4,139 research outputs found
Lead-tellurium oxysalts from Otto Mountain near Baker, California: IV. Markcooperite, Pb(UO_2)Te^(6+)O_6, the first natural uranyl tellurate
Markcooperite, Pb_2(UO_2)Te^(6+)O_6, is a new tellurate from Otto Mountain near Baker, California, named in honor of Mark A. Cooper of the University of Manitoba for his contributions to mineralogy. The new mineral occurs on fracture surfaces and in small vugs in brecciated quartz veins. Markcooperite is directly associated with bromian chlorargyrite, iodargyrite, khinite-4O, wulfenite, and four other new tellurates: housleyite, thorneite, ottoite, and timroseite. Various other secondary minerals occur in the veins, including two other new secondary tellurium minerals: paratimroseite and telluroperite. Markcooperite is monoclinic, space group P2_1/c, a = 5.722(2), b = 7.7478(2), c = 7.889(2) Å, β = 90.833(5)°, V = 349.7(2) Å^3, and Z = 2. It occurs as pseudotetragonal prisms to 0.2 mm with the forms {100} and {011} and as botryoidal intergrowths to 0.3 mm in diameter; no twinning was observed. Markcooperite is orange and transparent, with a light orange streak and adamantine luster, and is non-fluorescent. Mohs hardness is estimated at 3. The mineral is brittle, with an irregular fracture and perfect {100} cleavage. The calculated density is 8.496 g/cm3 based on the empirical formula. Markcooperite is biaxial (+), with indices of refraction α= 2.11, β = 2.12, γ= 2.29 calculated using the Gladstone-Dale relationship, measured α-β birefringence of 0.01 and measured 2V of 30(5)°. The optical orientation is X = c, Y = b, Z = a. The mineral is slightly pleochroic in shades of orange, with absorption: X > Y = Z. No dispersion was observed. Electron microprobe analysis provided PbO 50.07, TeO_3 22.64, UO_3 25.01, Cl 0.03, O≡Cl –0.01, total 97.74 wt%; the empirical formula (based on O+Cl = 8) is Pb_(2.05)U_(0.80)Te^(6+)_(1.18)O_(7.99)Cl_(0.01). The strongest powder X-ray diffraction lines are [d_(obs) in Å (hkl) I]: 3.235 (120, 102, 1[overbar]02) 100, 2.873 (200) 40, 2.985 (1[overbar]21, 112, 121) 37, 2.774 (022) 30, 3.501 (021, 012) 29, 2.220 (221, 2[overbar]21, 212) 23, 1.990 (222, 2[overbar]22) 21, and 1.715 (320) 22. The crystal structure (R_1 = 0.052) is based on sheets of corner-sharing uranyl square bipyramids and tellurate octahedra, with Pb atoms between the sheets. Markcooperite is the first compound to show Te^(6+) substitution for U^(6+) within the same crystallographic site. Markcooperite is structurally related to synthetic Pb(UO_2)O_2
Lead-tellurium oxysalts from Otto Mountain near Baker, California: V. Timroseite, Pb_2Cu_5^(2+)(Te^(6+)O_6)_2(OH)_2, and paratimroseite, Pb_2Cu_4^(2+)(Te^(6+)O_6)_2(H_2O)_2, two new tellurates with Te-Cu polyhedral sheets
Timroseite, Pb_2Cu_5^(2+)(Te^(6+)O_6)_2(OH)_2, and paratimroseite, Pb_2Cu_4^(2+)(Te^(6+)O_6)_2(H_2O)_2, are two new tellurates from Otto Mountain near Baker, California. Timroseite is named in honor of Timothy (Tim) P. Rose and paratimroseite is named for its relationship to timroseite. Both new minerals occur on fracture surfaces and in small vugs in brecciated quartz veins. Timroseite is directly associated with acanthite, cerussite, bromine-rich chlorargyrite, chrysocolla, gold, housleyite, iodargyrite, khinite-4O, markcooperite, ottoite, paratimroseite, thorneite, vauquelinite, and wulfenite. Paratimroseite is directly associated with calcite, cerussite, housleyite, khinite-4O, markcooperite, and timroseite. Timroseite is orthorhombic, space group P2_1nm, a = 5.2000(2), b = 9.6225(4), c = 11.5340(5) Å, V = 577.13(4) Å^3, and Z = 2. Paratimroseite is orthorhombic, space group P2_12_12_1, a = 5.1943(4), b = 9.6198(10), c = 11.6746(11) Å, V = 583.35(9) Å^3, and Z = 2. Timroseite commonly occurs as olive to lime green, irregular, rounded masses and rarely in crystals as dark olive green, equant rhombs, and diamond-shaped plates in subparallel sheaf-like aggregates. It has a very pale yellowish green streak, dull to adamantine luster, a hardness of about 2 1/2 (Mohs), brittle tenacity, irregular fracture, no cleavage, and a calculated density of 6.981 g/cm^3. Paratimroseite occurs as vibrant "neon" green blades typically intergrown in irregular clusters and as lime green botryoids. It has a very pale green streak, dull to adamantine luster, a hardness of about 3 (Mohs), brittle tenacity, irregular fracture, good {001} cleavage, and a calculated density of 6.556 g/cm^3. Timroseite is biaxial (+) with a large 2V, indices of refraction > 2, orientation X = b, Y = a, Z = c and pleochroism: X = greenish yellow, Y = yellowish green, Z = dark green (Z > Y > X). Paratimroseite is biaxial (–) with a large 2V, indices of refraction > 2, orientation X = c, Y = b, Z = a and pleochroism: X = light green, Y = green, Z = green (Y = Z >> X). Electron microprobe analysis of timroseite provided PbO 35.85, CuO 29.57, TeO_3 27.75, Cl 0.04, H_2O 1.38 (structure), O≡Cl –0.01, total 94.58 wt%; the empirical formula (based on O+Cl = 14) is Pb_(2.07) Cu^(2+)_(4.80)Te^(6+)_(2.04)O_(12)(OH)_(1.98)Cl_(0.02). Electron microprobe analysis of paratimroseite provided PbO 36.11, CuO 26.27, TeO_3 29.80, Cl 0.04, H_2O 3.01 (structure), O≡Cl –0.01, total 95.22 wt%; the empirical formula (based on O+Cl = 14) is Pb_(1.94)Cu^(2+)_(3.96)Te^(6+)_(2.03)O_(12)(H_2O)_(1.99)Cl_(0.01). The strongest powder X-ray diffraction lines for timroseite are [d_(obs) in Å (hkl) I]: 3.693 (022) 43, 3.578 (112) 44, 3.008 (023) 84, 2.950 (113) 88, 2.732 (130) 100, 1.785 (multiple) 33, 1.475 (332) 36; and for paratimroseite 4.771 (101) 76, 4.463 (021) 32, 3.544 (120) 44, 3.029 (023,122) 100, 2.973 (113) 48, 2.665 (131) 41, 2.469 (114) 40, 2.246 (221) 34. The crystal structures of timroseite (R_1 = 0.029) and paratimroseite (R_1 = 0.039) are very closely related. The structures are based upon edge- and corner-sharing sheets of Te and Cu polyhedra parallel to (001) and the sheets in both structures are identical in topology and virtually identical in geometry. In timroseite, the sheets are joined to one another along c by sharing the apical O atoms of Cu octahedra, as well as by sharing edges and corners with an additional CuO_5 square pyramid located between the sheets. The sheets in paratimroseite are joined only via Pb-O and H bonds
Lead-tellurium oxysalts from Otto Mountain near Baker, California: VI. Telluroperite, Pb_3Te^(4+)O_4Cl_2, the Te analog of perite and nadorite
Telluroperite, Pb_3Te^(4+)O_4Cl_2, is a new tellurite from Otto Mountain near Baker, California. The new mineral occurs on fracture surfaces and in small vugs in brecciated quartz veins in direct association with acanthite, bromine-rich chlorargyrite, caledonite, cerussite, galena, goethite, and linarite. Various other secondary minerals occur in the veins, including six new tellurates, housleyite, markcooperite, paratimroseite, ottoite, thorneite, and timroseite. Telluroperite is orthorhombic, space group Bmmb, a = 5.5649(6), b = 5.5565(6), c = 12.4750(14) Å, V = 386.37(7) Å^3, and Z = 2. The new mineral occurs as rounded square tablets and flakes up to 0.25 mm on edge and 0.02 mm thick. The form {001} is prominent and is probably bounded by {100}, {010}, and {110}. It is bluish-green and transparent, with a pale bluish-green streak and adamantine luster. The mineral is non-fluorescent. Mohs hardness is estimated to be between 2 and 3. The mineral is brittle, with a curved fracture and perfect {001} cleavage. The calculated density based on the empirical formula is 7.323 g/cm^3. Telluroperite is biaxial (–), with very small 2V (~10°). The average index of refraction is 2.219 calculated by the Gladstone-Dale relationship. The optical orientation is X = c and the mineral exhibits moderate bluish-green pleochrosim; absorption: X < Y = Z. Electron microprobe analysis provided PbO 72.70, TeO_2 19.26, Cl 9.44, O≡Cl –2.31, total 99.27 wt%. The empirical formula (based on O+Cl = 6) is Pb_(2.79)Te_(1.03)^(4+)O_(3.72)Cl_(2.28). The six strongest powder X-ray diffraction lines are [d_(obs) in Å (hkl) I]: 3.750 (111) 58, 2.857 (113) 100, 2.781 (020, 200) 43, 2.075 (024, 204) 31, 1.966 (220) 30, and 1.620 (117, 313, 133) 52. The crystal structure (R_1 = 0.056) is based on the Sillén X_1 structure-type and consists of a three-dimensional structural topology with lead-oxide halide polyhedra linked to tellurium/lead oxide groups. The mineral is named for the relationship to perite and the dominance of Te (with Pb) in the Bi site of perite
Oliveros Virus: A Novel Arenavirus from Argentina
AbstractDuring the past few decades several newly recognized rodent-borne arenaviruses have been shown to be associated with severe hemorrhagic fever cases in South America. Changes in ecology and farming practices throughout the region have increased the concern over the potential public health threat posed by such emerging virus diseases. Oliveros (OLV) virus is a recently discovered arenavirus of the rodentBolomys obscurusin Argentina. Genetic analysis of the small genomic RNA segment, which encodes the nucleocapsid protein and the envelope glycoproteins, shows that Oliveros is a novel, phylogenetically distinct member of theArenaviridaefamily which differs in nucleotide sequence from the previously characterized members by approximately 35% or more. Despite this level of diversity, OLV virus possesses the same ambisense genome structure and many overall RNA and protein features in common with other arenaviruses. These data represent an important first step in the development of specific immunological and PCR diagnostic reagents to allow assessment of the prevalence and disease potential of this virus
New compositional and structural data validate the status of jamborite
Jamborite was originally described with the formula (Ni2+,Ni3+,Fe)(OH)2(OH,S,H2O) from Ca' de' Ladri and Monteacuto Ragazza near Bologna, and Castelluccio di Moscheda near Modena, Italy. Re-examination of the mineral from the type localities and Rio Vesale, Sestola, Val Panaro (Emilia-Romagna, Italy), led to the discovery of a crystal suitable for study by single-crystal and powder X-ray diffraction, SEM-EDS, and Raman spectroscopy. Jamborite crystallizes in the space group REmbedded Imagem, with the unit-cell parameters a 3.068(4) Å, c 23.298(11) Å, and Z = 3. The structure refinement (R1 = 0.0818) showed that jamborite contains brucite-like sheets of edge-sharing octahedra (Ni2+,M3+)(O,OH)6 with a distinctive double layer of partially occupied H2O molecules between them. Raman data indicate that the sulfur is present as sulfate rather than sulfide. The new analytical data were recalculated on the basis of 1 (Ni+Ca+Co+Fe) to give the formula [(Ni2+0.902Ca2+0.002)(Co3+0.072Fe3+0.024)]Σ1.000(OH)1.884Cl0.012(H2O)0.004(SO4)0.100·0.900H2O. The sulfur occupancy was too low to be located in the refinement, but the ≈1:1 ratio of M3+:S from the chemical analysis implies that SO42− replaces OH− in the brucite sheet rather than sitting in the interlayer space. The splitting of the H2O layer allows avoidance of short SO42−···H2O distances. Thus, jamborite is not a member of the hydrotalcite supergroup. Jamborite is redefined as M2+1−xM3+x(OH)2−x(SO4)x·nH2O, where M2+ is dominantly Ni, M3+ is dominantly Co, x ≤ 1/3 and probably ≤ 1/7 (x = 0.10 for the neotype sample), and n < (1−x). The low M3+/M2+ ratio relative to honessite and hydrohonessite and high Co content may explain the rarity of jamborite as an early alteration product of millerite. The redefinition of jamborite and designation of the neotype specimen from Rio Vesale have been approved by the Commission on New Minerals, Nomenclature and Classification (CNMNC), voting proposal 14-E
Effect of lone-pair stereoactivity on polyhedral volume and structural flexibility: Application to TeIVO6 octahedra
The Distortion Theorem implies that the irregularity of bond distances in a distorted coordination polyhedron causes an increase of mean bond distance. Examination of 40 polyhedra containing the lone-pair cation Te shows that this does not imply an increase in polyhedral volume. Volumes of these polyhedra are 10.3-23.7-Å, compared with the 12.83-Å expected for a hypothetical regular octahedron. There is little correlation between volume and measures of polyhedral distortion such as quadratic elongation, bond-angle variance or vector bond valence. However, the oxygens of our polyhedra lie very close to a sphere of best fit, centred at ∼-1-Å from the Te atom. The Te-centre distance is an index of lone-pair stereoactivity and is linearly related to the radius R sph of the sphere; this is explained by a more localized lone pair repelling the anions more strongly, leading to a longer non-bonded distance between the lone pair and anions. Polyhedral volume still varies considerably for a given R sph, because the oxygen ligands may be distributed over the whole sphere surface, or confined to a small portion of it. The uniformity of this distribution can be estimated from the distance between the sphere centre and the centroid of the O6 polyhedron. Te-centre and centroid-centre distances alone then account for 95% of the variation observed in volume for polyhedra which are topologically octahedral. Six of the polyhedra studied that are outliers are closer in shape to pentagonal pyramids than octahedra. These have short distances from the central Te cation to other Te and/or to large, polarizable cations, suggesting additional weak bonding interactions between these species and the central lone pair. The flexibility of lone-pair polyhedra is further enhanced by the ability of a single polyhedron to accommodate different cations with different degrees of lone-pair activity, which facilitates more diverse solid solution behaviour than would otherwise be the case
Crystal structure and revised chemical formula for burckhardtite, Pb_2(Fe^(3+)Te^(6+))[AlSi_3O_8]O_6: a double-sheet silicate with intercalated phyllotellurate layers
The crystal structure of burckhardite from the type locality, Moctezuma, Sonora, Mexico, has been refined to R_1 = 0.0362 and wR_2 = 0.0370 for 215 reflections with I > 2σ(I). Burckhardtite is trigonal, space group P3lm, with the unit-cell parameters ɑ = 5.2566(5) Å, c = 13.0221(10) Å, V = 311.62(5) Å3 and Z = 1 for the ideal formula unit Pb_2(Fe^(3+)Te^(6+))[AlSi_3O_8]O_6. There is no long-range order of (Fe^(3+), Te^(6+)) or (Al^(3+), Si^(4+)). New microprobe data were used to estimate site scattering factors, and Raman spectroscopic data showed no evidence of O–H stretching bands. Burckhardtite is not closely related to the micas, as supposed previously, but is a double-sheet silicate in which the aluminosilicate anion resembles that of minerals such as cymrite and kampfite. The [(Fe^(3+)Te^(6+))O_6]^(3−) part of the structure is not bonded directly to the aluminosilicate layer, but forms a discrete anionic phyllotellurate layer that alternates with the [AlSi_3O_8]^− double sheets. Similar phyllotellurate layers are known from several synthetic phases. In burckhardtite, Pb^(2+) cations intercalate between phyllosilicate and phyllotellurate layers, forming a Pb_2[FeTeO_6] module that is topologically similar to a slab of the structure of rosiaite, Pb[Sb_2O_6]. The crystal symmetry, structure, classification as a double-sheet silicate and chemical formula, including the determination of the 6+ valence of Te and absence of essential H_2O, are all new findings for the mineral
Lead-tellurium oxysalts from Otto Mountain near Baker, California, USA: XII. Andychristyite, PbCu^(2+)Te^(6+)O_5(H_2O), a new mineral with hcp stair-step layers
Andychristyite, PbCu^(2+)Te^(6+)O_5(H_2O), is a new tellurate mineral from Otto Mountain near Baker, California, USA. It occurs in vugs in quartz in association with timroseite. It is interpreted as having formed from the partial oxidation of primary sulfides and tellurides during or following brecciation of quartz veins. Andychristyite is triclinic, space group P1, with unit-cell dimensions a = 5.322(3), b = 7.098(4), c = 7.511(4) Å, α = 83.486(7), β = 76.279(5), γ = 70.742(5)°, V = 260.0(2) Å^3 and Z = 2. It forms as small tabular crystals up to ∼50 µm across, in sub-parallel aggregates. The colour is bluish green and the streak is very pale bluish green. Crystals are transparent with adamantine lustre. The Mohs hardness is estimated at between 2 and 3. Andychristyite is brittle with an irregular fracture and one perfect cleavage on {001}. The calculated density based on the empirical formula is 6.304 g/cm^3. The mineral is optically biaxial, with large 2V, strong dispersion, and moderate very pale blue-green to medium blue-green pleochroism. The electron microprobe analyses (average of five) provided: PbO 43.21, CuO 15.38, TeO_3 35.29, H_2O 3.49 (structure), total 97.37 wt.%. The empirical formula (based on 6 O apfu) is: Pb_(0.98)C u^(2+)_(0.98)Te^(6+)_(1.02)O_6H_(1.96). The Raman spectrum exhibits prominent features consistent with the mineral being a tellurate, as well as an OH stretching feature confirming a hydrous component. The eight strongest powder X-ray diffraction lines are [d_(obs) in Å(I)(hkl)]: 6.71(16)(010), 4.76(17)(110), 3.274(100)(120,102,012), 2.641(27)(102, 211, 112), 2.434(23)(multiple), 1.6736(17)(multiple), 1.5882(21)(multiple) and 1.5133(15)(multiple). The crystal structure of andychristyite (R_1 = 0.0165 for 1511 reflections with Fo > 4σF) consists of stair-step-like hcp polyhedral layers of Te^(6+)O_6 and Cu^(2+)O_6 octahedra parallel to {001}, which are linked in the [001] direction by bonds to interlayer Pb atoms. The structures of eckhardite, bairdite, timroseite and paratimroseite also contain stair-step-like hcp polyhedral layers
- …