Self-adapting double and triple-lift absorption cycles for low-grade heat driven cooling

Multiple-lift absorption cycles are an interesting option for cooling and refrigeration driven by waste or renewable heat. Compared with single effect cycles, they allow higher thermal lift or lower thrust, but they often require the use of controlled valves, which can cause stability and control issues. The self-adapting concept, firstly introduced in the two-pump series-flow double-lift cycle, replaces the valve with a phase separator, overcoming this drawback. In this work, five new cycle layouts, incorporating the self-adapting concept, are presented: the one-pump series-flow double-lift cycle and four triple-lift cycles. The cycles are compared in terms of COP and heat duties under various conditions, using NH3–H2O and NH3–LiNO3 as working pairs. It is found that the double-lift cycles have a COP in the range 0.35–0.20, about 0.1 higher than the triple-lift cycles. However, triple-lift cycles accept cooling water temperature up to 8 °C higher. Cycles with multiple pumps have higher efficiency than single-pump cycles, especially at high lift conditions. The use of NH3–H2O as working pair guarantees higher COP at low thermal lift, while NH3–LiNO3 has wider operating range and better performances at high thermal lift

Development of a gas absorption heat pump for residential applications

Thermally Driven Heat Pumps represent an option to reduce the energy consumption for space heating and domestic hot water in hard-to-decarbonize buildings without impacting the electrical grid and utilizing the current and future gaseous energy vectors with high efficiency. Ariston Group and Politecnico di Milano developed a gas absorption heat pump for the residential market, exploiting design and manufacturing solutions to enable large-scale production and introducing technical features to assure high performance over the entire working range. In particular, the use of a variable restrictor setup coupled with a patented solution, called “booster”, can reduce the temperature of the generator at high load and high lift conditions, enabling the heat pump to provide the nominal capacity from -22 °C to +40 °C of outdoor air temperature, with supply temperature up to 70 °C. Moreover, coupled with a specifically designed combustion system, the heat pump can modulate at 1:6 ratio of its nominal capacity. This feature makes it possible to maintain high efficiency also at part load conditions, avoiding the on-off operation and making redundant the installation of inertial buffer. Additionally, an innovative strategy to perform the defrosting of the air-sourced heat exchanger without the need of acting on the thermodynamic cycle has been developed. This allows defrosting operations extremely fast, while offering an almost negligible effect on the heat pump performance and substantially no interruption to the heating service and contributing to the elimination of the need to install an inertial buffer. The thermodynamic core of the appliance was built targeting large scale production. It allows for high specific capacity (kg/kW) and a small footprint (m2/kW) with the ability to serve nominal capacities ranging from 8 to 15 kW based on the configurations. Laboratory test to assess the performances based on the European Standard EN 12309 returned a seasonal gas utilization efficiency on the net calorific of 1.50, a seasonal primary energy ratio of 1.27, and extremely low electrical consumption for the auxiliaries

Modelling of a falling-film evaporator for adsorption chillers.

The objective of the present study was to develop a dynamic model to simulate a prototype falling-film evap-orator that is part of a single-bed adsorption chiller test bench located at the Department of Energy of the Politecnico di Milano. The model is based on the evaporator energy and mass balances and was calibrated and validated using experimental data coming from realistic operating conditions in a range of inlet chilled water temperatures (Tin,chw) from 15 to 25 °C. From the experimental data, it was obtained that the average overall heat transfer conductance (UA) was approximately 530 W/K for all temperatures during the quasi steady-state section of the process. A correlation to calculate the wetted surface through a variable called wettability factor (fwet) was developed from experimental data. The fwet factors were identified using the model and were in the range of 0.80 - 0.20 (Tin,chw= 15 °C) and 0.60 - 0.20 (Tin,chw= 25 °C). It was seen that, the higher the Tin,chw, the lower the fwet values. The UA and saturation temperature (Tref,sat) values from the model were in good accordance with experimental data during the quasi steady-state section of the process. Nevertheless, the final transition stage (i. e., a situation in which the evaporator's refrigerant pool is empty) required an additional hypothesis due to the uncertain process' dynamics. The mass and energy balances that are part of the hydrodynamics and heat transfer sections of the model use Nusselt's classic theory for falling-film

Testing of an adsorption chiller prototype for data center cooling.

The main objective of this study is to present a novel adsorption chiller prototype (designed and realized by the company Sorption Technologies GmbH) that is suitable for cooling of data center servers. This prototype has been designed to fit into commercially-available data center racks. This adsorption prototype has been designed to cool down the rack servers by means of liquid cooling. Furthermore, an air-cooler heat exchanger is also integrated into the adsorption machine to cool down the rest of the rack components (i.e., patch panels, HDD). This way, the adsorption system is able to cool down all rack components. Phase-change chambers are integrated into the adsorption modules for direct evaporation/condensation, removing the need of large vacuum valves and allowing to have a more simpler and compact vacuum system. This also means that the refrigerant distribution is completely done in liquid phase. The prototype is installed at the Department of Energy at the Politecnico di Milano and testing will be carried out using cooling water temperatures in the range 25 – 30 °C and hot water temperatures in the range 55 – 65 °C

Beam test of ALPIDE Sensor

The Alice Pixel Detector (ALPIDE) is developed for the upgrade of the Inner Tracking System of the ALICE experiment at CERN, which will take place during second Long Shutdown in 2019-2020. ALPIDE is a Monolithic Active Pixel Sensor (MAPS), manufactured in a 180 nm CMOS Imaging Process of TowerJazz. Forecoming tracking detectors, based on this technology, will see strong advantages with the application of these sensors as they provide the highest capabilities in spatial resolution and utmost potential for being thin. In this work, the results of the ALPIDE sensor beam test, which took place at the Beam Test Facility of Laboratori Nazionali di Frascati, are presented

Measurement of fragmentation cross sections of 12C ions on a thin gold target with the FIRST apparatus

A detailed knowledge of the light ions interaction processes with matter is of great interest in basic and applied physics. As an example, particle therapy and space radioprotection require highly accurate fragmentation cross-section measurements to develop shielding materials and estimate acute and late health risks for manned missions in space and for treatment planning in particle therapy. The Fragmentation of Ions Relevant for Space and Therapy experiment at the Helmholtz Center for Heavy Ion research (GSI) was designed and built by an international collaboration from France, Germany, Italy, and Spain for studying the collisions of a 12C ion beam with thin targets. The collaboration’s main purpose is to provide the double-differential cross-section measurement of carbon-ion fragmentation at energies that are relevant for both tumor therapy and space radiation protection applications. Fragmentation cross sections of light ions impinging on a wide range of thin targets are also essential to validate the nuclear models implemented inMC simulations that, in such an energy range, fail to reproduce the data with the required accuracy. This paper presents the single differential carbon-ion fragmentation cross sections on a thin gold target, measured as a function of the fragment angle and kinetic energy in the forward angular region (θ 6◦), aiming to provide useful data for the benchmarking of the simulation softwares used in light ions fragmentation applications. The 12C ions used in the measurement were accelerated at the energy of 400 MeV/nucleon by the SIS (heavy ion synchrotron) GSI facility.Comunidad Europea FP7 PITNGA-2008-215840-PARTNERJunta de Andalucía y Ministerio de Ciencia e Innovación P07-FQM-02894 FIS2008-04189 FPA2008- 04972-C0

Correlation between hormonal homeostasis and morphogenic responses in Arabidopsis thaliana seedlings growing in a Cd/Cu/Zn multi-pollution context

To date, almost no information is available in roots and shoots of the model plant Arabidopsis thaliana about the hierarchic relationship between metal accumulation, phytohormone levels, and glutathione/phytochelatin content, and how this relation affects root development. For this purpose, specific concentrations of cadmium, copper and zinc, alone or in triple combination, were supplied for 12 days to in vitro growing seedlings. The accumulation of these metals was measured in roots and shoots, and a significant competition in metal uptake was observed. Microscopic analyses revealed that root morphology was affected by metal exposure, and that the levels of trans-zeatin riboside, dihydrozeatin riboside, indole-3-acetic acid, and the auxin/cytokinin ratio varied accordingly. By contrast, under metal treatments, minor modifications in gibberellic acid and abscisic acid levels occurred. RT-PCR analysis of some genes involved in auxin and cytokinin synthesis (e.g., AtNIT in roots and AtIPT in shoots) showed on average a metal up-regulated transcription. The production of thiol-peptides was induced by all the metals, alone or in combination, and the expression of the genes involved in thiol-peptide synthesis (AtGSH1, AtGSH2, AtPCS1 and AtPCS2) was not stimulated by the metals, suggesting a full post-transcriptional control. Results show that the Cd/Cu/Zn-induced changes in root morphology are caused by a hormonal unbalance, mainly governed by the auxin/cytokinin ratio

Photosynthetic traits and biochemical responses in strawberry (Fragaria × ananassa duch.) leaves supplemented with led lights

Selected light wavebands promote plant development and/or the biosynthesis of targeted metabolites. This work offers new insights on the effects of red (R), green (G), blue (B), and white (W – R:G:B; 1:1:1) LED light supplementation on physiochemical traits of strawberry leaves. Gas exchange and chlorophyll fluorescence parameters, photosynthetic pigments, and superoxide anion (•O2–) content were analysed in plants grown for 1 (T1) and 17 (T17) d with light supplementations. At T1, light supplementations resulted in the enhancement of the de-epoxidation state of xanthophylls and nonphotochemical quenching, but no changes were observed in maximal photosynthetic rate (PNmax), irrespective of light spectra. At T17, xanthophyll contents remained higher only in R-supplemented plants. Overall, W light resulted in higher photosynthesis, whilst R and B light depressed PNmax values and promoted•O2 – formation at T17. G light did not induce variations in photosynthetic traits nor induced oxidative stress at both T1 and T17

Supplemental red LED light promotes plant productivity, “photomodulate” fruit quality and increases Botrytis cinerea tolerance in strawberry

This work provides new evidences on the effect of pre-harvest red (R), green (G), blue (B), and white (W - R:G:B; 1:1:1) LED light supplementation on production, nutraceutical quality and Botrytis cinerea control of harvested strawberry fruit. Yield, fruit color, firmness, soluble solid content, titratable acidity, primary and specialized metabolites, expression of targeted genes and mold development were analyzed in fruit from light-supplemented plants, starting from the strawberry flowering, radiating 250 mu mol m-2 s-1 of light for five hours per day (from 11:00 to 16:00 h), until the fruit harvest. Briefly, R light induced the highest productivity and targeted antho-cyanin accumulation, whilst B and G lights increased the accumulation of primary and secondary metabolites especially belonging to ellagitannin and proanthocyanidin classes. R light also promoted pathogen tolerance in fruit by the upregulation of genes involved in cell wall development (F x aPE41), inhibition of fungus poly-galacturonases (F x aPGIP1) and the degradation of B. cinerea beta-glucans (F x aBG2-1). Our dataset highlights the possibility to use red LED light to increase fruit yield, "photomodulate" strawberry fruit quality and increase B. cinerea tolerance. These results can be useful in terms of future reduction of agrochemical inputs through the use of R light, enhancing, at the same time, fruit production and quality. Finally, further analyses might clarify the effect of pre-harvest supplemental G light on postharvest fruit quality