Handling qualities of large flexible control-configured aircraft

The effects on handling qualities of low frequency symmetric elastic mode interaction with the rigid body dynamics of a large flexible aircraft was analyzed by use of a mathematical pilot modeling computer simulation. An extension of the optimal control model for a human pilot was made so that the mode interaction effects on the pilot's control task could be assessed. Pilot ratings were determined for a longitudinal tracking task with parametric variations in the undamped natural frequencies of the two lowest frequency symmetric elastic modes made to induce varying amounts of mode interaction. Relating numerical performance index values associated with the frequency variations used in several dynamic cases, to a numerical Cooper-Harper pilot rating has proved successful in discriminating when the mathematical pilot can or cannot separate rigid from elastic response in the tracking task

A unique formulation of elastic airplane longitudinal equations of motion

Control-configured vehicle technology has increased the demand for detailed analysis of dynamic stability and control, handling and ride qualities, and control system dynamics at early stages of preliminary design. An approximate, but reasonably accurate, set of equations of motion are needed for these early analyses. Such a formulation is developed for the longitudinal dynamics of elastic airplanes. It makes use of only rigid-body aerodynamic stability derivatives in formulating the forces and moments due to elastic motion. Verification of accuracy using data for the B-1 airplane shows very good agreement. Frequencies and damping ratios of the coupled modes corresponding to complex roots of the characteristic equations agree closely with four symmetric elastic modes included

Effects of dynamic aeroelasticity on handling qualities and pilot rating

Pilot performance parameters, such as pilot ratings, tracking errors, and pilot comments were determined for a longitudinal pitch tracking task using a large, flexible bomber with parametric variations in the undamped natural frequencies of the two lowest frequency symmetric elastic modes. This pitch tracking task was programmed on a fixed base simulator with an electronic attitude-director display of pitch command, pitch angle, and pitch error. Low frequency structural flexibility significantly affects the handling qualities and pilot ratings in the task evaluated

One-step dual purpose joining technique

This fastener used in induction heating is a wire screen basically of an eddy current carrying material such as carbon steel. Selected wires in the screen are copper, sheathed in an insulating material. The screen is placed between two sheets of thermoplastics. When inductively heated, the composite softens and flows around the apertures of the screen. After this heating and joining, the copper wires may be used to conduct electricity

Ride quality sensitivity to SAS control law and to handling quality variations

The RQ trends which large flexible aircraft exhibit under various parameterizations of control laws and handling qualities are discussed. A summary of the assumptions and solution technique, a control law parameterization review, a discussion of ride sensitivity to handling qualities, and the RQ effects generated by implementing relaxed static stability configurations are included

The Food Safety and Inspection Service\u27s Lack of Statutory Authority to Suspend Inspection for Failure to Comply with HACCP Regulations

Since the implementation of the Mega-Reg, the agency has had mixed success with its new enforcement procedures. Although most establishments have chosen to work with FSIS to modify their procedures to allay any concerns the agency had, on a few occasions, no compromise was reached. In these cases, the establishment filed suit in federal district court challenging the agency\u27s authority to remove inspectors for failure to comply with the Mega-Reg. In the three cases where the agency\u27s authority was challenged, the establishment was successful and inspection was restored

Effects of control laws and relaxed static stability on vertical ride quality of flexible aircraft

State variable techniques are utilized to generate the RMS vertical load factors for the B-52H and B-1 bombers at low level, mission critical, cruise conditions. A ride quality index is proposed to provide meaningful comparisons between different controls or conditions. Ride quality is shown to be relatively invariant under various popular control laws. Handling quality variations are shown to be major contributors to ride quality variations on both vehicles. Relaxed static stability is artificially implemented on the study vehicles to investigate its effects on ride quality. The B-52H ride quality is generally degraded when handling characteristics are automatically restored by a feedback control to the original values from relaxed stability conditions. The B-1 airplane shows little ride quality sensitivity to the same analysis due to the small rigid body contribution to load factors at the flight condition investigated

Exhibits: Boys and girls demonstration clubs

The Oklahoma Cooperative Extension Service periodically issues revisions to its publications. The most current edition is made available. For access to an earlier edition, if available for this title, please contact the Oklahoma State University Library Archives by email at [email protected] or by phone at 405-744-6311