36,250 research outputs found
Experimental study of coaxial nozzle exhaust noise
Experimental results are presented for static acoustic model tests of various geometrical configurations of coaxial nozzles operating over a range of flow conditions. The geometrical configurations consisted of nozzles with coplanar and non-coplanar exit planes and various exhaust area ratios. Primary and secondary nozzle flows were varied independently over a range of nozzle pressure ratios from 1.4 to 3.0 and gas temperatures from 280 to 1100 K. Acoustic data are presented for the conventional mode of coaxial nozzle operation as well as for the inverted velocity profile mode. Comparisons are presented to show the effect of configuration and flow changes on the acoustic characteristics of the nozzles
Measurement of sigma_Total in e+e- Annihilations Below 10.56 GeV
Using the CLEO III detector, we measure absolute cross sections for e+e- ->
hadrons at seven center-of-mass energies between 6.964 and 10.538 GeV. R, the
ratio of hadronic and muon pair production cross sections, is measured at these
energies with a r.m.s. error <2% allowing determinations of the strong coupling
alpha_s. Using the expected evolution of alpha_s with energy we find
alpha_s(M_Z^2)=0.126 +/- 0.005 ^{+0.015}_{-0.011}, and
Lambda=0.31^{+0.09+0.29}_{-0.08-0.21}.Comment: Comments: Presented at "The 2007 Europhysics Conference on High
Energy Physics," Manchester, England, 19-25 July 2007, to appear in the
proceedings. Three pages, 1 figur
The thinking line: defining drawing
Curated exhibition of works from the British Council collection alongside Canterbury Christ Church university staff and alumni
Techniques for the realization of ultrareliable spaceborne computers Interim scientific report
Reliability tests on spaceborne digital computer
Effects of forward velocity on noise for a J85 turbojet engine with multitube suppressor from wind tunnel and flight tests
Flight and wind tunnel noise tests were conducted using a J85 turbojet engine as a part of comprehensive programs to obtain an understanding of forward velocity effects on jet exhaust noise. Nozzle configurations of primary interest were a 104-tube suppressor with and without an acoustically-treated shroud. The installed configuration of the engine was as similar as possible in the flight and wind tunnel tests. Exact simultaneous matching of engine speed, exhaust velocity, and exhaust temperature was not possible, and the wind tunnel maximum Mach number was approximately 0.27, while the flight Mach number was approximately 0.37. The nominal jet velocity range was 450 to 640 m/sec. For both experiments, background noise limited the jet velocity range for which significant data could be obtained. In the present tests the observed directivity and forward velocity effects for the suppressor are more similar to predicted trends for internally-generated noise than unsuppressed jet noise
A fuselage/tank structure study for actively cooled hypersonic cruise vehicles, summary
A detailed analytical study was made to investigate the effects of fuselage cross section (circular and elliptical) and the structural arrangement (integral and nonintegral tanks) on aircraft performance. The vehicle was a 200 passenger, liquid hydrogen fueled Mach 6 transport designed to meet a range goal of 9.26 Mn (5000 NM). A variety of trade studies were conducted in the area of configuration arrangement, structural design, and active cooling design in order to maximize the performance of each of three point design aircraft: (1) circular wing-body with nonintegral tanks, (2) circular wing-body with integral tanks and (3) elliptical blended wing-body with integral tanks. Aircraft range and weight were used as the basis for comparison. The resulting design and performance characteristics show that the blended body integral tank aircraft weights the least and has the greatest range capability, however, producibility and maintainability factors favor nonintegral tank concepts
Forced-flow once-through boilers
A compilation and review of NASA-sponsored research on boilers for use in spacecraft electrical power generation systems is presented. Emphasis is on the heat-transfer and fluid-flow problems. In addition to space applications, much of the boiler technology is applicable to terrestrial and marine uses such as vehicular power, electrical power generation, vapor generation, and heating and cooling. Related research areas are discussed such as condensation, cavitation, line and boiler dynamics, the SNAP-8 project (Mercury-Rankine cycle), and conventional terrestrial boilers (either supercritical or gravity-assisted liquid-vapor separation types). The research effort was directed at developing the technology for once-through compact boilers with high heat fluxes to generate dry vapor stably, without utilizing gravity for phase separations. A background section that discusses, tutorially, the complex aspects of the boiling process is presented. Discussions of tests on alkali metals are interspersed with those on water and other fluids on a phenomenological basis
Quasi-Chemical and Structural Analysis of Polarizable Anion Hydration
Quasi-chemical theory is utilized to analyze the roles of solute polarization
and size in determining the structure and thermodynamics of bulk anion
hydration for the Hofmeister series Cl, Br, and I. Excellent
agreement with experiment is obtained for whole salt hydration free energies
using the polarizable AMOEBA force field. The quasi-chemical approach exactly
partitions the solvation free energy into inner-shell, outer-shell packing, and
outer-shell long-ranged contributions by means of a hard-sphere condition.
Small conditioning radii, even well inside the first maximum of the
ion-water(oxygen) radial distribution function, result in Gaussian behavior for
the long-ranged contribution that dominates the ion hydration free energy. The
spatial partitioning allows for a mean-field treatment of the long-ranged
contribution, leading to a natural division into first-order electrostatic,
induction, and van der Waals terms. The induction piece exhibits the strongest
ion polarizability dependence, while the larger-magnitude first-order
electrostatic piece yields an opposing but weaker polarizability dependence. In
addition, a structural analysis is performed to examine the solvation
anisotropy around the anions. As opposed to the hydration free energies, the
solvation anisotropy depends more on ion polarizability than on ion size:
increased polarizability leads to increased anisotropy. The water dipole
moments near the ion are similar in magnitude to bulk water, while the ion
dipole moments are found to be significantly larger than those observed in
quantum mechanical studies. Possible impacts of the observed over-polarization
of the ions on simulated anion surface segregation are discussed.Comment: slight revision, in press at J. Chem. Phy
- …