Review of the Common Deposition Methods of Thin-Film Pentacene, Its Derivatives, and Their Performance

Pentacene is a well-known conjugated organic molecule with high mobility and a sensitive photo response. It is widely used in electronic devices, such as in organic thin-film transistors (OTFTs), organic light-emitting diodes (OLEDs), photodetectors, and smart sensors. With the development of flexible and wearable electronics, the deposition of good-quality pentacene films in large-scale organic electronics at the industrial level has drawn more research attention. Several methods are used to deposit pentacene thin films. The thermal evaporation technique is the most frequently used method for depositing thin films, as it has low contamination rates and a well-controlled deposition rate. Solution-processable methods such as spin coating, dip coating, and inkjet printing have also been widely studied because they enable large-scale deposition and low-cost fabrication of devices. This review summarizes the deposition principles and control parameters of each deposition method for pentacene and its derivatives. Each method is discussed in terms of experimentation and theory. Based on film quality and device performance, the review also provides a comparison of each method to provide recommendations for specific device applications

Basal paravian functional anatomy illuminated by high-detail body outline

Body shape is a fundamental expression of organismal biology, but its quantitative reconstruction in fossil vertebrates is rare. Due to the absence of fossilized soft tissue evidence, the functional consequences of basal paravian body shape and its implications for the origins of avians and flight are not yet fully understood. Here we reconstruct the quantitative body outline of a fossil paravian Anchiornis based on high-definition images of soft tissues revealed by laser-stimulated fluorescence. This body outline confirms patagia-bearing arms, drumstick-shaped legs and a slender tail, features that were probably widespread among paravians. Finely preserved details also reveal similarities in propatagial and footpad form between basal paravians and modern birds, extending their record to the Late Jurassic. The body outline and soft tissue details suggest significant functional decoupling between the legs and tail in at least some basal paravians. The number of seemingly modern propatagial traits hint that feathering was a significant factor in how basal paravians utilized arm, leg and tail function for aerodynamic benefit.published_or_final_versio

Nano-FTIR Spectroscopy of Intersubband Polaritons in Single Nanoantenna

We demonstrate observation of infrared (IR) intersubband (ISB) polaritons in an isolated subwavelength size nanoantenna using near-field Fourier-transform infrared (FTIR) spectroscopy of the evanescent fields on the nanoantenna surface. The near-field approach enables detection of the distinctive polariton splitting of the nanoantenna resonance in the amplitude and phase spectra, as well as mapping of the ISB polariton dispersion. The nano-FTIR spectroscopy approach opens doors for investigations of light-matter interaction in the single subwavelength nanoantenna regime

Expert recommendation via tensor factorization with regularizing hierarchical topical relationships

© Springer Nature Switzerland AG 2018. Knowledge acquisition and exchange are generally crucial yet costly for both businesses and individuals, especially when the knowledge concerns various areas. Question Answering Communities offer an opportunity for sharing knowledge at a low cost, where communities users, many of whom are domain experts, can potentially provide high-quality solutions to a given problem. In this paper, we propose a framework for finding experts across multiple collaborative networks. We employ the recent techniques of tree-guided learning (via tensor decomposition), and matrix factorization to explore user expertise from past voted posts. Tensor decomposition enables to leverage the latent expertise of users, and the posts and related tags help identify the related areas. The final result is an expertise score for every user on every knowledge area. We experiment on Stack Exchange Networks, a set of question answering websites on different topics with a huge group of users and posts. Experiments show our proposed approach produces steady and premium outputs

Laser-Stimulated Fluorescence in Paleontology

Fluorescence using ultraviolet (UV) light has seen increased use as a tool in paleontology over the last decade. Laser-stimulated fluorescence (LSF) is a next generation technique that is emerging as a way to fluoresce paleontological specimens that remain dark under typical UV. A laser’s ability to concentrate very high flux rates both at the macroscopic and microscopic levels results in specimens fluorescing in ways a standard UV bulb cannot induce. Presented here are five paleontological case histories that illustrate the technique across a broad range of specimens and scales. Novel uses such as back-lighting opaque specimens to reveal detail and detection of specimens completely obscured by matrix are highlighted in these examples. The recent cost reductions in medium-power short wavelength lasers and use of standard photographic filters has now made this technique widely accessible to researchers. This technology has the potential to automate multiple aspects of paleontology, including preparation and sorting of microfossils. This represents a highly cost-effective way to address paleontology's preparatory bottleneck.published_or_final_versio

Predicting microscale bubble to slug transition boundary using an Artificial Neural Network

Microchannel heat sinks have potential applications in, for example, miniature refrigeration systems, the cooling of computer chips and power electronics and the cooling of fuel cells1. Implementing flow boiling in microchannel heat sinks promises to provide significantly greater heat transfer rates than single-phase flows due to the utilisation of latent heat. However, general predictive tools for heat transfer rates and pressure drops in microchannels must be derived and agreed to facilitate extensive adoption by industry. Microscale heat transfer rates and pressure drops are fundamentally dependent upon the prevailing flow patterns, which describe the geometry of the liquid-vapour interface.Engineering and Physical Sciences Research Council, UK, through the grant Boiling Flows in Small and Microchannels (BONSAI): From Fundamentals to Design (EP/T03338X/1, EP/T033045/1)

A CMOS-based characterisation platform for emerging RRAM technologies

Mass characterisation of emerging memory devices is an essential step in modelling their behaviour for integration within a standard design flow for existing integrated circuit designers. This work develops a novel characterisation platform for emerging resistive devices with a capacity of up to 1 million devices on-chip. Split into four independent sub-arrays, it contains on-chip column-parallel DACs for fast voltage programming of the DUT. On-chip readout circuits with ADCs are also available for fast read operations covering 5-decades of input current (20nA to 2mA). This allows a device’s resistance range to be between 1kΩ and 10MΩ with a minimum voltage range of ±1.5V on the device

Foot Bone in Vivo: Its Center of Mass and Centroid of Shape

This paper studies foot bone geometrical shape and its mass distribution and establishes an assessment method of bone strength. Using spiral CT scanning, with an accuracy of sub-millimeter, we analyze the data of 384 pieces of foot bones in vivo and investigate the relationship between the bone's external shape and internal structure. This analysis is explored on the bases of the bone's center of mass and its centroid of shape. We observe the phenomenon of superposition of center of mass and centroid of shape fairly precisely, indicating a possible appearance of biomechanical organism. We investigate two aspects of the geometrical shape, (i) distance between compact bone's centroid of shape and that of the bone and (ii) the mean radius of the same density bone issue relative to the bone's centroid of shape. These quantities are used to interpret the influence of different physical exercises imposed on bone strength, thereby contributing to an alternate assessment technique to bone strength.Comment: 9 pages, 4 figure

MIR376A is a regulator of starvation-induced autophagy

Background: Autophagy is a vesicular trafficking process responsible for the degradation of long-lived, misfolded or abnormal proteins, as well as damaged or surplus organelles. Abnormalities of the autophagic activity may result in the accumulation of protein aggregates, organelle dysfunction, and autophagy disorders were associated with various diseases. Hence, mechanisms of autophagy regulation are under exploration. Methods: Over-expression of hsa-miR-376a1 (shortly MIR376A) was performed to evaluate its effects on autophagy. Autophagy-related targets of the miRNA were predicted using Microcosm Targets and MIRanda bioinformatics tools and experimentally validated. Endogenous miRNA was blocked using antagomirs and the effects on target expression and autophagy were analyzed. Luciferase tests were performed to confirm that 3’ UTR sequences in target genes were functional. Differential expression of MIR376A and the related MIR376B was compared using TaqMan quantitative PCR. Results: Here, we demonstrated that, a microRNA (miRNA) from the DlkI/Gtl2 gene cluster, MIR376A, played an important role in autophagy regulation. We showed that, amino acid and serum starvation-induced autophagy was blocked by MIR376A overexpression in MCF-7 and Huh-7 cells. MIR376A shared the same seed sequence and had overlapping targets with MIR376B, and similarly blocked the expression of key autophagy proteins ATG4C and BECN1 (Beclin 1). Indeed, 3’ UTR sequences in the mRNA of these autophagy proteins were responsive to MIR376A in luciferase assays. Antagomir tests showed that, endogenous MIR376A was participating to the control of ATG4C and BECN1 transcript and protein levels. Moreover, blockage of endogenous MIR376A accelerated starvation-induced autophagic activity. Interestingly, MIR376A and MIR376B levels were increased with different kinetics in response to starvation stress and tissue-specific level differences were also observed, pointing out to an overlapping but miRNA-specific biological role. Conclusions: Our findings underline the importance of miRNAs encoded by the DlkI/Gtl2 gene cluster in stress-response control mechanisms, and introduce MIR376A as a new regulator of autophagy