Comparison of Regional Body Composition Estimates Obtained from Dual-energy X-ray Absorptiometry and Single-frequency Bioelectrical Impedance Analysis

The anatomical distribution of fat mass (FM) and lean mass (LM) is significant for health and athletic performance. Dual-energy x-ray absorptiometry (DXA) is often used for regional body composition analysis but is not portable, often inaccessible, and costly, while single-frequency bioelectrical impedance analysis (SFBIA) is a more affordable and accessible alternative. PURPOSE: The purpose of this analysis was to compare regional body composition estimates obtained via DXA and SFBIA. METHODS: After an overnight food and fluid fast, 102 adults (64 F, 38 M; age: 29.2 ± 13.4 y; BMI: 24.3 ± 3.9 kg/m2; BF%: 24.6 ± 8.3%) underwent assessments via DXA and SBFIA, each of which provided estimates of FM and LM for the whole body, torso, legs, and arms. DXA scans were performed using custom-made foam blocks to enhance accuracy of regional body composition estimates. SFBIA was performed using an 8-lead device with a 12-channel multiplexer. Both DXA and SFBIA were performed in the supine position. DXA was designated as the criterion method, and body composition estimates were compared using paired-samples t-tests using a Bonferroni-corrected significance level of p ≤ 0.00625. Additional evaluations were conducted using the correlation coefficient (r), constant error (CE), standard error of the estimate (SEE), and total error (TE). RESULTS: Correlations between DXA and SFBIA were high, and the magnitude of errors was generally small: LMTOTAL (r: 0.97; CE: 1.4 kg; SEE: 2.7 kg; TE: 2.9 kg), LMLEGS (r: 0.85; CE: -0.3 kg; SEE: 2.0 kg; TE: 2.1 kg), LMTORSO (r: 0.92; CE: 1.0 kg; SEE: 2.2 kg; TE: 2.5 kg), LMARMS (r: 0.96; CE: 0.6 kg; SEE: 0.6 kg; TE: 0.8 kg), FMTOTAL (r: 0.95; CE: -2.3 kg; SEE: 2.6 kg; TE: 3.5 kg), FMLEGS (r: 0.83; CE: -1.0 kg; SEE: 1.2 kg; TE: 2.0 kg), FMTORSO (r: 0.90; CE: -1.3 kg; SEE: 2.2 kg; TE: 2.6 kg), and FMARMS (r: 0.89; CE: -0.1 kg; SEE: 0.5 kg; TE: 0.5 kg). Despite the relatively small magnitude of differences in FM and LM estimates between DXA and SFBIA, results of paired-samples t-tests indicated that all differences were statistically significant (p \u3c 0.0001), with the exception of LMLEGS (p=0.13) and FMARMS (p=0.11). CONCLUSION: Despite the fact that body composition estimates for most regions exhibited statistically significant differences between DXA and SFBIA, the strong correlations (r: 0.83 to 0.97) and relatively low magnitude of error (CE: -2.3 to 1.4 kg; TE: 0.8 to 3.5 kg) indicate that SFBIA may be an acceptable alternative to DXA when regional body composition is being evaluated and DXA is unavailable. However, additional research is needed to determine the ability of SFBIA to accurately track changes in regional body composition over time. Due to its low cost, portability, and ease of use, the presently examined SFBIA device may represent a useful tool for the evaluation of regional body composition when more advanced methods are unavailable

Impact of the tip radius on the lateral resolution in piezoresponse force microscopy

We present a quantitative investigation of the impact of tip radius as well as sample type and thickness on the lateral resolution in piezoresponse force microscopy (PFM) investigating bulk single crystals. The observed linear dependence of the width of the domain wall on the tip radius as well as the independence of the lateral resolution on the specific crystal-type are validated by a simple theoretical model. Using a Ti-Pt-coated tip with a nominal radius of 15 nm the so far highest lateral resolution in bulk crystals of only 17 nm was obtained

Validity of Infrared 3-dimensional Scanning for Estimation of Body Composition: A 4-Compartment Model Comparison

Multiple infrared 3-dimensional (3D) scanning technologies exist, including time of flight (ToF) scanners and structured light scanners with static (SL-S) and dynamic (SL-D) configurations. ToF scanners measure depth by using the round-trip time of reflected photons, whereas SL scanners measure deformations in light patterns and allow for creation of a depth image using geometric triangulation. Recently, 3D scanning technologies have been proposed as novel methods of body composition assessment. PURPOSE: The purpose of this analysis was to examine the validity of four different commercially-available 3D scanners for estimation of body fat percentage (BF%) as compared to a 4-compartment (4C) model criterion. METHODS: After an overnight fast, 101 adults (63 F, 38 M; age: 29.3 ± 13.5 y; BMI: 24.3 ± 3.9 kg/m2; BF%: 24.6 ± 8.3%) completed assessments via dual-energy x-ray absorptiometry (DXA), air displacement plethysmography (ADP), bioimpedance spectroscopy (BIS), a standard body mass scale, and four infrared 3D scanners. Two scanners (3DSSL-D1; 3DSSL-D2) utilized structured light scanning with a dynamic configuration, one utilized structured light scanning with a static configuration (3DSSL-S), and one utilized time-of-flight technology (3DSToF). Using the equation of Wang et al. (2002), a criterion 4C estimate of BF% was obtained using DXA for bone mineral, ADP for body volume, scale for body mass, and BIS for total body water. BF% estimates were compared using one-way ANOVA with Bonferroni adjustment for multiple comparisons, and additional evaluations were conducted using the correlation coefficient (r), constant error (CE), standard error of the estimate (SEE), total error (TE), and 95% limits of agreement (LOA). RESULTS: Estimates of BF% did not significantly differ between 4C and any of the 3D scanners. However, metrics of group, individual, and prediction errors varied between scanners: 3DSSL-D1: p=1.0; CE: 0.4%; r: 0.91; SEE: 2.5%; TE: 3.6%; LOA: ±7.0%; 3DSSL-D2: p= 1.0; CE: 0.8%; r: 0.86; SEE: 4.2%; TE: 4.7%; LOA: ±9.2%; 3DSSL-S: p= 1.0; CE: 1.0%; r: 0.81; SEE: 4.0%; TE: 5.0%; LOA: ±9.7%; 3DSToF: p=0.08; CE: -2.9%; r: 0.86, SEE: 2.5%; TE: 5.2%; LOA: ±8.6%. CONCLUSION: All three structured light scanners exhibited low magnitudes of group error (CE ≤ 1%) and may be valid assessment methods when analyzing the body composition of groups. 3DSSL-D1 exhibited the lowest group-level error (i.e. CE), prediction errors (i.e. SEE; TE), and individual error (i.e. LOA) of all scanners. Therefore, this device was deemed the most valid 3D scanner for body composition assessment. 3DSSL-D2, 3DSSL-S, and 3DSToF exhibited comparable TE, although group-level error was lower in 3DSSL-D2 and 3DSSL-S, while the SEE and individual-level error was lower for 3DSToF. However, individual-level errors were relatively high with all scanners (LOA ≥ 7%), which calls into question the utility of these methods for assessing the body composition of individuals. Nonetheless, additional research is needed regarding the ability of 3DS to successfully detect changes in body composition over time

Validity of Four-Compartment Model Body Fat Using Single- or Multi-frequency Bioelectrical Impedance Analysis to Estimate Body Water

Most common body composition assessment techniques make assumptions about the body, including the density and hydration of fat-free mass (FFM). An advantage of the four-compartment (4C) model is the ability to take these FFM characteristics into account when assessing body composition, thus reducing potential error. The total body water (TBW) estimate utilized in 4C models is particularly important due to the large contribution of water to an adult human’s total body mass (~40 - 70%) and FFM (~68 - 81%); however, the impact of utilizing different estimates of TBW within 4C model has not been fully explored. PURPOSE: The purpose of this investigation was to examine the validity of body fat percentage (BF%) estimates produced by 4C models utilizing single- or multi-frequency bioelectrical impedance analysis (BIA) TBW estimates as compared to a criterion 4C with TBW from bioimpedance spectroscopy (BIS). METHODS: After an overnight food and fluid fast, a sample of 101 adults (63 F, 38 M; age: 29.3 ± 13.5 y; BMI: 24.3 ± 4.0 kg/m2; BF%: 24.5 ± 8.3%) completed assessments via dual-energy x-ray absorptiometry (DXA), air displacement plethysmography (ADP), BIS, single-frequency BIA (SFBIA), multi-frequency BIA (MFBIA) and a body mass scale. A criterion 4C model (4CBIS) estimate of BF% was obtained using DXA for bone mineral, ADP for body volume, scale for body mass, and BIS for TBW. BIS was used as the reference TBW method due to its more direct estimation of TBW via mathematical procedures (i.e. Cole modeling and mixture theories) as compared to the prediction equations used by BIA. Alternate 4C estimates of BF% were produced using TBW values from MFBIA (4CMFBIA) and SFBIA (4CSFBIA). BF% estimates were compared using one-way ANOVA, and additional evaluations were conducted using the coefficient of determination (R2), constant error (CE), total error (TE), and 95% limits of agreement (LOA). RESULTS: BF% did not differ between 4CBIS (24.5 ± 8.3%), 4CMFBIA (24.4 ± 8.9%), and 4CSFBIA (25.7 ± 8.3%; p=0.52). 4CMFBIA exhibited negligible CE (-0.1 ± 2.3%), R2 of 0.97, TE of 2.3%, and LOA of 4.4%. 4CSFBIA exhibited a small CE (1.2 ± 1.2%), R2 of 0.98, TE of 1.6%, and LOA of 2.3%. CONCLUSION: At the group level, BF% estimates did not differ between any 4C model, indicating that both SFBIA and MFBIA can serve as viable alternatives to BIS for TBW estimation. Although the magnitude of group error (i.e. CE) was slightly smaller in 4CMFBIA, the individual error (i.e. LOA) and total error were smaller in 4CSFBIA,indicating that SFBIA TBW estimates may be more appropriate when tracking body composition changes within individuals using a 4C model. While the MFBIA and SFBIA technologies employed in the present study exhibited good validity, these results may not be attributable to all BIA analyzers. The quality of assessment device, affordability, portability and ease of use should be considered when utilizing an impedance-based technology for TBW estimation in a 4C model

Acute stress influences the discrimination of complex scenes and complex faces in young healthy men

The stress-induced release of glucocorticoids has been demonstrated to influence hippocampal functions via the modulation of specific receptors. At the behavioral level stress is known to influence hippocampus dependent long-term memory. In recent years, studies have consistently associated the hippocampus with the non-mnemonic perception of scenes, while adjacent regions in the medial temporal lobe were associated with the perception of objects, and faces. So far it is not known whether and how stress influences non-mnemonic perceptual processes. In a behavioral study, fifty male participants were subjected either to the stressful socially evaluated cold-pressor test or to a non-stressful control procedure, before they completed a visual discrimination task, comprising scenes and faces. The complexity of the face and scene stimuli was manipulated in easy and difficult conditions. A significant three way interaction between stress, stimulus type and complexity was found. Stressed participants tended to commit more errors in the complex scenes condition. For complex faces a descriptive tendency in the opposite direction (fewer errors under stress) was observed. As a result the difference between the number of errors for scenes and errors for faces was significantly larger in the stress group. These results indicate that, beyond the effects of stress on long-term memory, stress influences the discrimination of spatial information, especially when the perception is characterized by a high complexity

What our eyes tell us about feelings: Tracking pupillary responses during emotion regulation processes

Emotion regulation is essential for adaptive behavior and mental health. Strategies applied to alter emotions are known to differ in their impact on psychological and physiological aspects of the emotional response. However, emotion regulation outcome has primarily been assessed via self‐report, and studies comparing regulation strategies with regard to their peripheral physiological mechanisms are limited in number. In the present study, we therefore aimed to investigate the effects of different emotion regulation strategies on pupil dilation, skin conductance responses, and subjective emotional responses. Thirty healthy females were presented with negative and neutral pictures and asked to maintain or up‐ and downregulate their upcoming emotional responses through reappraisal or distraction. Pupil dilation and skin conductance responses were significantly enhanced when viewing negative relative to neutral pictures. For the pupil, this emotional arousal effect manifested specifically late during the pupillary response. In accordance with subjective ratings, increasing negative emotions through reappraisal led to the most prominent pupil size enlargements, whereas no consistent effect for downregulation was found. In contrast, early peak dilations were enhanced in all emotion regulation conditions independent of strategy. Skin conductance responses were not further modulated by emotion regulation. These results indicate that pupil diameter is modulated by emotional arousal, but is initially related to the extent of mental effort required to regulate automatic emotional responses. Our data thus provide first evidence that the pupillary response might comprise two distinct temporal components reflecting cognitive emotion regulation effort on the one hand and emotion regulation success on the other hand

Good to be stressed? Improved response inhibition and error processing after acute stress in young and older men

own on whether and how age modulates stress effects on executive functions and their neural correlates. The current study investigated the effect of acute stress on response inhibition and error processing and their underlying cortical processes in younger and older healthy men, using EEG. Forty-nine participants (30 young) were stressed with the Trier Social Stress Test (16 young, 9 older) or underwent a friendly control procedure (14 young, 10 older) and subsequently performed a Go/No-Go task with two levels of task difficulty while performance (reaction time, error rate), stimulus-locked (N2, P3) and response-locked (Ne, Pe) ERPs were measured. Previous results on age-related cognitive deficits were replicated, with slower responses and reduced and delayed N2 and P3 components, as well as reduced Ne and Pe components in older participants. Independent of age, acute stress improved response inhibition, reflected in higher accuracy for compatible trials and enhanced inhibition-related components (N2, P3 and N2d, P3d of the difference waves No-Go minus Go), and improved error processing, reflected in enhanced error-related components (Ne, Pe and Ne_d, Pe_d of the difference waves error minus correct trial). Our findings indicate that acute stress leads to a reallocation of cognitive resources, strengthening inhibition and error processing in young and older healthy men to a similar degree. Neural generators of the analyzed ERPs are mainly part of the salience network, which is upregulated immediately after stress. This offers an explanation as to why response inhibition, in contrast to other executive functions, improves after acute stress

Three-Dimensional X-ray Observation of Atmospheric Biological Samples by Linear-Array Scanning-Electron Generation X-ray Microscope System

Recently, we developed a soft X-ray microscope called the scanning-electron generation X-ray microscope (SGXM), which consists of a simple X-ray detection system that detects X-rays emitted from the interaction between a scanning electron beam (EB) and the thin film of the sample mount. We present herein a three-dimensional (3D) X-ray detection system that is based on the SGXM technology and designed for studying atmospheric biological samples. This 3D X-ray detection system contains a linear X-ray photodiode (PD) array. The specimens are placed under a CuZn-coated Si3N4 thin film, which is attached to an atmospheric sample holder. Multiple tilt X-ray images of the samples are detected simultaneously by the linear array of X-ray PDs, and the 3D structure is calculated by a new 3D reconstruction method that uses a simulated-annealing algorithm. The resulting 3D models clearly reveal the inner structure of the bacterium. In addition, the proposed method can easily be used for diverse samples in a broad range of scientific fields

Ptychographic electron microscopy using high-angle dark-field scattering for sub-nanometre resolution imaging

Diffractive imaging, in which image-forming optics are replaced by an inverse computation using scattered intensity data, could, in principle, realize wavelength-scale resolution in a transmission electron microscope. However, to date all implementations of this approach have suffered from various experimental restrictions. Here we demonstrate a form of diffractive imaging that unshackles the image formation process from the constraints of electron optics, improving resolution over that of the lens used by a factor of five and showing for the first time that it is possible to recover the complex exit wave (in modulus and phase) at atomic resolution, over an unlimited field of view, using low-energy (30 keV) electrons. Our method, called electron ptychography, has no fundamental experimental boundaries: further development of this proof-of-principle could revolutionize sub-atomic scale transmission imaging

A three-dimensional view of structural changes caused by deactivation of fluid catalytic cracking catalysts

Since its commercial introduction three-quarters of a century ago, fluid catalytic cracking has been one of the most important conversion processes in the petroleum industry. In this process, porous composites composed of zeolite and clay crack the heavy fractions in crude oil into transportation fuel and petrochemical feedstocks. Yet, over time the catalytic activity of these composite particles decreases. Here, we report on ptychographic tomography, diffraction, and fluorescence tomography, as well as electron microscopy measurements, which elucidate the structural changes that lead to catalyst deactivation. In combination, these measurements reveal zeolite amorphization and distinct structural changes on the particle exterior as the driving forces behind catalyst deactivation. Amorphization of zeolites, in particular, close to the particle exterior, results in a reduction of catalytic capacity. A concretion of the outermost particle layer into a dense amorphous silica–alumina shell further reduces the mass transport to the active sites within the composite