Oxygen electrodes for rechargeable alkaline fuel cells-II

The primary objective of this program is the investigation and development of electrocatalysts and supports for the positive electrode of moderate temperature single-unit rechargeable alkaline fuel cells. Approximately six support materials and five catalyst materials have been identified to date for further development

Development of cathodic electrocatalysts for use in low temperature hydrogen/oxygen fuel cells with an alkaline electrolyte Final report, 1 Jul. 1965 - 30 Jun. 1968

Development of cathodic electrocatalysts for use in low temperature hydrogen-oxygen fuel cells with alkaline electrolyt

Screening of redox couples and electrode materials

Electrochemical parameters of selected redox couples that might be potentially promising for application in bulk energy storage systems were investigated. This was carried out in two phases: a broad investigation of the basic characteristics and behavior of various redox couples, followed by a more limited investigation of their electrochemical performance in a redox flow reactor configuration. In the first phase of the program, eight redox couples were evaluated under a variety of conditions in terms of their exchange current densities as measured by the rotating disk electrode procedure. The second phase of the program involved the testing of four couples in a redox reactor under flow conditions with a varity of electrode materials and structures

Optimization and fabrication of porous carbon electrodes for Fe/Cr redox flow cells

Negative electrode development for the NASA chromous/ferric Redox battery is reported. The effects of substrate material, gold/lead catalyst composition and loading, and catalyzation procedures on the performance of the chromium electrode were investigated. Three alternative catalyst systems were also examined, and 1/3 square foot size electrodes were fabricated and delivered to NASA at the conclusion of the program

Development of cathodic electrocatalysts for use in low temperature H2/O2 fuel cells with an alkaline electrolyte Quarterly report, Jul. 1, 1965 - Jun. 30, 1967

Cathodic electrocatalyst materials studied for use in low temperature hydrogen oxygen fuel cells with alkaline electrolyt

New electrocatalysts for hydrogen-oxygen fuel cells

Platinum-silver, palladium-gold, and platinum-gold alloys serve as oxygen reduction catalysts in high-current-density cells. Catalysts were tested on polytetrafluoroethylene-bonded cathodes and a hydrogen anode at an operating cell temperature of 80 degrees C

Development of cathodic electrocatalysts for use in low temperature H2/O2 fuel cells with an alkaline electrolyte Quarterly report, 1 Jul. 1965 - 30 Jun. 1967

Improved oxygen electrode for alkaline hydrox fuel cell

Development of electrodes for the NASA iron/chromium

This program was directed primarily to the development of the negative (Cr3+/Cr2+) electrode for the NASA chromous/ferric Redox battery. The investigation of the effects of substrate processing and gold/lead catalyzation parameters on electrochemical performance were continued. In addition, the effects of reactant cross-mixing, acidity level, and temperature were examined for both Redox couples. Finally, the performance of optimized electrodes was tested in system hardware (1/3 square foot single cell). The major findings are discussed: (1) The recommended processing temperature for the carbon felt, as a substrate for the negative electrode, is 1650 to 1750 C, (2) The recommended gold catalyzation procedure is essentially the published NASA procedure (NASA TM-82724, Nov. 1981) based on deposition from aqueous methanol solution, with the imposition of a few controls such as temperature (25 C) and precatalyzation pH of the felt (7), (3) Experimental observations of the gold catalyzation process and subsequent electron microscopy indicate that the gold is deposited from the colloidal state, induced by contact of the solution with the carbon felt, (4) Electrodeposited lead appears to be present as a thin uniform layer over the entire surface of the carbon fibers, rather than an discrete particles, and (5) Cross-mixing of reactants (Fe-2+ in negative electrode solution or Cr-3+ in the positive electrode solution) did not appear to produce significant interference at either electrode

Several new catalysts for reduction of oxygen in fuel cells

Test results prove nickel carbide or nitride, nickel-cobalt carbide, titanium carbide or nitride, and intermetallic compounds of the transition or noble metals to be efficient electrocatalysts for oxygen reduction in alkaline electrolytes in low temperature fuel cells

Development of cathodic electrocatalysts for use in low temperature H2/O2 fuel cells with an alkaline electrolyte Quarterly report, 1 Oct. - 31 Dec. 1967

Cathodic electrocatalysts development for use in low temperature hydrogen-oxygen fuel cells with alkaline electrolyt