9,726 research outputs found
Coronal Seismology and the Propagation of Acoustic Waves Along Coronal Loops
We use a combination of analytical theory, numerical simulation, and data
analysis to study the propagation of acoustic waves along coronal loops. We
show that the intensity perturbation of a wave depends on a number of factors,
including dissipation of the wave energy, pressure and temperature gradients in
the loop atmosphere, work action between the wave and a flow, and the
sensitivity properties of the observing instrument. In particular, the scale
length of the intensity perturbation varies directly with the dissipation scale
length (i.e., damping length) and the scale lengths of pressure, temperature,
and velocity. We simulate wave propagation in three different equilibrium loop
models and find that dissipation and pressure and temperature stratification
are the most important effects in the low corona where the waves are most
easily detected. Velocity effects are small, and cross-sectional area
variations play no direct role for lines-of-sight that are normal to the loop
axis. The intensity perturbation scale lengths in our simulations agree very
well with the scale lengths we measure in a sample of loops observed by TRACE.
The median observed value is 4.35x10^9 cm. In some cases the intensity
perturbation increases with height, which is likely an indication of a
temperature inversion in the loop (i.e., temperature that decreases with
height). Our most important conclusion is that thermal conduction, the primary
damping mechanism, is accurately described by classical transport theory. There
is no need to invoke anomalous processes to explain the observations.Comment: To appear in the Dec. 1, 2004 issue of the Astrophysical Journa
Behavior of aircraft antiskid braking systems on dry and wet runway surfaces. A slip-velocity-controlled, pressure-bias-modulated system
The braking and cornering response of a slip velocity controlled, pressure bias modulated aircraft antiskid braking system is investigated. The investigation, conducted on dry and wet runway surfaces, utilized one main gear wheel, brake, and tire assembly of a McDonnell Douglas DC 9 series 10 airplane. The landing gear strut was replaced by a dynamometer. The parameters, which were varied, included the carriage speed, tire loading, yaw angle, tire tread condition, brake system operating pressure, and runway wetness conditions. The effects of each of these parameters on the behavior of the skid control system is presented. Comparisons between data obtained with the skid control system and data obtained from single cycle braking tests without antiskid protection are examined
Behavior of aircraft antiskid braking systems on dry and wet runway surfaces: Hydromechanically controlled system
The investigation utilized one main gear wheel, brake, and tire assembly of a McDonnell Douglas DC-9 series 10 airplane. The landing-gear strut was replaced by a dynamometer. During maximum braking, average braking behavior indexes based upon brake pressure, brake torque, and drag-force friction coefficient developed by the antiskid system were generally higher on dry surfaces than on wet surfaces. The three braking behavior indexes gave similar results but should not be used interchangeably as a measure of the braking of this antiskid sytem. During the transition from a dry to a flooded surface under heavy braking, the wheel entered into a deep skid but the antiskid system reacted quickly by reducing brake pressure and performed normally during the remainder of the run on the flooded surface. The brake-pressure recovery following transition from a flooded to a dry surface was shown to be a function of the antiskid modulating orifice
Transient dynamics and structure of optimal excitations in thermocapillary spreading: Precursor film model
Linearized modal stability theory has shown that the thermocapillary spreading of a liquid film on a homogeneous, completely wetting surface can produce a rivulet instability at the advancing front due to formation of a capillary ridge. Mechanisms that drain fluid from the ridge can stabilize the flow against rivulet formation. Numerical predictions from this analysis for the film speed, shape, and most unstable wavelength agree remarkably well with experimental measurements even though the linearized disturbance operator is non-normal, which allows transient growth of perturbations. Our previous studies using a more generalized nonmodal stability analysis for contact lines models describing partially wetting liquids (i.e., either boundary slip or van der Waals interactions) have shown that the transient amplification is not sufficient to affect the predictions of eigenvalue analysis. In this work we complete examination of the various contact line models by studying the influence of an infinite and flat precursor film, which is the most commonly employed contact line model for completely wetting films. The maximum amplification of arbitrary disturbances and the optimal initial excitations that elicit the maximum growth over a specified time, which quantify the sensitivity of the film to perturbations of different structure, are presented. While the modal results for the three different contact line models are essentially indistinguishable, the transient dynamics and maximum possible amplification differ, which suggests different transient dynamics for completely and partially wetting films. These differences are explained by the structure of the computed optimal excitations, which provides further basis for understanding the agreement between experiment and predictions of conventional modal analysis
Electronic and structural properties of alkali doped SWNT
Comprehensive experiments on structural and transport properties of alkali intercalated
single walled carbon nanotubes (SWNT) are presented. The increasing electron density was
measured as a shift of the Drude-edge in optical reflectivity in-situ with progressive doping. In
saturation-doped samples the Drude-edge shifts into the visible (to 25,000 - 30,000 cm— 1 for potassium
and rubidium doped samples) and the samples have a golden-brown color, similar to stage I
graphite. X-ray diffraction reveals a crystalline rope structure with expanded lattice constant, similar
to results of Duclaux et al. The change in the low temperature divergence of the resistivity after
degassing at high temperature and high vacuum and after K-doping is studied in-situ
Femtosecond frequency comb measurement of absolute frequencies and hyperfine coupling constants in cesium vapor
We report measurements of absolute transition frequencies and hyperfine
coupling constants for the 8S_{1/2}, 9S_{1/2}, 7D_{3/2}, and 7D_{5/2} states in
^{133}Cs vapor. The stepwise excitation through either the 6P_{1/2} or 6P_{3/2}
intermediate state is performed directly with broadband laser light from a
stabilized femtosecond laser optical-frequency comb. The laser beam is split,
counter-propagated and focused into a room-temperature Cs vapor cell. The
repetition rate of the frequency comb is scanned and we detect the fluorescence
on the 7P_{1/2,3/2} -> 6S_{1/2} branches of the decay of the excited states.
The excitations to the different states are isolated by the introduction of
narrow-bandwidth interference filters in the laser beam paths. Using a
nonlinear least-squares method we find measurements of transition frequencies
and hyperfine coupling constants that are in agreement with other recent
measurements for the 8S state and provide improvement by two orders of
magnitude over previously published results for the 9S and 7D states.Comment: 14 pages, 14 figure
Dynamics of aircraft antiskid braking systems
A computer study was performed to assess the accuracy of three brake pressure-torque mathematical models. The investigation utilized one main gear wheel, brake, and tire assembly of a McDonnell Douglas DC-9 series 10 airplane. The investigation indicates that the performance of aircraft antiskid braking systems is strongly influenced by tire characteristics, dynamic response of the antiskid control valve, and pressure-torque response of the brake. The computer study employed an average torque error criterion to assess the accuracy of the models. The results indicate that a variable nonlinear spring with hysteresis memory function models the pressure-torque response of the brake more accurately than currently used models
Ordered low-temperature structure in K4C60 detected by infrared spectroscopy
Infrared spectra of a K4C60 single-phase thin film have been measured between
room temperature and 20 K. At low temperatures, the two high-frequency T1u
modes appear as triplets, indicating a static D2h crystal-field stabilized
Jahn-Teller distortion of the (C60)4- anions. The T1u(4) mode changes into the
known doublet above 250 K, a pattern which could have three origins: a dynamic
Jahn-Teller effect, static disorder between "staggered" anions, or a phase
transition from an orientationally-ordered phase to one where molecular motion
is significant.Comment: 4 pages, 2 figures submitted to Phys. Rev.
Simulation of truncated normal variables
We provide in this paper simulation algorithms for one-sided and two-sided
truncated normal distributions. These algorithms are then used to simulate
multivariate normal variables with restricted parameter space for any
covariance structure.Comment: This 1992 paper appeared in 1995 in Statistics and Computing and the
gist of it is contained in Monte Carlo Statistical Methods (2004), but I
receive weekly requests for reprints so here it is
- …