Structural characterization of the Fddd phase in a diblock copolymer thin film by electron microtomography

A 3-dimensional Fddd network structure of a polystyrene-block-polyisoprene (PS-b-PI) diblock copolymer (M(n) = 31 500, f(PI) = 0.645) was observed for the first time in real space by transmission electron microtomography (TEMT). In a 650 nm thick film of the PS-b-PI thin film on a silicon wafer, the Fddd phase was developed after annealing at 215 degrees C for 24 h. The single network structure consists of the connected tripodal units of minor PS block domains. The {111}(Fddd) plane, the densest plane of the minor PS phase, was found to orient parallel to the film plane. The transitional structure from the wetting layer at the free surface to the internal {111}(Fddd) plane via a perforated layer structure was also observed.X111313sciescopu

Characterization of a 4-miktoarm star copolymer of the (PS-b-PI) 3 PS type by temperature gradient interaction chromatography

Abstract Temperature gradient interaction chromatography (TGIC) was applied for the separation of a complex miktoarm star copolymer which has one polystyrene (PS) arm and three polystyrene-b-polyisoprene (PS-b-PI) diblock copolymer arms. Such miktoarm star polymers are much more difficult to characterize than branched homopolymers since the byproduct, typically polymers with missing arm(s) or coupled products, have not only different molecular weights but also different compositions. TGIC was able to fully separate the byproducts, and the composition of the molecular species corresponding to the different separated elution peaks was determined by two methods, fractionation/NMR and multiple detection (UV and RI). A reasonable agreement between the results of the two methods was obtained. By using the composition found, the corresponding molecular weights were determined by multi-angle light scattering detection. Based on the composition and the molecular weight we were able to identify the structure of the different molecular species

Influence of the Solvent Quality on Ring Polymer Dimensions

We present a systematic investigation of well-characterized, experimentally pure polystyrene (PS) rings with molar mass of 161 000 g/mol in dilute solutions. We measure the ring form factor at θ - and good-solvent conditions as well as in a polymeric solvent (linear PS of roughly comparable molar mass) by means of small-angle neutron scattering (SANS). Additional dynamic light scattering (DLS) measurements support the SANS data and help elucidate the role of solvent quality and solution preparation. The results indicate the increase of ring dimensions as the solvent quality improves. Furthermore, the experimental form factors in both θ -solvent and linear matrix behave as ideal rings and are fully superimposable. The nearly Gaussian conformations of rings in a melt of linear chains provide evidence of threading of linear chains through rings. The latter result has implications for the dynamics of ring-linear polymer mixtures

A brief guide to polymer characterization: structure (IUPAC technical report)

To bolster the series of Brief Guides released by International Union of Pure and Applied Chemistry (IUPAC), here we introduce the first Brief Guide to Polymer Characterization. This article provides a concise overview of characterization methods for teachers, students, non-specialists, and newcomers to polymer science as well as being a useful manual for researchers and technicians. Unlike pure low molar mass chemical substances, polymers are not composed of identical molecules. The macromolecules which comprise a single polymer sample vary from one another, primarily in terms of size and shape, but often also in the arrangement or positioning of atoms within macromolecules (e.g., chain branching, isomerism, etc.). Polymer properties are often drastically different from those of other substances and their characterization relies on specialist equipment and/or common equipment used in a specialized way (e.g., particular sample preparation or data analysis). This Brief Guide focuses uniquely on the structural characterization (i.e., analyzing the molecular and multi-molecular aspects) of polymers. The complex nature of the structural variables possible in macromolecular materials often presents a challenge with regard to the detailed structural characterization of polymers. This Brief Guide provides a useful starting point to direct the reader to the most commonly used and useful techniques to characterize these structural variables

Purification and characterization of cyclic polymers

11Nsci

Relationship of Molecular Weight and Glass Transition Temperature of Tri-cyclic Polystyrene

2

HPLC Characterization of Complex Polymers

1

Separation and characterization of living and dead chains in polystyrene synthesized by ATRP

1

Influence of Chain Architecture and Functionality of Branched Polymers on Critical Adsorption Point of Liquid Chromatography

2