Impact of Technetium-99m Sestamibi Imaging on the Emergency Department Management and Costs in the Evaluation of Low-risk Chest Pain

Objectives: To assess the impact of rest sestamibi scanning on emergency physicians' (EPs') diagnostic certainty and decision making (as assessed by the hypothetical disposition of patients) for 69 consenting stable patients with suspected acute cardiac ischemia and nondiagnostic electrocardiograms. The resultant impact on costs was examined as a secondary outcome. Methods: Patients with suspected acute cardiac ischemia were injected with 25 mCi of sestamibi within two hours of active pain in one of three emergency department study sites. The probability of acute myocardial infarction (AMI) and unstable angina (UA), and hypothetical disposition decisions were recorded immediately before and after physicians were notified of scan results. Changes in disposition were classified as optimal or suboptimal. For the cost determinations, a cost-based decision support program was used. Results: For the subgroup found to be free of acute cardiac events (ACEs) ( n = 62), the EPs' post-sestamibi scan probabilities for AMI decreased by 11% and UA by 18% (p < 0.001 for both conditions). In seven patients with ACEs, the post-scan probabilities of AMI and UA increased, but neither was statistically significant. Scan results led to hypothetical disposition changes in 29 patients (42%), of which 27 (93%) were optimal (nine patients were reassigned to a lower level of care, two to a higher level, and 16 additional patients to “discharge-home” status). The strategy of scanning all patients who were low to moderate risk for acute cardiac ischemia would result in an increase of direct costs of care of $222 per patient evaluated, due to added cost of sestamibi scanning. Conclusions: Sestamibi scanning results appropriately affected the EPs' estimates of the probability of AMI and UA and improved disposition decisions. Scanning all low-risk patients would likely be associated with increased costs at this medical center.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/73784/1/j.1553-2712.2001.tb02108.x.pd

The Performance of Private Equity Funds: Does Diversification Matter?

This paper is the first systematic analysis of the impact of diversification on the performance of private equity funds. A unique data set allows the exact evaluation of diversification across the dimensions financing stages, industries, and countries. Very different levels of diversification can be observed across sample funds. While some funds are highly specialized others are highly diversified. The empirical results show that the rate of return of private equity funds declines with diversification across financing stages, but increases with diversification across industries. Accordingly, the fraction of portfolio companies which have a negative return or return nothing at all, increase with diversification across financing stages. Diversification across countries has no systematic effect on the performance of private equity funds

The Periotest Method: Implant-Supported Framework Precision of Fit Evaluation

: In this study, the Periotest instrument was used to measure the precision of fit between cast high noble-metal frameworks and the supporting implants in a patient-simulation model. Three framework conditions and three implant-location variables were used to evaluate the rigidity of the assembly as measured by the Periotest method. The framework variables were (1) one-piece castings (OPC); (2) sectioned-soldered inaccurate castings (SSIC); and (3) sectioned-soldered accurate castings (SSAC). The implant-location variables were right anterior (RA), center (C), and left anterior (LA). Materials and Methods : The patient simulation model used consisted of three self-tapping BrÅnemark implants in a reasonable arch curvature in bovine bone. Three working casts were fabricated from the patient-simulation model using polyvinyl siloxane and tapered impression copings. From the working casts, three sets of three frameworks were fabricated as OPCs, SSICs, and SSACs using type 3 high noble alloy. The SSICs were fabricated with a quantitative misfit of 101.6 Μm at the facial surface, between the abutment-to-gold cylinder interface at the C implant location. Periotest value (PTV) measurements were made at the midfacial surface of the frameworks directly above each abutment-to-gold cylinder interface. Three measurements were made for each test condition. The data were analyzed to compare framework condition(s) and implant location(s) using ANOVA and Fisher's Protected Least Significant Difference Comparison Test. Results : The ANOVA showed that significant differences exist between the mean PTV data for framework condition and for implant location (p < .01). Significant differences were shown between the mean PTV data for the SSAC assemblies and the OPC and SSIC assemblies. The SSICs displayed a more positive (+) mean PTV than the OPCs. The OPC assemblies had a more positive mean PTV than the SSAC assemblies. The mean PTV data for the SSAC assemblies had a significantly different PTV (p < .01) than the other two framework condition assemblies. The OPC and the SSIC assemblies had PTVs that were not significantly different. The C implant location was significantly different from the RA and the LA implant locations (p < .01). The RA and the LA implant locations were not significantly different from each other. The C implant location always demonstrated the most positive mean PTV regardless of the framework condition being tested. Conclusions : The Periotest instrument quantified differences in the precision of fit between three framework conditions. The SSAC assemblies were significantly more rigid than the OPC and SSIC assemblies. The OPC and SSIC assemblies' mean PTVs were not significantly different. The mean PTVs for the C implant location and the RA and LA implant locations were significantly different (p < .01). The mean PTVs of the RA and LA implant locations were not significantly different. The implant-location PTVs followed the same rank order for all three framework conditions. The procedures used to fabricate a more precise fit between the framework and the supporting implants is influenced by the skill of the clinician and technician.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/75096/1/j.1532-849X.1996.tb00298.x.pd

Environmental controls on pteropod biogeography along the Western Antarctic Peninsula

Pteropods are abundant zooplankton in the Western Antarctic Peninsula (WAP) and important grazers of phytoplankton and prey for higher trophic levels. We analyzed long-term (1993-2017) trends in summer (January-February) abundance of WAP pteropods in relation to environmental controls (sea ice, sea surface temperature, climate indices, phytoplankton biomass and productivity, and carbonate chemistry) and interspecies dynamics using general linear models. There was no overall directional trend in abundance of thecosomes, Limacina helicina antarctica and Clio pyramidata, throughout the entire WAP, although L. antarctica abundance increased in the slope region and C. pyramidata abundance increased in the South. High L. antarctica abundance was strongly tied to a negative Multivariate El Nino Southern Oscillation Index the previous year. C. pyramidata abundance was best explained by early sea ice retreat 1-yr prior. Abundance of the gymnosome species, Clione antarctica and Spongiobranchaea australis, increased over the time series, particularly in the slope region. Gymnosome abundance was positively influenced by abundance of their prey, L. antarctica, during the same season, and late sea ice advance 2-yr prior. These trends indicate a shorter ice season promotes longer periods of open water in spring/summer favoring all pteropod species. Weak relationships were found between pteropod abundance and carbonate chemistry, and no long-term trend in carbonate parameters was detected. These factors indicate ocean acidification is not presently influencing WAP pteropod abundance. Pteropods are responsive to the considerable environmental variability on both temporal and spatial scales-key for predicting future effects of climate change on regional carbon cycling and plankton trophic interactions

Algebraic Comparison of Partial Lists in Bioinformatics

The outcome of a functional genomics pipeline is usually a partial list of genomic features, ranked by their relevance in modelling biological phenotype in terms of a classification or regression model. Due to resampling protocols or just within a meta-analysis comparison, instead of one list it is often the case that sets of alternative feature lists (possibly of different lengths) are obtained. Here we introduce a method, based on the algebraic theory of symmetric groups, for studying the variability between lists ("list stability") in the case of lists of unequal length. We provide algorithms evaluating stability for lists embedded in the full feature set or just limited to the features occurring in the partial lists. The method is demonstrated first on synthetic data in a gene filtering task and then for finding gene profiles on a recent prostate cancer dataset

Utilization of galactomannan from Gleditsia triacanthos in polysaccharide-based films : effects of interactions between film constituents on film properties

The objective of this work was to evaluate the effect of the concentrations of Gleditsia triacanthos galactomannan and glycerol and the presence of corn oil in the physical properties of edible films. The influence of interactions between those constituents on films' permeability to gases (water vapour, CO2 and O2), solubility in water, mechanical properties and colour was evaluated. The effects of those variables were analysed according to a 23 factorial design; regression coefficients were used to understand the influence of each variable (factor) on the studied properties, and a multifactor model was developed. Results show that galactomannan concentration is the most significant factor affecting the studied properties; moreover, the increase of plasticizer concentration and the presence of oil showed to be the most influent in the particular cases of solubility and transport properties (water vapour permeability and O2 permeability), respectively. These results show that galactomannan films' properties can be tailored to allow their use as alternative to non-biodegradable, non-edible packaging materials.The author M. A. Cerqueira is recipient of a fellowship from Fundacao para a Ciencia e Tecnologia (FCT, SFRH/BPD/72753/2010) and B. W. S. Souza is a recipient of a fellowship from the Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior, Brazil (Capes, Brazil)

Genetic and Other Contributions to Alcohol Intake in Rhesus Macaques ( Macaca mulatta )

The etiology of alcoholism and alcohol abuse, like many other complex diseases, is heterogeneous and multifactorial. Numerous studies demonstrate a genetic contribution to variation in the expression of alcohol-related disorders in humans. Over the past decade, nonhuman primates have emerged as a valuable model for some aspects of human alcohol abuse because of their phylogenetic proximity to humans. Long-term, longitudinal studies of rhesus macaques ( Macaca mulatta ) have provided much insight into environmental influences, especially early life experiences, on alcohol consumption and behavior patterns that characterize alcohol intake later in life. It is not known, however, whether there is a genetic component as well to the variation seen in alcohol consumption in rhesus macaques. A significant genetic component to variation in alcohol consumption in rhesus macaques would show for the first time that like humans, for nonhuman primates additive genetic influences are important. Moreover, their use as a model for alcohol-related disorders in humans would have even greater relevance and utility for designing experiments incorporating the expanding molecular genetics field, and allow researchers to investigate the interaction among the known environmental influences and various genotypes. Methods : In this study, we investigate factors contributing to variation in alcohol consumption of 156 rhesus macaques collected over 10 years when subjects were adolescent in age, belonging to a single extended pedigree, with each cohort receiving identical early rearing backgrounds and subsequent treatments. To measure alcohol consumption each animal was provided unfettered simultaneous access both to an aspartame-sweetened 8.4% (v/v) alcohol-water solution, the aspartame-sweetened vehicle, and to water for 1 hour each day during the early afternoon between 13:00 and 15:00 in their home cages for a period of 5 to 7 weeks. We use multiple regression to identify factors that significantly affect alcohol consumption among these animals and a maximum likelihood program (ASReml) that, controlling for the significant factors, estimates the genetic contribution to the variance in alcohol consumption. Results : Multiple regression analysis identified test cohort and rearing environment as contributing to 57 and 2%, respectively, of the total variance in alcohol consumption. Of the remaining 41% of the variance about half (19.8%) was attributable to additive genetic effects using a maximum likelihood program. Conclusion : This study demonstrates that, as in humans, there are additive genetic factors that contribute to variation in alcohol consumption in rhesus macaques, with other nongenetic factors accounting for substantial portions of the variance in alcohol consumption, Our findings show the presence of an additive genetic component and suggest the potential utility of the nonhuman primate as a molecular genetics tool for understanding alcohol abuse and alcoholism.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/66182/1/j.1530-0277.2006.00044.x.pd

Effects of interactions between the constituents of chitosan-edible films on their physical properties

The main objective of this work was to evaluate the effect of chitosan and plasticizer concentrations and oil presence on the physical and mechanical properties of edible films. The effect of the film constituents and their in-between interactions were studied through the evaluation of permeability, opacity and mechanical properties. The effects of the studied variables (concentrations of chitosan, plasticizer and oil) were analysed according to a 2 3 factorial design. Pareto charts were used to identify the most significant factors in the studied properties (water vapour, oxygen and carbon dioxide permeability; opacity; tensile strength; elongation at break and Young's modulus). When addressing the influence of the interactions between the films' constituents on the properties above, results show that chitosan and plasticizer concentrations are the most significant factors affecting most of the studied properties, while oil incorporation has shown to be of a great importance in the particular case of transport properties (gas permeability), essentially due to its hydrophobicity. Water vapour permeability values (ranging from 1. 62 × 10 -11 to 4. 24 × 10 -11 g m -1 s -1 Pa -1) were half of those reported for cellophane films. Also the mechanical properties (tensile strength values from 0. 43 to 13. 72 MPa and elongation-at-break values from 58. 62% to 166. 70%) were in the range of those reported for LDPE and HDPE. Based on these results, we recommend the use of 1. 5% (w/w) chitosan concentration to produce films, where the oil and plasticizer proportions will have to be adjusted in a case-by-case basis according to the use intended for the material. This work provides a useful guide to the formulation of chitosan-based film-forming solutions for food packaging applications.The author MA Cerqueira is a recipient of a fellowship from Fundacao para a Ciencia e Tecnologia (FCT, SFRH/BD/23897/2005) and BWS Souza is a recipient of a fellowship from the Coordenacao Aperfeicoamento de Pessoal de Nivel Superior, Brazil (Capes, Brazil)