82,750 research outputs found
High-frequency high-voltage high-power DC-to-DC converters
The current and voltage waveshapes associated with the power transitor and the power diode in an example current-or-voltage step-up (buck-boost) converter were analyzed to highlight the problems and possible tradeoffs involved in the design of high voltage high power converters operating at switching frequencies in the range of 100 Khz. Although the fast switching speeds of currently available power diodes and transistors permit converter operation at high switching frequencies, the resulting time rates of changes of current coupled with parasitic inductances in series with the semiconductor switches, produce large repetitive voltage transients across the semiconductor switches, potentially far in excess of the device voltage ratings. The need is established for semiconductor switch protection circuitry to control the peak voltages appearing across the semiconductor switches, as well as to provide the waveshaping action require for a given semiconductor device. The possible tradeoffs, as well as the factors affecting the tradeoffs that must be considered in order to maximize the efficiency of the converters are enumerated
A dc model for power switching transistors suitable for computer-aided design and analysis
A model for bipolar junction power switching transistors whose parameters can be readily obtained by the circuit design engineer, and which can be conveniently incorporated into standard computer-based circuit analysis programs is presented. This formulation results from measurements which may be made with standard laboratory equipment. Measurement procedures, as well as a comparison between actual and computed results, are presented
Methods and apparatus employing vibratory energy for wrenching Patent
Ultrasonic wrench for applying vibratory energy to mechanical fastener
Analysis of transistor and snubber turn-off dynamics in high-frequency high-voltage high-power converters
Dc to dc converters which operate reliably and efficiently at switching frequencies high enough to effect substantial reductions in the size and weight of converter energy storage elements are studied. A two winding current or voltage stepup (buck boost) dc-to-dc converter power stage submodule designed to operate in the 2.5-kW range, with an input voltage range of 110 to 180 V dc, and an output voltage of 250 V dc is emphasized. In order to assess the limitations of present day component and circuit technologies, a design goal switching frequency of 10 kHz was maintained. The converter design requirements represent a unique combination of high frequency, high voltage, and high power operation. The turn off dynamics of the primary circuit power switching transistor and its associated turn off snubber circuitry are investigated
Ammonia in the hot core W51-IRS2: 12 new maser lines and a maser component with a velocity drift
With the 100-m telescope at Effelsberg, 19 ammonia (NH3) maser lines have
been detected toward the prominent massive star forming region W51-IRS2. Eleven
of these inversion lines, the (J,K) = (6,2), (5,3), (7,4), (8,5), (7,6), (7,7),
(9,7), (10,7), (9,9), (10,9), and (12,12) transitions, are classified as masers
for the first time in outer space. All detected masers are related to highly
excited inversion doublets. The (5,4) maser originates from an inversion
doublet 340 K above the ground state, while the (12,12) transition, at 1450 K,
is the most highly excited NH3 maser line so far known. Strong variability is
seen not only in ortho- but also in para-NH3 transitions. Bright narrow
emission features are observed, for the first time, in (mostly) ortho-ammonia
transitions, at V ~ 45 km/s, well separated from the quasi-thermal emission
near 60 km/s. These features were absent 25 years ago and show a velocity drift
of about +0.2 km/s/yr. The component is likely related to the SiO maser source
in W51-IRS2 and a possible scenario explaining the velocity drift is outlined.
The 57 km/s component of the (9,6) maser line is found to be strongly linearly
polarized. Maser emission in the (J,K) to (J+1,K) inversion doublets is
strictly forbidden by selection rules for electric dipole transitions in the
ground vibrational state. However, such pairs (and even triplets with (J+2,K))
are common toward W51-IRS2. Similarities in line widths and velocities indicate
that such groups of maser lines arise from the same regions, which can be
explained by pumping through vibrational excitation. The large number of NH3
maser lines in W51-IRS2 is most likely related to the exceptionally high
kinetic temperature and NH3 column density of this young massive star forming
region.Comment: Accepted for publication in Astronomy & Astrophysics, 11 pages, 12
postscript figures, 1 tabl
Optical study of flow and combustion in an HCCI engine with negative valve overlap
One of the most widely used methods to enable Homogeneous Charge Compression Ignition (HCCI) combustion is using negative valve overlapping to trap a sufficient quantity of hot residual gas. The characteristics of air motion with specially designed valve events having reduced valve lift and durations associated with HCCI engines and their effect on subsequent combustion are not yet fully understood. In addition, the ignition process and combustion development in such engines are very different from those in conventional spark-ignition or diesel compression ignition engines. Very little data has been reported concerning optical diagnostics of the flow and combustion in the engine using negative valve overlapping. This paper presents an experimental investigation into the in-cylinder flow characteristics and combustion development in an optical engine operating in HCCI combustion mode. PIV measurements have been taken under motored engine conditions to provide a quantitative flow characterisation of negative valve overlap in-cylinder flows. The ignition and combustion process was imaged using a high resolution charge coupled device (CCD) camera and the combustion imaging data was supplemented by simultaneously recorded in-cylinder pressure data which assisted the analysis of the images. It is found that the flow characteristics with negative valve overlapping are less stable and more valve event driven than typical spark ignition in-cylinder flows, while the combustion initiation locations are not uniformly distributed. © 2006 IOP Publishing Ltd
A webometric analysis of Australian Universities using staff and size dependent web impact factors (WIF)
This study describes how search engines (SE) can be employed for automated, efficient data gathering for Webometric studies using predictable URLs. It then compares the usage of staffrelated Web Impact Factors (WIFs) to sizerelated impact factors for a ranking of Australian universities, showing that rankings based on staffrelated WIFs correlate much better with an established ranking from the Melbourne Institute than commonly used sizedependent WIFs. In fact sizedependent WIFs do not correlate with the Melbourne ranking at all. It also compares WIF data for Australian Universities provided by Smith (1999) for a longitudinal comparison of the WIF of Australian Universities over the last decade. It shows that sizedependent WIF values declined for most Australian universities over the last ten years, while staffdependent WIFs rose
- …