40 research outputs found
Planar Laser Imaging of Sprays for Liquid Rocket Studies
A planar laser imaging technique which incorporates an optical polarization ratio technique for droplet size measurement was studied. A series of pressure atomized water sprays were studied with this technique and compared with measurements obtained using a Phase Doppler Particle Analyzer. In particular, the effects of assuming a logarithmic normal distribution function for the droplet size distribution within a spray was evaluated. Reasonable agreement between the instrument was obtained for the geometric mean diameter of the droplet distribution. However, comparisons based on the Sauter mean diameter show larger discrepancies, essentially because of uncertainties in the appropriate standard deviation to be applied for the polarization ratio technique. Comparisons were also made between single laser pulse (temporally resolved) measurements with multiple laser pulse visualizations of the spray
Recommended from our members
Stability Regimes of Turbulent Nitrogen-Diluted Hydrogen Jet Flames
One option for combustion in zero-emission Integrated Gasification Combined Cycle (IGCC) power plants is non-premixed combustion of nitrogen-diluted hydrogen in air. An important aspect to non-premixed combustion is flame stability or anchoring, though only a few fundamental stability studies of these flames have taken place to date. The following paper presents the results of experiments investigating the effects of nitrogen diluent fraction, jet diameter, and exit velocity on the static stability limits of a turbulent hydrogen jet flame issuing from a thin-lipped tube into a quiescent atmosphere. Four different stability limits are observed: detachment from the burner lip, reattachment to the burner lip, transition from a laminar lifted flame base to blowout or to a turbulent lifted flame, and transition from a turbulent lifted flame to blowout. The applicability of existing theories and correlations to the stability results is discussed. These results are an important step in assessing the viability of a non-premixed combustion approach using hydrogen diluted with nitrogen as a fuel
Recommended from our members
Status of the Solid State Energy Conversion Alliance Program
Global NOx Measurements in Turbulent Nitrogen-Diluted Hydrogen Jet Flames
Turbulent hydrogen diffusion flames diluted with nitrogen are currently being studied to assess their ability to achieve the DOE Turbine Program's aggressive emissions goal of 2 ppm NOx in a hydrogen-fueled IGCC gas turbine combustor. Since the unstrained adiabatic flame temperatures of these diluted flames are not low enough to eliminate thermal NOx formation, the focus of the current work is to study how the effects of flame residence time and global flame strain can be used to help achieve the stated NOx emissions goal. Dry NOx measurements are presented as a function of jet diameter, nitrogen dilution, and jet velocity for a turbulent hydrogen/nitrogen jet issuing from a thin-lipped tube in an atmospheric pressure combustor. The NOx emission indices from these experiments are normalized by the flame residence time to ascertain the effects of global flame strain and fuel Lewis Number on the NOx emissions. In addition, dilute hydrogen diffusion flame experiments were performed in a high-pressure combustor at 2, 4 and 8 atm. The NOx emission data from these experiments are discussed, as well as the results from onedimensional flame calculations
Effects Of Coaxial Air On Nitrogen-Diluted Hydrogen Jet Diffusion Flame Length And NoX Emission
Turbulent nitrogen-diluted hydrogen jet diffusion flames with high velocity coaxial air flows are investigated for their NOx emission levels. This study is motivated by the DOE Turbine program\u27s goal of achieving 2 ppm NOx from gas turbine combustors running on diluted high-hydrogen fuels. In this study, effects of coaxial air velocity and momentum are varied while maintaining low overall equivalence ratios to eliminate the effects of combustion product recirculation on flame lengths, flame temperatures, and resulting NOx emission levels. The nature of flame length and NO x emission scaling relationships are found to vary, depending on whether the combined fuel and coaxial air jet is fuel-rich or fuel-lean. In the absence of differential diffusion effects, flame lengths agree well with predicted trends, and NOx emissions levels decrease with increasing coaxial air velocity, as expected. Normalizing the NOx emission index with a flame residence time reveals that a global flame strain based on the difference between the fuel and coaxial air velocities is not a viable scaling parameter, as has traditionally been used. A new scaling relationship that accounts for enhanced mixing via flame length reduction is found to provide an excellent collapse of the data with the correct Damköhler number scaling. © 2010 The Combustion Institute. Published by Elsevier Inc. All rights reserved
Effects Of Coaxial Air On Nitrogen-Diluted Hydrogen Jet Diffusion Flame Length And NoX Emission
Turbulent nitrogen-diluted hydrogen jet diffusion flames with high velocity coaxial air flows are investigated for their NOx emission levels. This study is motivated by the DOE turbine program\u27s goal of achieving 2 ppm dry low NOx from turbine combustors running on nitrogen-diluted highhydrogen fuels. In this study, effects of coaxial air velocity and momentum are varied while maintaining low overall equivalence ratios to eliminate the effects of recirculation of combustion products on flame lengths, flame temperatures, and resulting NOx emission levels. The nature of flame length and NOx emission scaling relationships are found to vary, depending on whether the combined fuel and coaxial air jet is fuel-rich or fuel-lean. In the absence of differential diffusion effects, flame lengths agree well with predicted trends, and NOx emissions levels are shown to decrease with increasing coaxial air velocity, as expected. Normalizing the NOx emission index with a flame residence time reveals some interesting trends, and indicates that a global flame strain based on the difference between the fuel and coaxial air velocities, as is traditionally used, is not a viable parameter for scaling the normalized NOx emissions of coaxial air jet diffusion flames
Mixing Characteristics of Coaxial Injectors at High Gas to Liquid Momentum Ratios
A study of the spray of a swirl coaxial gas-liquid injector operating at high gas to liquid momentum ratios is reported. Mixing and droplet size characteristics of the swirl injector are also compared to a shear coaxial injector, currently being used in the Space Shuttle Main Engine fuel preburner. The injectors were tested at elevated chamber pressures using water as a LOX simulant and nitrogen and helium as gaseous hydrogen simulants. The elevated chamber pressure allowed for matching of several of the preburner injector conditions including; gas to liquid momentum ratio, density ratio and Mach number. Diagnostic techniques used to characterize the spray included; strobe back-light imaging, laser sheet spray imaging, mechanical patternation, and a phase Doppler interferometry. Results thus far indicate that the radial spreading of the swirl coaxial spray is much less than was reported in previous studies of swirl injectors operating at atmospheric back-pressure. The swirl coaxial spray does, however, exhibit a smaller overall droplet size which may be interpreted as an increase in local mixing
Investigation of Film Cooling Efficiency in a High Pressure Subscale LOX/H2 Combustion Chamber
Film cooling performance in a LOX/H2 subscale combustion chamber was investigated. This paper presents both a new test specimen and measurement technique, developed and
successfully tested by the Institute of Space Propulsion, as well as experimental results. The new measurement method provides detailed information about the cooling film efficiency
and thermal load distribution on the hot inner surfaces at real rocket engine conditions and pressures up to 11.5 MPa. The presented investigations have been performed at the European Research and Technology Test Facility