4,863 research outputs found
Orbital and Spin Parameter Variations of Partial Eclipsing Low Mass X-ray Binary X 1822-371
We report our measurements for orbital and spin parameters of X 1822-371 using its X-ray partial eclipsing profile and pulsar timing from data collected by the Rossi X-ray Timing Explorer (RXTE). Four more X-ray eclipse times obtained by the RXTE 2011 observations were combined with historical records to trace evolution of orbital period. We found that a cubic ephemeris likely better describes evolution of the X-ray eclipse times during a time span of about 34 years with a marginal second order derivative of s. Using the pulse arrival time delay technique, the orbital and spin parameters were obtained from RXTE observations from 1998 to 2011. The detected pulse periods show that the neutron star in X 1822-371 is continuously spun-up with a rate of s s. Evolution of the epoch of the mean longitude (i.e. ) gives an orbital period derivative value consistent with that obtained from the quadratic ephemeris evaluated by the X-ray eclipse but the detected values are significantly and systematically earlier than the corresponding expected X-ray eclipse times by s. This deviation is probably caused by asymmetric X-ray emissions. We also attempted to constrain the mass and radius of the neutron star using the spin period change rate and concluded that the intrinsic luminosity of X 1822-371 is likely more than ergs s.postprin
Seroprevalence of Human Immunodeficiency Virus, Hepatitis B, Hepatitis C, syphilis, and co infections among antenatal women in a tertiary institution in south east, Nigeria
Background: Sexually transmitted infections and human immunodeficiency virus (HIV)/AIDS are a major public health concern owing to both their prevalence and propensity to affect offspring through vertical transmission. Aim: The aim was to determine the seroprevalence of HIV, hepatitis B virus (HBV), hepatitis C virus (HCV), syphilis, and co‑infections among antenatal women in Enugu, South‑East Nigeria. Materials and Methods: A retrospective study of antenatal women at the University of Nigeria Teaching Hospital, Enugu, South‑East Nigeria from 1st May 2006 to 30th April 2008. A pretested data extraction form was used to obtain data on sociodemographic variables and screening test results from the antenatal records. The analysis was done with SPSS version 17 (Chicago, IL, USA). Results: A total of 1239 antenatal records was used for the study. The seroprevalence of HIV, HBV, HCV, and syphilis among the antenatal women were 12.4% (154/1239), 3.4% (42/1239) 2.6 (32/1239) 0.08% (1/1239), respectively. The HIV/HBV and HIV/HCV co‑infection prevalence rates were 0.24% (3/1239), 0.16% (2/1239), respectively. There was no HBC and HCV co‑infection among both HIV positive and negative antenatal women. There was no statistically significant difference in HBV and HCV infection between the HIV positive and negative antenatal women. The only woman that was seropositive for syphilis was also positive to HIV. Conclusion: The seroprevalence of HIV, HBV, HCV, and syphilis is still a challenge in Enugu. Community health education is necessary to reduce the prevalence of this infection among the most productive and economically viable age bracket.Keywords: Antenatal women, Co‑infection, Human immunodeficiency virus, Hepatitis C virus, Hepatitis B virus, Seroprevalence, Syphili
On fractionality of the path packing problem
In this paper, we study fractional multiflows in undirected graphs. A
fractional multiflow in a graph G with a node subset T, called terminals, is a
collection of weighted paths with ends in T such that the total weights of
paths traversing each edge does not exceed 1. Well-known fractional path
packing problem consists of maximizing the total weight of paths with ends in a
subset S of TxT over all fractional multiflows. Together, G,T and S form a
network. A network is an Eulerian network if all nodes in N\T have even
degrees.
A term "fractionality" was defined for the fractional path packing problem by
A. Karzanov as the smallest natural number D so that there exists a solution to
the problem that becomes integer-valued when multiplied by D. A. Karzanov has
defined the class of Eulerian networks in terms of T and S, outside which D is
infinite and proved that whithin this class D can be 1,2 or 4. He conjectured
that D should be 1 or 2 for this class of networks. In this paper we prove this
conjecture.Comment: 18 pages, 5 figures in .eps format, 2 latex files, main file is
kc13.tex Resubmission due to incorrectly specified CS type of the article; no
changes to the context have been mad
Hexagonal Boron Nitride-Enhanced Optically Transparent Polymer Dielectric Inks for Printable Electronics.
Solution-processable thin-film dielectrics represent an important material family for large-area, fully-printed electronics. Yet, in recent years, it has seen only limited development, and has mostly remained confined to pure polymers. Although it is possible to achieve excellent printability, these polymers have low (≈2-5) dielectric constants (ε r ). There have been recent attempts to use solution-processed 2D hexagonal boron nitride (h-BN) as an alternative. However, the deposited h-BN flakes create porous thin-films, compromising their mechanical integrity, substrate adhesion, and susceptibility to moisture. These challenges are addressed by developing a "one-pot" formulation of polyurethane (PU)-based inks with h-BN nano-fillers. The approach enables coating of pinhole-free, flexible PU+h-BN dielectric thin-films. The h-BN dispersion concentration is optimized with respect to exfoliation yield, optical transparency, and thin-film uniformity. A maximum ε r ≈ 7.57 is achieved, a two-fold increase over pure PU, with only 0.7 vol% h-BN in the dielectric thin-film. A high optical transparency of ≈78.0% (≈0.65% variation) is measured across a 25 cm2 area for a 10 μm thick dielectric. The dielectric property of the composite is also consistent, with a measured areal capacitance variation of <8% across 64 printed capacitors. The formulation represents an optically transparent, flexible thin-film, with enhanced dielectric constant for printed electronics.EPSRC funding acknowledged (EP/L016087/1
Recommended from our members
102 fs pulse generation from a long-term stable, inkjet-printed black phosphorus-mode-locked fiber laser.
We demonstrate a long-term stable, all-fiber, erbium-doped femtosecond laser mode-locked by a black phosphorus saturable absorber. The saturable absorber, fabricated by scalable and highly controllable inkjet printing technology, exhibits strong nonlinear optical response and is stable for long-term operation against intense irradiation, overcoming a key drawback of this material. The oscillator delivers self-starting, 102 fs stable pulses centered at 1555 nm with 40 nm spectral bandwidth. This represents the shortest pulse duration achieved from black phosphorus in a fiber laser to date. Our results demonstrate the great potential for black phosphorus as an excellent candidate for long-term stable ultrashort pulse generation
Identification and functional characterisation of CRK12:CYC9, a novel cyclin-dependent kinase (CDK)-cyclin complex in Trypanosoma brucei
The protozoan parasite, Trypanosoma brucei, is spread by the tsetse fly and causes trypanosomiasis in humans and animals. Both the life cycle and cell cycle of the parasite are complex. Trypanosomes have eleven cdc2-related kinases (CRKs) and ten cyclins, an unusually large number for a single celled organism. To date, relatively little is known about the function of many of the CRKs and cyclins, and only CRK3 has previously been shown to be cyclin-dependent in vivo. Here we report the identification of a previously uncharacterised CRK:cyclin complex between CRK12 and the putative transcriptional cyclin, CYC9. CRK12:CYC9 interact to form an active protein kinase complex in procyclic and bloodstream T. brucei. Both CRK12 and CYC9 are essential for the proliferation of bloodstream trypanosomes in vitro, and we show that CRK12 is also essential for survival of T. brucei in a mouse model, providing genetic validation of CRK12:CYC9 as a novel drug target for trypanosomiasis. Further, functional characterisation of CRK12 and CYC9 using RNA interference reveals roles for these proteins in endocytosis and cytokinesis, respectively
Recommended from our members
Conformal Printing of Graphene for Single- and Multilayered Devices onto Arbitrarily Shaped 3D Surfaces
Printing has drawn a lot of attention as a means of low per-unit cost and high throughput patterning of graphene inks for scaled-up thin-form factor device manufacturing. However, traditional printing processes require a flat surface and are incapable of achieving patterning on to 3D objects. Here, we present a conformal printing method to achieve functional graphene-based patterns on to arbitrarily-shaped surfaces. Using experimental design, we formulate a water-insoluble graphene ink with optimum conductivity. We then print single and multi-layered electrically functional structures on to a sacrificial layer using conventional screen printing. The print is then floated on water, allowing the dissolution of the sacrificial layer, while retaining the functional patterns. The single and multilayer patterns can then be directly transferred on to arbitrarily-shaped 3D objects without requiring any post deposition processing. Using this technique, we demonstrate conformal printing of single and multilayer functional devices that include joule heaters, resistive deformation sensors and proximity sensors on hard, flexible and soft substrates, such as glass, latex, thermoplastics, textiles, and even candies and marshmallows. Our simple strategy offers great promises to add new device and sensing functionalities to previously inert 3D surfaces.EPSRC (EP/L016087/1)
Graphene Flagshi
Conformal Printing of Graphene for Single- and Multilayered Devices onto Arbitrarily Shaped 3D Surfaces
Printing has drawn a lot of attention as a means of low per-unit cost and
high throughput patterning of graphene inks for scaled-up thin-form factor
device manufacturing. However, traditional printing processes require a flat
surface and are incapable of achieving patterning on to 3D objects. Here, we
present a conformal printing method to achieve functional graphene-based
patterns on to arbitrarily-shaped surfaces. Using experimental design, we
formulate a water-insoluble graphene ink with optimum conductivity. We then
print single and multi-layered electrically functional structures on to a
sacrificial layer using conventional screen printing. The print is then floated
on water, allowing the dissolution of the sacrificial layer, while retaining
the functional patterns. The single and multilayer patterns can then be
directly transferred on to arbitrarily-shaped 3D objects without requiring any
post deposition processing. Using this technique, we demonstrate conformal
printing of single and multilayer functional devices that include joule
heaters, resistive strain sensors and proximity sensors on hard, flexible and
soft substrates, such as glass, latex, thermoplastics, textiles, and even
candies and marshmallows. Our simple strategy offers great promises to add new
device and sensing functionalities to previously inert 3D surfaces.EPSRC (EP/L016087/1)
Graphene Flagshi
Unexpected Neuronal Protection of SU5416 against 1-Methyl-4-Phenylpyridinium Ion-Induced Toxicity via Inhibiting Neuronal Nitric Oxide Synthase
SU5416 was originally designed as a potent and selective inhibitor of vascular endothelial growth factor receptor-2 (VEGFR-2) for cancer therapy. In this study, we have found for the first time that SU5416 unexpectedly prevented 1-methyl-4-phenylpyridinium ion (MPP +)-induced neuronal apoptosis in cerebellar granule neurons, and decreased 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP)-induced loss of dopaminergic neurons and impairment of swimming behavior in zebrafish in a concentration-dependent manner. However, VEGFR-2 kinase inhibitor II, another specific VEGFR-2 inhibitor, failed to reverse neurotoxicity at the concentration exhibiting anti-angiogenic activity, strongly suggesting that the neuroprotective effect of SU5416 is independent from its anti-angiogenic action. SU5416 potently reversed MPP +-increased intracellular nitric oxide level with an efficacy similar to 7-nitroindazole, a specific neuronal nitric oxide synthase (nNOS) inhibitor. Western blotting analysis showed that SU5416 reduced the elevation of nNOS protein expression induced by MPP +. Furthermore, SU5416 directly inhibited the enzyme activity of rat cerebellum nNOS with an IC 50 value of 22.7 μM. In addition, knock-down of nNOS expression using short hairpin RNA (shRNA) abolished the neuroprotective effects of SU5416 against MPP +-induced neuronal loss. Our results strongly demonstrate that SU5416 might exert its unexpected neuroprotective effects by concurrently reducing nNOS protein expression and directly inhibiting nNOS enzyme activity. In view of the capability of SU5416 to cross the blood-brain barrier and the safety for human use, our findings further indicate that SU5416 might be a novel drug candidate for neurodegenerative disorders, particularly those associated with NO-mediated neurotoxicity. © 2012 Cui et al.published_or_final_versio
Discovery Of An Ultracompact Gamma-ray Millisecond Pulsar Binary Candidate
published_or_final_versio
- …