PMOS Operational Amplifier

This project was an evaluation of a PMOS op amp characteristics. Due to nonworking op amps, SPICE simulation and design layout were investigated. Results show that new design and fabrication are needed

Influence of alloying elements on the corrosion of fine art bronze in the strong corrosive environment

The influence of Sn, Zn, and Pb on the corrosion of fine art bronze in strong corrosive environment were investigated. The value of loss mass and the potential of the specimens were determined in the artificial sea-water environment. Corrosion of specimens was compared each to other to find the effect of the elements. The corrosion products were determined with the XRD/SEM/EDS analyses. The results shown that, Sn decreases the corrosion rate of the bronze alloy in marine environment while Zn increases it. The corrosion rates and potential curves showed that the corrosion rate of the bronzes reduced with immersion time. Alloy containing 0.7% Pb; 1.6% Zn; 9.7 % Sn; 88% Cu (in %wt.) has the corrosion rate as lowest. Keywords. Corrosion, strong corrosive environments, fine art bronze, Sn, Pb, Zn

A novel IGHMBP2 variant and clinical diversity in Vietnamese SMARD1 and CMT2S patients

BackgroundPathogenic variants in the IGHMBP2 gene are associated with two distinct autosomal recessive neuromuscular disorders: spinal muscular atrophy with respiratory distress type 1 (SMARD1; OMIM #604320) and Charcot–Marie–Tooth type 2S (CMT2S; OMIM #616155). SMARD1 is a severe and fatal condition characterized by infantile-onset respiratory distress, diaphragmatic palsy, and distal muscular weakness, while CMT2S follows a milder clinical course, with slowly progressive distal muscle weakness and sensory loss, without manifestations of respiratory disorder.MethodsWhole-exome sequencing of the IGHMBP2 gene was performed for eight Vietnamese patients with IGHMBP2-related neuromuscular disorders including five patients with SMARD1 and the others with CMT2S.ResultsWe identified one novel IGHMBP2 variant c.1574T > C (p.Leu525Pro) in a SMARD1 patient. Besides that, two patients shared the same pathogenic variants (c.1235 + 3A > G/c.1334A > C) but presented completely different clinical courses: one with SMARD1 who deceased at 8 months of age, the other with CMT2S was alive at 3 years old without any respiratory distress.ConclusionThis study is the first to report IGHMBP-2-related neuromuscular disorders in Vietnam. A novel IGHMBP2 variant c.1574T > C (p.Leu525Pro) expressing SMARD1 phenotype was detected. The presence of three patients with the same genotype but distinct clinical outcomes suggested the interaction of variants and other factors including relating modified genes in the mechanism of various phenotypes

Optimization of Oligomer Chitosan/Polyvinylpyrrolidone Coating for Enhancing Antibacterial, Hemostatic Effects and Biocompatibility of Nanofibrous Wound Dressing

A synergistic multilayer membrane design is necessary to satisfy a multitude of requirements of an ideal wound dressing. In this study, trilayer dressings with asymmetric wettability, composed of electrospun polycaprolactone (PCL) base membranes coated with oligomer chitosan (COS) in various concentrations of polyvinylpyrrolidone (PVP), are fabricated for wound dressing application. The membranes are expected to synergize the hygroscopic, antibacterial, hemostatic, and biocompatible properties of PCL and COS. The wound dressing was coated by spraying the solution of 3% COS and 6% PVP on the PCL base membrane (PVP6–3) three times, which shows good interaction with biological subjects, including bacterial strains and blood components. PVP6–3 samples confirm the diameter of inhibition zones of 20.0 ± 2.5 and 17.9 ± 2.5 mm against Pseudomonas aeruginosa and Staphylococcus aureus, respectively. The membrane induces hemostasis with a blood clotting index of 74% after 5 min of contact. In the mice model, wounds treated with PVP6–3 closed 95% of the area after 10 days. Histological study determines the progression of skin regeneration with the construction of granulation tissue, new vascular systems, and hair follicles. Furthermore, the newly-growth skin shares structural resemblances to that of native tissue. This study suggests a simple approach to a multi-purpose wound dressing for clinical treatment

Table1_A novel IGHMBP2 variant and clinical diversity in Vietnamese SMARD1 and CMT2S patients.docx

BackgroundPathogenic variants in the IGHMBP2 gene are associated with two distinct autosomal recessive neuromuscular disorders: spinal muscular atrophy with respiratory distress type 1 (SMARD1; OMIM #604320) and Charcot–Marie–Tooth type 2S (CMT2S; OMIM #616155). SMARD1 is a severe and fatal condition characterized by infantile-onset respiratory distress, diaphragmatic palsy, and distal muscular weakness, while CMT2S follows a milder clinical course, with slowly progressive distal muscle weakness and sensory loss, without manifestations of respiratory disorder.MethodsWhole-exome sequencing of the IGHMBP2 gene was performed for eight Vietnamese patients with IGHMBP2-related neuromuscular disorders including five patients with SMARD1 and the others with CMT2S.ResultsWe identified one novel IGHMBP2 variant c.1574T > C (p.Leu525Pro) in a SMARD1 patient. Besides that, two patients shared the same pathogenic variants (c.1235 + 3A > G/c.1334A > C) but presented completely different clinical courses: one with SMARD1 who deceased at 8 months of age, the other with CMT2S was alive at 3 years old without any respiratory distress.ConclusionThis study is the first to report IGHMBP-2-related neuromuscular disorders in Vietnam. A novel IGHMBP2 variant c.1574T > C (p.Leu525Pro) expressing SMARD1 phenotype was detected. The presence of three patients with the same genotype but distinct clinical outcomes suggested the interaction of variants and other factors including relating modified genes in the mechanism of various phenotypes.</p

Platelet rich fibrin and MTA in the treatment of teeth with open apices

Abstract Background The present study aimed to evaluate the effectiveness of using platelet-rich fibrin (PRF) as the apical matrix for the placement of MTA in nonsurgical endodontic therapy for teeth with periapical lesions and open apices. Methods Twelve teeth from eleven patients with periapical periodontitis and open apices were enrolled in the study. Nonsurgical endodontic therapy was performed with the PRF used as an apical barrier and the MTA manipulated as an apical plug for further thermoplasticized gutta percha in the remaining part of the root canal. Clinical signs and periapical digital radiographs were recorded and analyzed to evaluate the curing progress after periodical follow-ups of 1, 3, and 6 months. The horizontal dimension of the periapical lesion was determined, and the changes in the dimensions were recorded each time. The Friedman test was used for statistical analysis, with P < .05 serving as the threshold for determining statistical significance. Results All patients had no clinical symptoms after the first month of treatment, with a significant reduction in the periapical lesion after periodical appointments. Conclusions PRF is an effective barrier when combined with MTA for the treatment of teeth with periapical periodontitis and open apices

Prevalence and correlates of hyperglycemia in a rural population, Vietnam: implications from a cross–sectional study

<p>Abstract</p> <p>Background</p> <p>Despite the increasing prevalence of type 2 diabetes in urban areas, relatively little has been known about its actual prevalence and its associations in rural areas, Vietnam. The purpose of this study was to evaluate the prevalence of impaired fasting glucose (IFG), impaired glucose tolerance (IGT), diabetes and their risk factors in a rural province, Vietnam.</p> <p>Methods</p> <p>A cross–sectional study with a representative sample was designed to estimate the hyperglycemia prevalence, using 75–g oral glucose tolerance test. Potential risk factors for hyperglycemia were analyzed using multinomial logistic regression, taken into account influences of socio–economic status, anthropometric measures, and lifestyle–related factors.</p> <p>Results</p> <p>The age and sex–adjusted prevalence rates (95% CI) of isolated IFG, isolated IGT, combined IFG–IGT, and diabetes were 8.7 (7.0–10.5), 4.3 (3.2−5.4), 1.6 (0.9−2.3), and 3.7% (2.7–4.7%), respectively. There were still 73% of diabetic subjects without knowing the condition. Blood pressure, family history of diabetes, obesity–related measures (waist circumference, waist–hip ratio, body fat percentage, and abdominal obesity) were the independent risk factors for hyperglycemia (IFG, IGT, and diabetes).</p> <p>Conclusions</p> <p>The prevalence of hyperglycemia in rural areas has not been as sharply increased as that reported in urban cities, Vietnam. Blood pressure and obesity–related measures were the most significant predictors for hyperglycemia level and they can be taken into account in building prognosis models to early detection of diabetes in rural Vietnamese populations.</p

Journal. Rno Microelectronic Engineering 1987

The papers which follow summarize the results of researchperformed by the graduating seniors from the MicroelectronicEngineering Program at the Rochester Institute of Technology (RIT).In their final quarter (ten weeks) of study, the students submit aproposal for a research topic covering the relevance of theirproject to both the Microelectronics field and the Engineeringprogram at RIT, as well as a tentative timetable and budget. Aftera faculty critique, the project is either accepted as proposed orrevised. Thereafter, the student executes the researchindependently over the course of the quarter. The students meetweekly with the course coordinator to monitor progress, obtainsupplies, and revise the experiment as results develop. In additionto the research, their results are presented orally at the AnnualMicroelectronic Engineering Conference and in written form in thisjournal . The student is free (and encouraged) to seek the guidanceof other faculty members, both in and outside the MicroelectronicEngineering Faculty, researchers at other institutes, or industrialcolleagues.https://scholarworks.rit.edu/meec_archive/1001/thumbnail.jp