COSSAP simulation model of DS-CDMA indoor microwave ATM LAN

This thesis presents an original work in the area of designing and implementing a simulation testbed for modelling a high speed spread spectrum Asynchronous Transfer Mode (ATM) Local Area Network (LAN). The spread spectrum technique used in this LAN model is Direct Sequence Code Division Multiple Access (DS-CDMA). The simulation model includes at least a physical layer of such a LAN, embedded into the COSSAP1 simulation environment, and has been fully tested. All the newly developed building blocks are comprised of standard blocks from the COSSAP libraries or compatible user-built primitive blocks (only where it is absolutely necessary), and are flexible enough to allow the modification of simulation or model parameters; such as the number of signal channels, modulation method used, different spreading code sequences and so on. All these changes can be made with minimal effort. Another significant contribution made in this thesis is the extended research into evaluating the Bit Error Rate (BER) performance of different spread spectrum COMA coding schemes for an indoor microwave A1M LAN [8]. Different spread spectrum CDMA coding schemes are compared for their transmission error rate in Additive White Gaussian Noise (AWGN) channel with varying transmitted signal power and at different channel Signal to Noise Ratio (SNR) levels. Since a wireless microwave channel is very prone to transmission errors, a major contribution of the simulation testbed developed in this thesis is its use in the finding of an optimal physical layer transmission scheme with the best Bit Error Rate (BER) performance in an indoor environment

The Cuba Library

Concepts and implementation of the Cuba library for multidimensional numerical integration are elucidated.Comment: 6 pages. Talk given at the X International Workshop on Advanced Computing and Analysis Techniques in Physics Research, ACAT 2005, DESY-Zeuthen, Germany, 22-27 May 200

Nanoantenna-Microcavity Hybrids with Highly Cooperative Plasmonic-Photonic Coupling

Nanoantennas offer the ultimate spatial control over light by concentrating optical energy well below the diffraction limit, whereas their quality factor (Q) is constrained by large radiative and dissipative losses. Dielectric microcavities, on the other hand, are capable of generating a high Q-factor through an extended photon storage time but have a diffraction-limited optical mode volume. Here we bridge the two worlds, by studying an exemplary hybrid system integrating plasmonic gold nanorods acting as nanoantennas with an on-resonance dielectric photonic crystal (PC) slab acting as a low-loss microcavity and, more importantly, by synergistically combining their advantages to produce a much stronger local field enhancement than that of the separate entities. To achieve this synergy between the two polar opposite types of nanophotonic resonant elements, we show that it is crucial to coordinate both the dissipative loss of the nanoantenna and the Q-factor of the low-loss cavity. In comparison to the antenna-cavity coupling approach using a Fabry-Perot resonator, which has proved successful for resonant amplification of the antenna's local field intensity, we theoretically and experimentally show that coupling to a modest-Q PC guided resonance can produce a greater amplification by at least an order of magnitude. The synergistic nanoantenna-microcavity hybrid strategy opens new opportunities for further enhancing nanoscale light-matter interactions to benefit numerous areas such as nonlinear optics, nanolasers, plasmonic hot carrier technology, and surface-enhanced Raman and infrared absorption spectroscopies.Comment: Revised version after acceptanc

Pervasive 2D Barcodes for Camera Phone Applications

In a previous study, we evaluated six 2D barcodes using eight criteria for standardization potential: omnidirectional symbol reading, support for low-resolution cameras, reading robustness under different lighting conditions, barcode reading distance, error correction capability, security, support for multiple character sets, and data capacity. We also considered the fidelity of the camera phone\u27s captured image as a metric for gauging reading reliability. Here, we review the six 2D barcodes and then use an additional metric - a first-read rate - to quantitatively verify our earlier results and better gauge reading reliability

The Use of Border in Colour 2D Barcode

In recent years, a trend has emerged in the use of colour to increase the data capacity of the 2D barcode. However the decoding of such colour barcode can be challenging in a mobile environment due to blurring effect that is commonly found in images captured by camera mobile phone. Blurring affects the synchronisation between the cells. It also causes the colour value of the cell to be wrongly interpreted. Hence, this paper proposes the use of border to improve the synchronisation and decoding. Three different types of border and the choice of its width will be investigated

Development Of A Novel Finder Pattern For Effective Color 2D-Barcode Detection

With a camera mobile phone, which has become a must-have device, 2D-barcode works as an interface to bridge the physical and digital world. As the notion of ubiquitous computing has permeated, developing a new 2D-barcode and its applications has been a growing trend worldwide. A 2D-barcode symbol consists of two broad areas: data area and guide area. The components of the latter is collectively called finder pattern and used in locating the 2D-barcode symbol. The failure of finding the target symbol prevents a barcode reader from successfully decoding the barcode. Hence, designing a functional finder pattern is one of the key for improving the robustness of barcode reading, and thus, the entire 2D-barcode system. We have designed a novel finder pattern integrated with a color 2D-barcode for camera mobile phone applications. Through the development and evaluation of the finder pattern for effective color 2D-barcode detection, this paper discusses keys to improve the functionality and reliability of finder patterns, which should be kept in mind when designing a finder pattern for any 2D-barcode symbol

Improved quark mass density- dependent model with quark-sigma meson and quark-omega meson couplings

An improved quark mass density- dependent model with the non-linear scalar sigma field and the $\omega$-meson field is presented. We show that the present model can describe saturation properties, the equation of state, the compressibility and the effective nuclear mass of nuclear matter under mean field approximation successfully. The comparison of the present model and the quark-meson coupling model is addressed.Comment: 15 pages, 6 figure

Nuclear matter and neutron matter for improved quark mass density- dependent model with ρ\rho mesons

A new improved quark mass density-dependent model including u, d quarks, $\sigma$ mesons, $\omega$ mesons and $\rho$ mesons is presented. Employing this model, the properties of nuclear matter, neutron matter and neutron star are studied. We find that it can describe above properties successfully. The results given by the new improved quark mass density- dependent model and by the quark meson coupling model are compared.Comment: 18 pages, 7 figure