Method and apparatus for producing concentric hollow spheres

Hollow spheres with precisely concentric inner and outer spherical surfaces are formed by applying vibrations to a nonconcentric hollow sphere while it is at an elevated temperature at which it is fluid or plastic, the vibrations producing internal flows which cause the inner and outer surfaces to become precisely concentric. Concentric spheres can be mass produced by extruding a material such as glass or metal while injecting a stream of gas into the center of the extrusion to form a gas-filled tube. Vibrations are applied to the extruded tube to help break it up into individual bodies of a desired uniform size, the bodies tending to form spherical inner and outer surfaces by reason of surface tension, and the continuing application of vibrations causing these surfaces to become concentric

Acoustic bubble removal method

A method is described for removing bubbles from a liquid bath such as a bath of molten glass to be used for optical elements. Larger bubbles are first removed by applying acoustic energy resonant to a bath dimension to drive the larger bubbles toward a pressure well where the bubbles can coalesce and then be more easily removed. Thereafter, submillimeter bubbles are removed by applying acoustic energy of frequencies resonant to the small bubbles to oscillate them and thereby stir liquid immediately about the bubbles to facilitate their breakup and absorption into the liquid

Acoustic containerless experiment system: A non-contact surface tension measurement

The Acoustic Containerless Experiment System (ACES) was flown on STS 41-B in February 1984 and was scheduled to be reflown in 1986. The primary experiment that was to be conducted with the ACES module was the containerless melting and processing of a fluoride glass sample. A second experiment that was to be conducted was the verification of a non-contact surface tension measurement technique using the molten glass sample. The ACES module consisted of a three-axis acoustic positioning module that was inside an electric furnace capable of heating the system above the melting temperature of the sample. The acoustic module is able to hold the sample with acoustic forces in the center of the chamber and, in addition, has the capability of applying a modulating force on the sample along one axis of the chamber so that the molten sample or liquid drop could be driven into one of its normal oscillation modes. The acoustic module could also be adjusted so that it could place a torque on the molten drop and cause the drop to rotate. In the ACES, a modulating frequency was applied to the drop and swept through a range of frequencies that would include the n = 2 mode. A maximum amplitude of the drop oscillation would indicate when resonance was reached and from that data the surface tension could be calculated. For large viscosity samples, a second technique for measuring surface tension was developed. The results of the ACES experiment and some of the problems encountered during the actual flight of the experiment will be discussed

Heat-operated cryogenic electrical generator

Generator operation is based upon unusual hydrodynamic properties exhibited by liquid helium below superfluid critical point. Below that temperature, liquid behaves as though it is mixture of two interpenetrating fluids. When transition takes place between superfluid and normal states, conservation of momentum is always balanced by normal fluid

Resonant chambers for suspending materials in air

Acoustical pressure of standing wave is used to suspend materials inside resonant chambers. Material is driven to standing-wave antinodes where pressure is lowest. Pressure at nodes is greatest, which prevents suspended material from collecting there. Material can be moved inside chambers by changing wave patterns

Acoustically induced oscillation and rotation of a large drop in space

A 2.5 cm diameter water drop was successfully deployed and manipulated in a triaxial acoustic resonance chamber during a 240 sec low-gravity SPAR rocket flight. Oscillation and rotation were induced by modulating and phase shifting the signals to the speakers. Portions of the film record were digitized and analyzed. Spectral analysis brought out the n = 2, 3, 4 free oscillation modes of the drop, its very low-frequency center-of-mass motion in the acoustic potential well, and the forced oscillation frequency. The drop boundaries were least-square fitted to general ellipses, providing eccentricities of the distorted drop. The normalized equatorial area of the rotating drop was plotted vs a rotational parameter, and was in excellent agreement with values derived from the theory of equilibrium shapes of rotating liquid drops

The dynamics of free liquid drops

The behavior of rotating and oscillating free liquid drops was studied by many investigators theoretically for many years. More recent numerical treatments have yielded predictions which are yet to be verified experimentally. The purpose is to report the results of laboratory work as well as that of the experiments carried out in space during the flight of Spacelab 3, and to compare it with the existing theoretical studies. Ground-based experiments were attempted as a first approximation to the ideal boundary conditions used by the theoretical treatments by neutralizing the overwhelming effects of the Earth's gravitational field with an outside supporting liquid and with the use of levitation technology. The viscous and inertial loading of such a suspending fluid was found to profoundly effect the results, but the information thus gathered has emphasized the uniqueness of the experimental data obtained in the low-gravity environment of space