Competitiveness of Broiler Producers in North America Under Alternative Free Trade Scenarios

International Relations/Trade,

Spatial Equilibrium Analysis of the World Durum Industry Under Alternative Export Policies

International Relations/Trade,

United States and Canadian Free Trade Agreement: Economic Implications

International Relations/Trade,

Comparison of Material Properties and Microstructure of Specimens Built Using the 3D Systems Vanguard HS and Vanguard HiQ+HSSLS Systems

The HiQ upgrade to the 3D Systems Vanguard selective laser sintering (SLS) machine incorporates a revised thermal calibration system and new control software. The paper compares the tensile modulus, tensile strength, elongation at break, flexural modulus, Izod impact resistance and microstructure of two batteries of standard specimens built from recycled Duraform PA (Nylon 12). The first set is built on a Vanguard HS system and the second on the same system with the HiQ upgrade installed. The upgrade reduces user intervention, decreases total build time and improves surface finish. However, using the default processing parameters, tensile, flexure and impact properties are all found to decline after the upgrade is installed.Mechanical Engineerin

Spin-lattice order in frustrated ZnCr2O4

Using synchrotron X-rays and neutron diffraction we disentangle spin-lattice order in highly frustrated ZnCr$_2$O$_4$ where magnetic chromium ions occupy the vertices of regular tetrahedra. Upon cooling below 12.5 K the quandary of anti-aligning spins surrounding the triangular faces of tetrahedra is resolved by establishing weak interactions on each triangle through an intricate lattice distortion. The resulting spin order is however, not simply a N\'{e}el state on strong bonds. A complex co-planar spin structure indicates that antisymmetric and/or further neighbor exchange interactions also play a role as ZnCr$_2$O$_4$ resolves conflicting magnetic interactions

Evidences of a consolute critical point in the Phase Separation regime of La(5/8-y)Pr(y)Ca(3/8)MnO(3) (y = 0.4) single crystals

We report on DC and pulsed electric field sensitivity of the resistance of mixed valent Mn oxide based La(5/8-y)Pr(y)Ca(3/8)MnO(3) (y = 0.4) single crystals as a function of temperature. The low temperature regime of the resistivity is highly current and voltage dependent. An irreversible transition from high (HR) to a low resistivity (LR) is obtained upon the increase of the electric field up to a temperature dependent critical value (V_c). The current-voltage characteristics in the LR regime as well as the lack of a variation in the magnetization response when V_c is reached indicate the formation of a non-single connected filamentary conducting path. The temperature dependence of V_c indicates the existence of a consolute point where the conducting and insulating phases produce a critical behavior as a consequence of their separation.Comment: 5 pages, 6 figures, corresponding author: C. Acha ([email protected]

Intumescent Flame Retardant Polyamide 11 Nanocomposites

Current polyamide 11 and 12 are lacking in fire retardancy and high strength/high heat resistance characteristics for a plethora of fabricated parts that are desired and required for performance driven applications. The introduction of selected nanoparticles such as surface modified montmorillonite (MMT) clay or carbon nanofibers (CNFs), combined with a conventional intumescent flame retardant (FR) additive into the polyamide 11/polyamide 12 (PA11/PA12) by melt processing conditions has resulted in the preparation of a family of intumescent polyamide nanocomposites. These intumescent polyamide 11 and 12 nanocomposites exhibit enhanced polymer performance characteristics, i.e., fire retardancy, high strength and high heat resistance and are expected to expand the market opportunities for polyamide 11 and polyamide 12 polymer manufacturers. The objective of this research is to develop improved polyamide 11 and 12 polymers with enhanced flame retardancy, thermal, and mechanical properties for selective laser sintering (SLS) rapid manufacturing (RM). In the present study, a nanophase was introduced into the polyamide 11 and combining it with a conventional intumescent FR additive via twin screw extrusion. Arkema RILSAN® polyamide 11 molding polymer pellets were examined with two types of nanoparticles: chemically modified montmorillonite (MMT) organoclays, and carbon nanofibers (CNFs); and Clairant’s Exolit® OP 1230 intumescent FR additive were used to create a family of FR intumescent polyamide 11 nanocomposites. Transmission electron microscopy (TEM) was used to determine the degree of nanoparticles dispersion. Injection molded specimens were fabricated for physical, thermal, and flammability measurements. Thermal stability of these intumescent polyamide 11 nanocomposites was examined by TGA. Flammability properties were obtained using the Cone Calorimeter at an external heat flux of 35 kW/m 2 and UL 94 Test Method. Heat deflection temperatures (HDT) were also measured. TEM micrographs, physical, thermal, and flammability properties are presented. FR intumescent polyamide 11 nanocomposites properties are compared with polyamide 11 baseline polymer. Based on flammability and mechanical material performance, selective polymers including polyamide 11 nanocomposites and control polyamide 11 will be cryogenically ground into fine powders for SLS RM processing. SLS specimens will be fabricated for thermal, flammability, and mechanical properties characterization.Mechanical Engineerin

Anisotropic strains and magnetoresistance of La_{0.7}Ca_{0.3}MnO_{3}

Thin films of perovskite manganite La_{0.7}Ca_{0.3}MnO_{3} were grown epitaxially on SrTiO_3(100), MgO(100) and LaAlO_3(100) substrates by the pulsed laser deposition method. Microscopic structures of these thin film samples as well as a bulk sample were fully determined by x-ray diffraction measurements. The unit cells of the three films have different shapes, i.e., contracted tetragonal, cubic, and elongated tetragonal for SrTiO_3, MgO, and LaAlO_3 cases, respectively, while the unit cell of the bulk is cubic. It is found that the samples with cubic unit cell show smaller peak magnetoresistance than the noncubic ones do. The present result demonstrates that the magnetoresistance of La_{0.7}Ca_{0.3}MnO_{3} can be controlled by lattice distortion via externally imposed strains.Comment: Revtex, 10 pages, 2 figure