Lattice Boltzmann modeling of dendritic growth in forced and natural convection

AbstractA two-dimensional (2D) coupled model is developed for the simulation of dendritic growth during alloy solidification in the presence of forced and natural convection. Instead of conventional continuum-based Navier–Stokes (NS) solvers, the present model adopts a kinetic-based lattice Boltzmann method (LBM), which describes flow dynamics by the evolution of distribution functions of moving pseudo-particles, for the numerical computations of flow dynamics as well as thermal and solutal transport. The dendritic growth is modeled using a solutal equilibrium approach previously proposed by Zhu and Stefanescu (ZS), in which the evolution of the solid/liquid interface is driven by the difference between the local equilibrium composition and the local actual liquid composition. The local equilibrium composition is calculated from the local temperature and curvature. The local temperature and actual liquid composition, controlled by both diffusion and convection, are obtained by solving the LB equations using the lattice Bhatnagar–Gross–Krook (LBGK) scheme. Detailed model validation is performed by comparing the simulations with analytical predictions, which demonstrates the quantitative capability of the proposed model. Furthermore, the convective dendritic growth features predicted by the present model are compared with those obtained from the Zhu–Stefanescu and Navier–Stokes (ZS–NS) model, in which the fluid flow is calculated using an NS solver. It is found that the evolution of the solid fraction of dendritic growth calculated by both models coincides well. However, the present model has the significant advantages of numerical stability and computational efficiency for the simulation of dendritic growth with melt convection

Thermal expansion and pressure effect in MnWO4

MnWO4 has attracted attention because of its ferroelectric property induced by frustrated helical spin order. Strong spin-lattice interaction is necessary to explain ferroelectricity associated with this type of magnetic order.We have conducted thermal expansion measurements along the a, b, c axes revealing the existence of strong anisotropic lattice anomalies at T1=7.8 K, the temperature of the magnetic lock-in transition into a commensurate low-temperature (reentrant paraelectric) phase. The effect of hydrostatic pressure up to 1.8 GPa on the FE phase is investigated by measuring the dielectric constant and the FE polarization. The low- temperature commensurate and paraelectric phase is stabilized and the stability range of the ferroelectric phase is diminished under pressure.Comment: 2 pages, 3 figures. SCES conference proceedings, houston, TX, 2007. to be published in Physica

Characterization of an INVS Model IV Neutron Counter for High Precision (γ,n\gamma,n) Cross-Section Measurements

A neutron counter designed for assay of radioactive materials has been adapted for beam experiments at TUNL. The cylindrical geometry and 60% maximum efficiency make it well suited for ($\gamma,n$) cross-section measurements near the neutron emission threshold. A high precision characterization of the counter has been made using neutrons from several sources. Using a combination of measurements and simulations, the absolute detection efficiency of the neutron counter was determined to an accuracy of $\pm$ 3% in the neutron energy range between 0.1 and 1 MeV. It is shown that this efficiency characterization is generally valid for a wide range of targets.Comment: 22 pages, 13 figure

Millimeter-wave GaN-based HEMT development at ETH-Zürich

We review the AlGaN/GaN high electron mobility transistor (HEMT) activities in the Millimeter-Wave Electronics Group at ETH-Zürich. Our group's main thrust in the AlGaN/GaN arena is the extension of device bandwidth to higher frequency bands. We demonstrated surprising performances for AlGaN/GaN HEMTs grown on high-resistivity (HR) silicon (111) substrates, and extended cutoff frequencies of 100nm gate devices well into the millimeter (mm)-wave domain. Our results narrow the performance gap between GaN-on-SiC (or sapphire) and GaN-on-silicon and establish GaN-on-Si as a viable technology for low-cost mm-wave electronics. We here contrast the difference in behaviors observed in our laboratory between nominally identical devices built on high-resistivity silicon (HR-Si) and on sapphire substrates; we show high-speed devices with high-cutoff frequencies and breakdown voltages which combine fT,MAX×BV products as high as 5-10 THz V, and show AlGaN/GaN HEMTs with fT values exceeding 100GHz on HR-Si. Although the bulk of our activities have so far focused on AlGaN/GaN HEMTs on HR-Si, our process produces excellent device performances when applied to GaN HEMTs on SiC as well: 100nm gate transistors with fT>125GHz have been realized at ETH-Züric

Effect of substituting guinea grass with sunflower hulls on production performance and digestion traits in fattening rabbits

[EN] The objective of this study was to evaluate the use of sunflower hulls (SH) to substitute guinea grass (GG), traditionally used as a fibre source in the diets of fattening rabbits, on production performance, coefficients of total tract apparent digestibility (CTTAD) of nutrients, gastrointestinal tract development and caecal fermentation. A total of 160 mixed sex Hyla commercial meat rabbits were allocated to 4 experimental groups (40 per treatment) differing in the SH level inclusion in the diet offered to rabbits from 40 to 90 d of age: 0, 30, 60 and 90 g/kg on as-fed basis: SH0, SH30, SH60 and SH90 groups, respectively. Growth performance was recorded from 47 to 90 d of age, CTTAD of nutrients from 86 to 90 d of age, and gastrointestinal tract development, caecal fermentation and carcass traits were determined at 90 d of age. Increasing substitutions of SH in the diet indicated effects on growth performance, as higher feed intake and lower feed efficiency were observed in SH90 compared with SH0 (P-linear<0.05). Moreover, the higher SH substitution diet (SH60 and SH90) increased the relative caecum weight (P-linear<0.05). A linear negative effect of SH inclusion was observed for the digestibility of neutral detergent fibre (CTTAD from 0.294 to 0.232) and acid detergent fibre (CTTAD from 0.182 to 0.136; P-linear<0.05). Dietary SH substitution level had a quadratic effect on the villus height of the duodenum, jejunum and ileum obtained (P-quadratic<0.05), and the highest were observed in the SH60 group. There was a quadratic effect on the pH of caecum content (P-quadratic<0.05), and the lowest was 6.08 in SH30 group. The total volatil fatty acids increased linearly with increasing SH in diets (from 71.11 to 76.98 mmol/L; P-linear<0.05), and when dietary SH increased, the proportion of acetate tended to increase (P-linear<0.05), and the proportions of propionic and butyric were decreased (P-linear<0.05, respectively). Substitution of GG with SH had no effect on carcass characteristics and meat quality. The current work shows that SH can replace up to 60 g/kg in diets for fattening rabbits, with no adverse impact on aspects of production performance or digestion traits.This study was supported by the earmarked fund for Modern Agro-industry Technology Research System (CARS-43-B-1) and Funds of Shandong “Double Tops” Programme.Liu, G.; Sun, C.; Zhao, X.; Liu, H.; Wu, Z.; Li, F. (2018). Effect of substituting guinea grass with sunflower hulls on production performance and digestion traits in fattening rabbits. World Rabbit Science. 26(3):217-225. https://doi.org/10.4995/wrs.2018.9375SWORD21722526

Effect of substituting guinea grass with soybean hulls on production performance and digestion traits in fattening rabbits

[EN] The objective of this study was to evaluate the use of soybean hulls (SH) to substitute guinea grass (GG), traditionally used as fibre source in the diets of fattening rabbits on performance, coefficients of total tract apparent digestibility (CTTAD) of nutrients, gastrointestinal tract development and caecum fermentation. A total of 160 mixed sex Hyla commercial meat rabbits were allocated to 4 experimental groups (40 per treatment) differing in the SH level inclusion in the diet offered to rabbits from 40 to 90 d of age: 0, 50, 100 and 200 g/kg as-fed basis: SH0, SH50, SH100 and SH200 groups, respectively. Growth performance was recorded from 40 to 90 d of age, CTTAD of nutrients from 86 to 90 d of age, and gastrointestinal tract development, caecum fermentation and carcass traits were determined at 90 d of age. Average daily feed intake and the feed/gain ratio were lower in SH100 and SH200 groups than in SH0 group (P0.05). In conclusion, our results suggest that SH can substitute GG in the diets of fattening rabbits up to 200 g/kg in diet with no adverse effects on the growth performance, feed efficiency, carcass traits and meat quality.This study was supported by the earmarked fund for Modern Agro-industry Technology Research System (CARS-44-B-1).Shang, S.; Wu, Z.; Liu, G.; Sun, C.; Ma, M.; Li, FC. (2017). Effect of substituting guinea grass with soybean hulls on production performance and digestion traits in fattening rabbits. World Rabbit Science. 25(3):241-249. https://doi.org/10.4995/wrs.2017.6654SWORD24124925

A novel coupler design and analysis with shielding material tests for a CPT system of electric vehicles based on electromagnetic resonant coupling

In this paper, a contactless power transfer (CPT) system using a novel geometrically enhanced energy transfer coupler with three different shielding materials has been built and analysed, along with the evaluations from aspects of electromagnetics and RMS power transmitting based on electromagnetic resonant coupling. A CPT system design improvement with the proposed H-shape ferromagnetic cores and the combined semi-enclosed passive electromagnetic shielding methods have been investigated in terms of generated electromagnetic field characteristics, system power transfer ratings, system efficiency optimization and performances of shielding materials. The results have shown that, across the range of operating frequency of the CPT system, aluminium shielding as a metallic material method could deliver better overall CPT system performance than other two ferromagnetic materials, steel 1010 and ferrite. In addition, the coupler prototype design limitations, misalignment tolerance and the passive shielding design considerations including distance between windings and inner surfaces of shielding shells have been discussed

Phantom Cosmology with Non-minimally Coupled Real Scalar Field

We find that the expansion of the universe is accelerating by analyzing the recent observation data of type \textsc{I}a supernova(SN-Ia) .It indicates that the equation of state of the dark energy might be smaller than -1,which leads to the introduction of phantom models featured by its negative kinetic energy to account for the regime of equation of state parameter $w<-1$.In this paper the possibility of using a non-minimally coupled real scalar field as phantom to realize the equation of state parameter $w<-1$ is discussed.The main equations which govern the evolution of the universe are obtained.Then we rewrite them with the observable quantities.Comment: 12 pages, 2 figures. Accepted for publication in Gen.Rel.Gra

Ultrahigh field electron cyclotron resonance absorption in In1−x_{1-x}Mnx_xAs films

We have carried out an ultrahigh field cyclotron resonance study of $n$-type In$_{1-x}$Mn$_x$As films, with Mn composition $x$ ranging from 0 to 12%, grown on GaAs by low temperature molecular beam epitaxy. We observe that the electron cyclotron resonance peak shifts to lower field with increasing $x$. A detailed comparison of experimental results with calculations based on a modified Pidgeon-Brown model allows us to estimate the {\em s-d} and {\em p-d} exchange coupling constants, $\alpha$ and $\beta$, for this important III-V dilute magnetic semiconductor system.Comment: 4 pages, 4 figure

Ab-initio simulations on growth and interface properties of epitaxial oxides on silicon

The replacement of SiO2 by so-called high-k oxides is one of the major challenges for the semiconductor industry to date. Based on electronic structure calculations and ab-initio molecular dynamics simulations, we are able to provide a consistent picture of the growth process of a class of epitaxial oxides around SrO and SrTiO3. The detailed understanding of the interfacial binding principles has also allowed us to propose a way to engineer the band-offsets between the oxide and the silicon substrate.Comment: 6 pages, 6 figures, proceeding for the INFOS2005 conference (http://www.imec.be/infos/