The influence of interface states on incomplete charge transfer in overlapping gate charge-coupled devices

A simple and accurate model is used to estimate the incomplete charge transfer due to interface states trapping in the overlapping gate charge-coupled devices. It is concluded that trapping in the interface states under the edges of the gates parallel to the active channel limits the performance of the devices at moderate and low frequencies. The influence of the device parameters, dimensions, and clocking waveforms on the signal degradation is discussed. It is shown that increasing the clock voltages, reduces the incomplete charge transfer due to interface state trapping

Microprobe Analyses of the Potassium-Calcium Distribution Relationship in Predentine

Apex regions of continuously growing incisors of Wistar rats were quickly dissected, shock-frozen in liquid nitrogen-cooled propane, freeze-dried at -80 °C and infiltrated with Spurr\u27s resin . 400nm thick dry sections were cut with a diamond knife on an ultramicrotome . Relatively flat sections were transferred with an eye lash onto collodium coated aluminum grids. They were flattened with a glass stick and by placing another collodi um coated aluminum grid just on top of the first one, exerting a uniform pressure . After carbon coating the sections were observed using the backscattered and secondary electron signals in a scanning microscope. The predentine was analyzed for calcium and potassium with an energy dispersive x-ray analysis system. The xray spectra revealed in the predentine regions with beginning dentine formation, near the apex, an uneven K-distribution with very low as well as more prominent x-ray peaks. The K peaks were always lower than those of calcium. In areas with advanced dentine formation, prominent K-peaks were always observed. They were normally higher than the Ca-peaks up to a distance of 5- 10 µ.m from the dentine border. Closer to the dentine border the K concentration decreased while the Ca-peak increased. This might indicate that (besides Na) K is used to balance the negative charges of the macromolecules till K is replaced by Ca at the onset of apatite crystal formation

128-bit multicomparator

A 128-bit multicomparator was designed to perform the search-sort function on arbitrary length data strings. Devices can be cascaded for longer block lengths or paralleled for bit-parallel, word-serial applications. The circuit utilizes a 3-phase static-dynamic shift register cell for data handling and a unique gated EXCLUSIVE-NOR circuit to accomplish the compare function. The compare operation is performed bit parallel between a `data' register and a `key' register with a third `mask' register containing DON'T CARE bits that disable the comparator. The multicomparator was fabricated using p-channel silicon-gate metal-oxide-semiconductor (MOS) technology on a 107/spl times/150 mil chip containing 3350 devices. With transistor-transistor logic (TTL) input, data rates in excess of 2 MHz have been attained. The average power dissipation was 250 mW in the dynamic mode and 300 mW in the static mode

Final stage of the charge-transfer process in charge-coupled devices

The final stages of transfer of charge from under a storage gate is formulated analytically including both fringing-field induced drift and diffusion. Analytic solutions to these equations are presented for constant fringing fields, and a system of equations for spatially varying fields is developed. Approximate solutions for spatially varying fringing fields, when combined with a lumped-parameter model of the self-induced field effects, are shown to give a reasonably accurate representation of the free-charge transfer process

Temperature-Dependence of Magnetically-Active Charge Excitations in Magnetite across the Verwey Transition

We have studied the electronic structure of bulk single crystals and epitaxial films of magnetite Fe$_3$O$_4$. Fe $2p$ core-level spectra show clear differences between hard x-ray (HAX-) and soft x-ray (SX-) photoemission spectroscopy (PES), indicative of surface effects. The bulk-sensitive spectra exhibit temperature ($T$)-dependent charge excitations across the Verwey transition at $T_V$=122 K, which is missing in the surface-sensitive spectra. An extended impurity Anderson model full-multiplet analysis reveals roles of the three distinct Fe-species (A-Fe$^{3+}$, B-Fe$^{2+}$, B-Fe$^{3+}$) below $T_V$ for the Fe $2p$ spectra, and its $T-$dependent evolution. The Fe $2p$ HAXPES spectra show a clear magnetic circular dichroism (MCD) in the metallic phase of magnetized 100-nm-thick films. The model calculations also reproduce the MCD and identify the magnetically distinct sites associated with the charge excitations. Valence band HAXPES shows finite density of states at $E_F$ for the polaronic metal with remnant order above $T_V$, and a clear gap formation below $T_V$. The results indicate that the Verwey transition is driven by changes in the strongly correlated and magnetically active B-Fe$^{2+}$ and B-Fe$^{3+}$ electronic states, consistent with resistivity and bulk-sensitive optical spectra.Comment: 5 pages, 4 figures Accepted in Physical Review Letter

Sign of inverse spin Hall voltages generated by ferromagnetic resonance and temperature gradients in yttrium iron garnet|platinum bilayers

We carried out a concerted effort to determine the absolute sign of the inverse spin Hall effect voltage generated by spin currents injected into a normal metal. We focus on yttrium iron garnet (YIG)|platinum bilayers at room temperature, generating spin currents by microwaves and temperature gradients. We find consistent results for different samples and measurement setups that agree with theory. We suggest a right-hand-rule to define a positive spin Hall angle corresponding to with the voltage expected for the simple case of scattering of free electrons from repulsive Coulomb charges.Comment: incorporated additions from the published versio