Small conductive particle sensor

An electrostatic conductive fiber detector is disclosed for use in detecting, counting and measuring the length of fibers down to 0.1 mm and below with increased accuracy and reliability over prior art devices. It can be used for detection of fibers suspending in a flowing gas, in a nonflowing gas, or in a vacuum and its accumulated counts over a period of time is essentially unaffected by velocity of the fibers being detected

Transfer functions

The vulnerability of electronic equipment to carbon fibers is studied. The effectiveness of interfaces, such as filters, doors, window screens, and cabinets, which affect the concentration, exposure, or deposition of carbon fibers on both (internal and external) sides of the interface is examined. The transfer function of multilayer aluminum mesh, wet and dry, polyurethane foam, and window screen are determined as a function of air velocity. FIlters installed in typical traffic control boxes and air conditioners are also considered

Vulnerability

The discussion of vulnerability begins with a description of some of the electrical characteristics of fibers before definiting how vulnerability calculations are done. The vulnerability results secured to date are presented. The discussion touches on post exposure vulnerability. After a description of some shock hazard work now underway, the discussion leads into a description of the planned effort and some preliminary conclusions are presented

Evaluation of Equipment Vulnerability and Potential Shock Hazards

The vulnerability of electric equipment to carbon fibers released from aircraft accidents is investigated and the parameters affecting vulnerability are discussed. The shock hazard for a hypothetical set of accidents is computed

Technology evaluation of man-rated acceleration test equipment for vestibular research

The considerations for eliminating acceleration noise cues in horizontal, linear, cyclic-motion sleds intended for both ground and shuttle-flight applications are addressed. the principal concerns are the acceleration transients associated with change in direction-of-motion for the carriage. The study presents a design limit for acceleration cues or transients based upon published measurements for thresholds of human perception to linear cyclic motion. The sources and levels for motion transients are presented based upon measurements obtained from existing sled systems. The approaches to a noise-free system recommends the use of air bearings for the carriage support and moving-coil linear induction motors operating at low frequency as the drive system. Metal belts running on air bearing pulleys provide an alternate approach to the driving system. The appendix presents a discussion of alternate testing techniques intended to provide preliminary type data by means of pendulums, linear motion devices and commercial air bearing tables

Circulation control propellers for general aviation, including a BASIC computer program

The feasibility of replacing variable pitch propeller mechanisms with circulation control (Coanada effect) propellers on general aviation airplanes was examined. The study used a specially developed computer program written in BASIC which could compare the aerodynamic performance of circulation control propellers with conventional propellers. The comparison of aerodynamic performance for circulation control, fixed pitch and variable pitch propellers is based upon the requirements for a 1600 kg (3600 lb) single engine general aviation aircraft. A circulation control propeller using a supercritical airfoil was shown feasible over a representative range of design conditions. At a design condition for high speed cruise, all three types of propellers showed approximately the same performance. At low speed, the performance of the circulation control propeller exceeded the performance for a fixed pitch propeller, but did not match the performance available from a variable pitch propeller. It appears feasible to consider circulation control propellers for single engine aircraft or multiengine aircraft which have their propellers on a common axis (tractor pusher). The economics of the replacement requires a study for each specific airplane application

Prevalent vertebral fractures among children initiating glucocorticoid therapy for the treatment of rheumatic disorders

Objective. Vertebral fractures are an under-recognized problem in children with inflammatory disorders. We studied spine health among 134 children (87 girls) with rheumatic conditions (median age 10 years) within 30 days of initiating glucocorticoid therapy. Methods. Children were categorized as follows: juvenile dermatomyositis (n = 30), juvenile idiopathic arthritis (n = 28), systemic lupus erythematosus and related conditions (n = 26), systemic arthritis (n = 22), systemic vasculitis (n = 16), and other conditions (n = 12). Thoracolumbar spine radiograph and dual x-ray absorptiometry for lumbar spine (L-spine) areal bone mineral density (BMD) were performed within 30 days of glucocorticoid initiation. Genant semiquantitative grading was used for vertebral morphometry. Second metacarpal morphometry was carried out on a hand radiograph. Clinical factors including disease and physical activity, calcium and vitamin D intake, cumulative glucocorticoid dose, underlying diagnosis, L-spine BMD Z score, and back pain were analyzed for association with vertebral fracture. Results. Thirteen vertebral fractures were noted in 9 children (7%). Of these, 6 patients had a single vertebral fracture and 3 had 2-3 fractures. Fractures were clustered in the mid-thoracic region (69%). Three vertebral fractures (23%) were moderate (grade 2); the others were mild (grade 1). For the entire cohort, mean ± SD L-spine BMD Z score was significantly different from zero (-0.55 ± 1.2, P \u3c 0.001) despite a mean height Z score that was similar to the healthy average (0.02 ± 1.0, P = 0.825). Back pain was highly associated with increased odds for fracture (odds ratio 10.6 [95% confidence interval 2.1-53.8], P = 0.004). Conclusion. In pediatric rheumatic conditions, vertebral fractures can be present prior to prolonged glucocorticoid exposure. © 2010, American College of Rheumatology

Impact of Sequencing Targeted Therapies With High-dose Interleukin-2 Immunotherapy: An Analysis of Outcome and Survival of Patients With Metastatic Renal Cell Carcinoma From an On-going Observational IL-2 Clinical Trial: PROCLAIM

BACKGROUND: This analysis describes the outcome for patients who received targeted therapy (TT) prior to or following high-dose interleukin-2 (HD IL-2). PATIENTS AND METHODS: Patients with renal cell carcinoma (n = 352) receiving HD IL-2 were enrolled in Proleukin RESULTS: Overall, there were 4% complete response (CR), 13% partial response (PR), 39% stable disease (SD), and 43% progressive disease (PD) with HD IL-2. The median overall survival (mOS) was not reached in patients with CR, PR, or SD, and was 15.5 months in patients with PD (median follow-up, 21 months). Sixty-one patients had prior TT before HD IL-2 with an overall response rate (ORR) to HD IL-2 of 19% (1 CR, 9 PR) and an mOS of 22.1 months. One hundred forty-nine patients received TT only after HD IL-2 with an mOS of 35.5 months. One hundred forty-two patients had no TT before or after HD IL-2, and mOS was not reached. The mOS was 8.5 months in PD patients who received HD IL-2 without follow-on TT and 29.7 months in PD patients who received follow-on TT after HD IL-2. CONCLUSIONS: HD IL-2 as sole front-line therapy, in the absence of added TT, shows extended clinical benefit (CR, PR, and SD). Patients with PD after HD IL-2 appear to benefit from follow-on TT. Patients who progressed on TT and received follow-on HD IL-2 experienced major clinical benefit. HD IL-2 therapy should be considered in eligible patients