74,187 research outputs found

    Comparative performance of squeeze film air journal bearings made of aluminium and copper

    Get PDF
    This article is distributed under the terms of the Creative Commons Attribution License which permits any use, distribution, and reproduction in any medium, provided the original author(s) and the source are credited. Copyright @ 2012 The Authors - The article can be accessed from the links below.This article has been made available through the Brunel Open Access Publishing Fund.Two tubular squeeze film journal bearings, made from Al 2024 T3 and Cu C101, were excited by driving the single-layer piezoelectric actuators at a 75-V AC with a 75-V DC offset. The input excitation frequencies were coincident with the 13th modal frequency, at 16.32 and 12.18 kHz for the respective Al and Cu bearings, in order to produce a ‘triangular’ modal shape. The paper also provided a CFX model, used to solve the Reynolds equation and the equation of motion, to explain the squeeze film effect of an oscillating plate with pressure end leakage. The dynamic characteristics of both bearings were studied in ANSYS and then validated by experiments with respect to their squeeze film thickness and load-carrying capacity. It was observed that whilst both bearings did levitate a load when excited at mode 13, the Al bearing showed a better floating performance than Cu bearing. This is due to the fact that the Al bearing had a higher modal frequency and a greater amplitude response than the Cu bearing.This article is made available through the Brunel Open Access Publishing Fund

    Second harmonic generation confocal microscopy of collagen type I from rat tendon cryosections

    Get PDF
    We performed second harmonic generation (SHG) imaging of collagen in rat-tendon cryosections, using femtosecond laser scanning confocal microscopy, both in backscattering and transmission geometries. SHG transmission images of collagen fibers were spatially resolved due to a coherent, directional SHG component. This effect was enhanced with the use of an index-matching fluid (n(l) 1.52). The average SHG intensity oscillated with wavelength in the backscattered geometry (isotropic SHG component), whereas the spectral profile was consistent with quasi-phase-matching conditions in transmission geometry (forward propagating, coherent SHG component) around 440 nm (lambda(p) 880 nm). Collagen type I from bovine Achilles tendon was imaged for SHG in the backscattered geometry and its first-order effective nonlinear coefficient was determined (vertical bar d(eff)vertical bar approximate to 0.085(+/- 0.025) x 10-(12)mV(-1)) by comparison to samples of inorganic materials with known effective nonlinear coefficients (LiNbO3 and LiIO3). The SHG spectral response of collagen type I from bovine Achilles tendon matched that of the rat-tendon cryosections in backscattered geometry. Collagen types I, II, and VI powders (nonfibrous) did not show any detectable SHG, indicating a lack of noncentrosymmetric crystalline structure at the molecular level. The various stages of collagen thermal denaturation were investigated in rat-tendon cryosections using SHG and bright-field imaging. Thermal denaturation resulted in the gradual destruction of the SHG signal

    Impact of schizophrenia on anterior and posterior hippocampus during memory for complex scenes.

    Get PDF
    ObjectivesHippocampal dysfunction has been proposed as a mechanism for memory deficits in schizophrenia. Available evidence suggests that the anterior and posterior hippocampus could be differentially affected. Accordingly, we used fMRI to test the hypothesis that activity in posterior hippocampus is disproportionately reduced in schizophrenia, particularly during spatial memory retrieval.Methods26 healthy participants and 24 patients with schizophrenia from the UC Davis Early Psychosis Program were studied while fMRI was acquired on a 3 Tesla Siemens scanner. During encoding, participants were oriented to critical items through questions about item features (e.g., "Does the lamp have a square shade?") or spatial location (e.g., "Is the lamp on the table next to the couch?"). At test, participants determined whether scenes were changed or unchanged. fMRI analyses contrasted activation in a priori regions of interest (ROI) in anterior and posterior hippocampus during correct recognition of item changes and spatial changes.ResultsAs predicted, patients with schizophrenia exhibited reduced activation in the posterior hippocampus during detection of spatial changes but not during detection of item changes. Unexpectedly, patients exhibited increased activation of anterior hippocampus during detection of item changes. Whole brain analyses revealed reduced fronto-parietal and striatal activation in patients for spatial but not for item change trials.ConclusionsResults suggest a gradient of hippocampal dysfunction in which posterior hippocampus - which is necessary for processing fine-grained spatial relationships - is underactive, and anterior hippocampus - which may process context more globally - is overactive

    Mapping Functions in Health-Related Quality of Life: Mapping From Two Cancer-Specific Health-Related Quality-of-Life Instruments to EQ-5D-3L.

    Get PDF
    BACKGROUND: Clinical trials in cancer frequently include cancer-specific measures of health but not preference-based measures such as the EQ-5D that are suitable for economic evaluation. Mapping functions have been developed to predict EQ-5D values from these measures, but there is considerable uncertainty about the most appropriate model to use, and many existing models are poor at predicting EQ-5D values. This study aims to investigate a range of potential models to develop mapping functions from 2 widely used cancer-specific measures (FACT-G and EORTC-QLQ-C30) and to identify the best model. METHODS: Mapping models are fitted to predict EQ-5D-3L values using ordinary least squares (OLS), tobit, 2-part models, splining, and to EQ-5D item-level responses using response mapping from the FACT-G and QLQ-C30. A variety of model specifications are estimated. Model performance and predictive ability are compared. Analysis is based on 530 patients with various cancers for the FACT-G and 771 patients with multiple myeloma, breast cancer, and lung cancer for the QLQ-C30. RESULTS: For FACT-G, OLS models most accurately predict mean EQ-5D values with the best predicting model using FACT-G items with similar results using tobit. Response mapping has low predictive ability. In contrast, for the QLQ-C30, response mapping has the most accurate predictions using QLQ-C30 dimensions. The QLQ-C30 has better predicted EQ-5D values across the range of possible values; however, few respondents in the FACT-G data set have low EQ-5D values, which reduces the accuracy at the severe end. CONCLUSIONS: OLS and tobit mapping functions perform well for both instruments. Response mapping gives the best model predictions for QLQ-C30. The generalizability of the FACT-G mapping function is limited to populations in moderate to good health

    Formation of color-singlet gluon-clusters and inelastic diffractive scattering

    Get PDF
    This is the extensive follow-up report of a recent Letter in which the existence of self-organized criticality (SOC) in systems of interacting soft gluons is proposed, and its consequences for inelastic diffractive scattering processes are discussed. It is pointed out, that color-singlet gluon-clusters can be formed in hadrons as a consequence of SOC in systems of interacting soft gluons, and that the properties of such spatiotemporal complexities can be probed experimentally by examing inelastic diffractive scattering. Theoretical arguments and experimental evidences supporting the proposed picture are presented --- together with the result of a systematic analysis of the existing data for inelastic diffractive scattering processes performed at different incident energies, and/or by using different beam-particles. It is shown in particular that the size- and the lifetime-distributions of such gluon-clusters can be directly extracted from the data, and the obtained results exhibit universal power-law behaviors --- in accordance with the expected SOC-fingerprints. As further consequences of SOC in systems of interacting soft gluons, the tt-dependence and the (Mx2/s)(M_x^2/s)-dependence of the double differential cross-sections for inelastic diffractive scattering off proton-target are discussed. Here tt stands for the four-momentum-transfer squared, MxM_x for the missing mass, and s\sqrt{s} for the total c.m.s. energy. It is shown, that the space-time properties of the color-singlet gluon-clusters due to SOC, discussed above, lead to simple analytical formulae for d2σ/dtd(Mx2/s)d^2\sigma/dt d(M_x^2/s) and for dσ/dtd\sigma/dt, and that the obtained results are in good agreement with the existing data. Further experiments are suggested.Comment: 67 pages, including 11 figure

    3D printing of gas jet nozzles for laser-plasma accelerators

    Full text link
    Recent results on laser wakefield acceleration in tailored plasma channels have underlined the importance of controlling the density profile of the gas target. In particular it was reported that appropriate density tailoring can result in improved injection, acceleration and collimation of laser-accelerated electron beams. To achieve such profiles innovative target designs are required. For this purpose we have reviewed the usage of additive layer manufacturing, commonly known as 3D printing, in order to produce gas jet nozzles. Notably we have compared the performance of two industry standard techniques, namely selective laser sintering (SLS) and stereolithography (SLA). Furthermore we have used the common fused deposition modeling (FDM) to reproduce basic gas jet designs and used SLA and SLS for more sophisticated nozzle designs. The nozzles are characterized interferometrically and used for electron acceleration experiments with the Salle Jaune terawatt laser at Laboratoire d'Optique Appliqu\'ee
    corecore