690 research outputs found
A Study on the Vertical Navigation of High Rise Buildings
Scroll bar and stab touch screen controls were designed and compared to a soft keyboard to help firefighters perform vertical navigation tasks for high-rise buildings depicted on a graphical display. 18 male subjects were asked to accomplish three experimental tasks: 1) input floor number and navigate to the floor, 2) switch the current floor to another one that was two floors higher/lower, and 3) check around the floors in the high rise to find the one on fire. Task completion time and number of screen operations were recorded. Results showed that, keyboard method of floor selection was the fastest, and scroll bar the slowest. In Task 1 and Task 2, the least number of screen operations were shown with soft keyboard. But in Task 3, keyboard was slowest. The other two control methods were not sensitive to tasks. Design implications for scroll bar and stab controls are discussed. </div
Solid Loss of Carrots During Simulated Gastric Digestion
The knowledge of solid loss kinetics of foods during digestion is crucial for understanding the factors that constrain the release of nutrients from the food matrix and their fate of digestion. The objective of this study was to investigate the solid loss of carrots during simulated gastric digestion as affected by pH, temperature, viscosity of gastric fluids, mechanical force present in stomach, and cooking. Cylindrical carrot samples were tested by static soaking method and using a model stomach system. The weight retention, moisture, and loss of dry mass were determined. The results indicated that acid hydrolysis is critical for an efficient mass transfer and carrot digestion. Internal resistance rather than external resistance is dominant in the transfer of soluble solids from carrot to gastric fluid. Increase in viscosity of gastric fluid by adding 0.5% gum (w/w) significantly increased the external resistance and decreased mass transfer rate of carrots in static soaking. When mechanical force was not present, 61% of the solids in the raw carrot samples were released into gastric fluid after 4 h of static soaking in simulated gastric juice. Mechanical force significantly increased solid loss by causing surface erosion. Boiling increased the disintegration of carrot during digestion that may favor the loss of solids meanwhile reducing the amount of solids available for loss in gastric juice. Weibull function was successfully used to describe the solid loss of carrot during simulated digestion. The effective diffusion coefficients of solids were calculated using the Fick’s second law of diffusion for an infinite cylinder, which are between 0.75 × 10−11 and 8.72 × 10−11 m2/s, depending on the pH of the gastric fluid
Failure of dual radius hydroxyapatite-coated acetabular cups
<p>Abstract</p> <p>Introduction</p> <p>Many kind of hydroxyapatite-coated cups were used, with favorable results in short term studies; it was supposed that its use could improve osteointegration of the cup, enhancing thus stability and survivorship. The purpose of this study is to analyze the long term behavior of the hemispheric HA coated, Dual Radius Osteonics cup and to discuss the way of failure through the exam of the revised components and of both periacetabular and osteolysis tissue.</p> <p>Materials and Methods</p> <p>Between 1994 and 1997, at the Department of Orthopedic Sciences of the Insubria University, using the posterolateral approach, were implanted 276 Dual Radius Osteonics<sup>® </sup>in 256 patients, with mean age of 63 years.</p> <p>Results</p> <p>At a mean follow-up of 10 years (range 8–12 years), 183 cups in 165 patients, were available for clinical and radiographical evaluation. 22 Cups among the 183 were revised (11%). The cause of revision was aseptic loosening in 17 cases, septic loosening in one case, periprosthetic fracture in another case, osteolysis and polyethylene wear in two cases and, finally, recurrent dislocations in the last one. In the remaining patients, mean HHS increased from a preoperative value of 50,15 to a postoperative value of 92,69. The mean polyethylene wear was 1,25 mm (min. 0,08, max. 3,9 mm), with a mean annual wear of 0,17 mm. The mean acetabular migration on the two axis was 1,6 mm and 1,8 mm. Peri-acetabular osteolysis were recorded in 89% of the implants (163 cases). The cumulative survivorship (revision as endpoint) at the time was 88,9%.</p> <p>Conclusion</p> <p>Our study confirms the bad behavior of this type of cup probably related to the design, to the method of HA fixation. The observations carried out on the revised cup confirm these hypotheses but did not clarify if the third body wear could be a further problem. Another interesting aspect is the high incidence of osteolysis, which are often asymptomatic becoming a problem for the surgeon as the patient refuses the possibility of a revision.</p
Comparison of existing syncope rules and newly proposed anatolian syncope rule to predict short-term serious outcomes after syncope in the Turkish population
Trends of increase in western medical services in traditional medicine hospitals in china
Background:
Compare changes in types of hospital service revenues between traditional Chinese medicine (TCM) hospitals and Western-medicine based general hospitals. Methods:
97 TCM hospitals and 103 general hospitals were surveyed in years of 2000 and 2004. Six types of medical service revenue between the two types of hospitals were compared overtime. The national statistics from 1999 to 2008 were also used as complementary evidence. Results:
For TCM hospitals, the percentage of service revenue from Western medicine increased from 44.3% to 47.4% while the percentage of service revenue from TCM declined from 26.4% to 18.8% from 1999 to 2004. Percentages of revenue from laboratory tests and surgical procedures for both types of hospitals increased and the discrepancy between the two types of hospitals was narrowed from 1999 to 2004. For TCM hospitals, revenues from laboratory tests increased from 3.64% to 5.06% and revenues from surgical procedures increased from 3.44% to 7.02%. General hospitals\u27 TCM drug revenue in outpatient care declined insignificantly from 5.26% to 3.87%, while the decline for the TCM hospitals was significant from 19.73% to 13.77%. The national statistics from 1999 to 2008 showed similar trends that the percentage of revenue from Western medicine for TCM hospitals increased from 59.6% in 1999 to 62.2% in 2003 and 66.1% in 2008 while the percentage of revenue from TCM for TCM hospitals decreased from 18.0% in 1999, 15.4% in 2003, and 13.7% in 2008. Conclusion:
Western medicine has become a vital revenue source for TCM hospitals in the current Chinese health care environment where government subsidies to health care facilities have significantly declined. Policies need to encourage TCM hospitals to identify their own special and effective services, improve public perception, increase demand, strengthen financial sources, and ultimately make contributions to preserving one of the national treasures
Accelerated Profile HMM Searches
Profile hidden Markov models (profile HMMs) and probabilistic inference methods have made important contributions to the theory of sequence database homology search. However, practical use of profile HMM methods has been hindered by the computational expense of existing software implementations. Here I describe an acceleration heuristic for profile HMMs, the “multiple segment Viterbi” (MSV) algorithm. The MSV algorithm computes an optimal sum of multiple ungapped local alignment segments using a striped vector-parallel approach previously described for fast Smith/Waterman alignment. MSV scores follow the same statistical distribution as gapped optimal local alignment scores, allowing rapid evaluation of significance of an MSV score and thus facilitating its use as a heuristic filter. I also describe a 20-fold acceleration of the standard profile HMM Forward/Backward algorithms using a method I call “sparse rescaling”. These methods are assembled in a pipeline in which high-scoring MSV hits are passed on for reanalysis with the full HMM Forward/Backward algorithm. This accelerated pipeline is implemented in the freely available HMMER3 software package. Performance benchmarks show that the use of the heuristic MSV filter sacrifices negligible sensitivity compared to unaccelerated profile HMM searches. HMMER3 is substantially more sensitive and 100- to 1000-fold faster than HMMER2. HMMER3 is now about as fast as BLAST for protein searches
Refractive error characteristics in patients with congenital blepharoptosis before and after ptosis repair surgery
Using structural motif descriptors for sequence-based binding site prediction
All authors are with the Biotechnological Center, TU Dresden, Tatzberg 47-51, 01307 Dresden, Germany and -- Wan Kyu Kim is with the Institute for Cellular and Molecular Biology, University of Texas at Austin, Austin, TX 78712, USABackground: Many protein sequences are still poorly annotated. Functional characterization of a protein is often improved by the identification of its interaction partners. Here, we aim to predict protein-protein interactions (PPI) and protein-ligand interactions (PLI) on sequence level using 3D information. To this end, we use machine learning to compile sequential segments that constitute structural features of an interaction site into one profile Hidden Markov Model descriptor. The resulting collection of descriptors can be used to screen sequence databases in order to predict functional sites. -- Results: We generate descriptors for 740 classified types of protein-protein binding sites and for more than 3,000 protein-ligand binding sites. Cross validation reveals that two thirds of the PPI descriptors are sufficiently conserved and significant enough to be used for binding site recognition. We further validate 230 PPIs that were extracted from the literature, where we additionally identify the interface residues. Finally we test ligand-binding descriptors for the case of ATP. From sequences with Swiss-Prot annotation "ATP-binding", we achieve a recall of 25% with a precision of 89%, whereas Prosite's P-loop motif recognizes an equal amount of hits at the expense of a much higher number of false positives (precision: 57%). Our method yields 771 hits with a precision of 96% that were not previously picked up by any Prosite-pattern. -- Conclusion: The automatically generated descriptors are a useful complement to known Prosite/InterPro motifs. They serve to predict protein-protein as well as protein-ligand interactions along with their binding site residues for proteins where merely sequence information is available.Institute for Cellular and Molecular [email protected]
Non-Sterilized Fermentative Production of Polymer-Grade L-Lactic Acid by a Newly Isolated Thermophilic Strain Bacillus sp. 2–6
-lactic acid is another limitation for PLA polymers to compete with conventional plastics.-lactic acid concentration of 182.0 g/liter was obtained from 30-liter fed-batch fermentation with an average productivity of 3.03 g/liter/h and product optical purity of 99.4%.-lactic acid production from renewable resources
- …