2,092 research outputs found
Safety of Li-SOCl2 cells
The safety of lithium thionyl chloride cells has been a concern of JPL for some time in the development of these cells for NASA's use. Because the safety problems are complex and several issues are interrelated it was decided that it would be best to put together an organized review of the safety issues, which are reviewed here. Hazards are classified in three categories: (1) cell leakage, a problem dealing with construction or materials; (2) venting of toxic gases through seals and welds, considered a mild hazard in which electrolyte and gas is released; and (3) violent rupture or controlled rupture of cells with the possibility of explosion of the materials inside. These hazards and their effects are detailed along with possible ways of dealing with them
Test results of JPL LiSOCl sub 2 cells
In the development of high rate Li-SO-Cl2 cells for various applications, the goal is to achieve 300 watt-hours per kilogram at the C/2 (5 amp) rate in a D cell configuration. The JPL role is to develop the understanding of the performance, life, and safety limiting characteristics in the cell and to transfer the technology to a manufacturer to produce a safe, high quality product in a reproducible manner. The approach taken to achieve the goals is divided into four subject areas: cathode processes and characteristics; chemical reactions and safety; cell design and assembly; and performance and abuse testing. The progress made in each of these areas is discussed
An update of the JPL program to develop Li-SOCl2 cells
The goal of producing spiral wound D cell was met. The cell design and electrodes, particularly the carbon cathodes were produced in-house. Also all parts were assembled, the welding performed, the electrolyte aided and the cells sealed in-house. The lithium capacity (theoretical) was 19.3 Ah and that of the SOCl2 in the 1.8 m LiAlCl4 electrolyte, 16.4 Ah (a greater excess of SOCl2 is necessary for safe high rate operation). The electrode surface area was 452 sq cm. The carbon electrode comprised Shawinigen Black/Teflon -30 (90/10 by weight) mixture 0.020 inches thick on an expanded metal screen prepared in the JPL laboratory. There were two tab connections to the cathode. The 0.0078 inch thick lithium foil was rolled into an expanded nickel screen. The separator was Mead 934-5 fiberglass material
Development of ambient temperature secondary lithium cells
JPL is developing ambient temperature secondary lithium cells for future spacecraft applications. Prior studies on experimental laboratory type Li-TiS2 cells yielded promising results in terms of cycle life and rate capability. To further assess the performance of this cell, 5 Ah engineering model cells were developed. Initially baseline cells were designed and fabricated. Each cell had 15 cathodes and 16 anodes and the ratio of anode to cathode capacity is 6:1. A solution of 1.5 molar LiAsF6 in 2Me-THF was used as the electrolyte. Cells were evaluated for their cycle life at C/1 and C/5 discharge rates and 100 percent depth of discharge. The cells were cycled between voltage limits 1.7 and 2.8 volts. The rate of charge in all cases is C/10. The results obtained indicate that cells can operate at C/10 to C/2 discharge rates and have an initial energy density of 70 Wh/kg. Cells delivered more than 100 cycles at C/2 discharge rate. The details of cell design, the test program, and the results obtained are described
Chemical analysis of charged Li/SO(sub)2 cells
The initial focus of the program was to confirm that charging can indeed result in explosions and constitute a significant safety problem. Results of this initial effort clearly demonstrated that cells do indeed explode on charge and that charging does indeed constitute a real and severe safety problem. The results of the effort to identify the chemical reactions involved in and responsible for the observed behavior are described
Pressure induced electronic topological transition in Sb2S3
Pressure induced electronic topological transitions in the wide band gap
semiconductor Sb2S3 (Eg = 1.7-1.8 eV) with similar crystal symmetry (SG: Pnma)
to its illustrious analog, Sb2Se3, has been studied using Raman spectroscopy,
resistivity and the available literature on the x-ray diffraction studies. In
this report, the vibrational and the transport properties of Sb2S3 have been
studied up to 22 GPa and 11 GPa, respectively. We observed the softening of
phonon modes Ag(2), Ag(3) and B2g and a sharp anomaly in their line widths at 4
GPa. The resistivity studies also shows an anomaly around this pressure. The
changes in resistivity as well as Raman line widths can be ascribed to the
changes in the topology of the Fermi surface which induces the electron-phonon
and the strong phonon-phonon coupling, indicating a clear evidence of the
electronic topological transition (ETT) in Sb2S3. The pressure dependence of
a/c ratio plot obtained from the literature showed a minimum at ~ 5 GPa, which
is consistent with our high pressure Raman and resistivity results. Finally, we
give the plausible reasons for the non-existence of a non-trivial topological
state in Sb2S3 at high pressures.Comment: 24 pages, 6 Figures, 2 tables submitted for publicatio
Primary Antibody Responses to Thymus-Independent Antigens in the Lungs and Hilar Lymph Nodes of Mice
B lymphocytes from the pulmonary lymphoid tissues were stimulated with a variety of thymus-independent (TI) antigens by intratracheal (i.t.) immunization. Immune responses in the lungs and hilar lymph nodes (HLN), which are part of the localized lymphoid tissue, as well as in the spleen, the systemic lymphoid organ, were studied. Thus, primary i.t. immunization of mice with the TI-1 antigen trinitrophenyl-lipopolysaccharide (TNP-LPS) elicited both antigen-specific and polyclonal plaque-forming cell responses from HLN, lung, and splenic B lymphocytes. These responses appeared as early as 3 days after immunization and declined by day 7. Similar immunization with another TI-1 antigen, TNP-Brucella abortus, resulted in anti-TNP responses in both pulmonary and systemic lymphoid tissues, although the kinetics of the antibody response were different than those to TNP-LPS. Interestingly an i.t. immunization with a TI-2 antigen, TNP-Ficoll, failed to induce an anti-TNP PFC response from HLN and lung B cells, although there was good antibody formation from splenic B cells. Antibody response to TNP-Ficoll was restored in pulmonary tissues when mice were immunized with TNP-Ficoll mixed with unconjugated B. abortus. In conclusion, our results indicate that TI-1 and TI-2 antigens differ in their ability to induce antibody responses in the pulmonary lymphoid tissues. The inability of TNP-Ficoll to elicit an antibody response in pulmonary lymphoid tissues has significance in the development of vaccines containing bacterial polysaccharides
- …