of life (QoL), self-perceived quality of care and support (QOCS), severity of disability and personal attitude towards disability among people with physical disability in China, as well as to identify how QoL can be affected by severity of disability through QOCS and personal attitude towards disability among PWPD. Methods: A cross-sectional study was conducted among 1,853 PWPD in Guangzhou, China. Data were collected on participants’ QoL, QOCS, personal attitude towards disability and severity of disability. Structural equation modeling was used to examine the effects of the other variables on QoL. Results: Even with a mild disability (mean score:1.72), relatively low levels of QoL (mean score: 2.65- 3.22) and QOCS (mean score: 2.95 to 3.28), as well as unfavorable personal attitude towards disability (mean score: 2.75 to 3.36) were identified among PWPD. According to SEM, we found that the influence of severity of physical disability on QoL is not only exerted directly, but is also indirectly through QOCS and their personal attitudes towards disability, with QOCS playing a more important mediating role than PWPD’s attitudes towards their own disability. Conclusions: Unfavorable health status was identified among PWPD in China. Focusing on improvement of assistance and care services has the potential to substantially improve PWPD’s QoL. Further research should focus on understanding the needs and their current state of health care of PWPD in China thus being able to develop better interventions for them

Relationship between low molecular weight heparin calcium therapy and prognosis in severe acute kidney injury in sepsis: Mendelian randomized analysis and retrospective study

BackgroundSepsis-associated acute kidney injury (SA-AKI) poses an independent risk for mortality due to the absence of highly sensitive biomarkers and a specific treatment plan.ObjectiveInvestigate the association between low molecular weight heparin (LMWH) calcium therapy and prognosis in critically ill SA-AKI patients, and assess the causal relationship through Mendelian randomization (MR) analysis.MethodsA single-center, retrospective, cross-sectional study included 90 SA-AKI patients and 30 septic patients without acute kidney injury (AKI) from the intensive care unit (ICU) of the First Hospital of Lanzhou University. SA-AKI patients were categorized into control or LMWH groups based on LMWH calcium usage. Primary outcome was renal function recovery, with secondary outcomes including 28-day mortality, ICU stay length, number of renal replacement therapy (RRT) recipients, and 90-day survival. MR and related sensitivity analyses explored causal effects.ResultsThe combination of heparin-binding protein (HBP), heparanase (HPA), and neutrophil gelatinase-associated lipocalin (NGAL) demonstrated high diagnostic value for SA-AKI. MR analysis suggested a potential causal link between gene-predicted HBP and AKI (OR: 1.369, 95%CI: 1.040–1.801, p = 0.024). In the retrospective study, LMWH-treated patients exhibited improved renal function, reduced levels of HPA, HBP, Syndecan-1, and inflammation, along with enhanced immune function compared to controls. However, LMWH did not impact 28-day mortality, 90-day survival, or ICU stay length.ConclusionLMWH could enhance renal function in SA-AKI patients. MR analysis supports this causal link, underscoring the need for further validation in randomized controlled trials

Berkovich Nanoindentation on AlN Thin Films

Berkovich nanoindentation-induced mechanical deformation mechanisms of AlN thin films have been investigated by using atomic force microscopy (AFM) and cross-sectional transmission electron microscopy (XTEM) techniques. AlN thin films are deposited on the metal-organic chemical-vapor deposition (MOCVD) derived Si-doped (2 × 1017 cm−3) GaN template by using the helicon sputtering system. The XTEM samples were prepared by means of focused ion beam (FIB) milling to accurately position the cross-section of the nanoindented area. The hardness and Young’s modulus of AlN thin films were measured by a Berkovich nanoindenter operated with the continuous contact stiffness measurements (CSM) option. The obtained values of the hardness and Young’s modulus are 22 and 332 GPa, respectively. The XTEM images taken in the vicinity regions just underneath the indenter tip revealed that the multiple “pop-ins” observed in the load–displacement curve during loading are due primarily to the activities of dislocation nucleation and propagation. The absence of discontinuities in the unloading segments of load–displacement curve suggests that no pressure-induced phase transition was involved. Results obtained in this study may also have technological implications for estimating possible mechanical damages induced by the fabrication processes of making the AlN-based devices