Stability of Schottky and Ohmic Au Nanocatalysts to ZnO Nanowires

Manufacturable nanodevices must now be the predominant goal of nanotechnological research to ensure the enhanced properties of nanomaterials can be fully exploited and fulfill the promise that fundamental science has exposed. Here, we test the electrical stability of Au nanocatalyst-ZnO nanowire contacts to determine the limits of the electrical transport properties and the metal-semiconductor interfaces. While the transport properties of as-grown Au nanocatalyst contacts to ZnO nanowires have been well-defined, the stability of the interfaces over lengthy time periods and the electrical limits of the ohmic or Schottky function have not been studied. In this work, we use a recently developed iterative analytical process that directly correlates multiprobe transport measurements with subsequent aberration-corrected scanning transmission electron microscopy to study the electrical, structural, and chemical properties when the nanowires are pushed to their electrical limits and show structural changes occur at the metal-nanowire interface or at the nanowire midshaft. The ohmic contacts exhibit enhanced quantum-mechanical edge-tunneling transport behavior because of additional native semiconductor material at the contact edge due to a strong metal-support interaction. The low-resistance nature of the ohmic contacts leads to catastrophic breakdown at the middle of the nanowire span where the maximum heating effect occurs. Schottky-type Au-nanowire contacts are observed when the nanowires are in the as-grown pristine state and display entirely different breakdown characteristics. The higher-resistance rectifying I-V behavior degrades as the current is increased which leads to a permanent weakening of the rectifying effect and atomic-scale structural changes at the edge of the Au interface where the tunneling current is concentrated. Furthermore, to study modified nanowires such as might be used in devices the nanoscale tunneling path at the interface edge of the ohmic nanowire contacts is removed with a simple etch treatment and the nanowires show similar I-V characteristics during breakdown as the Schottky pristine contacts. Breakdown is shown to occur either at the nanowire midshaft or at the Au contact depending on the initial conductivity of the Au contact interface. These results demonstrate the Au-nanowire structures are capable of withstanding long periods of electrical stress and are stable at high current densities ensuring they are ideal components for nanowire-device designs while providing the flexibility of choosing the electrical transport properties which other Au-nanowire systems cannot presently deliver

Modifying the Interface Edge to Control the Electrical Transport Properties of Nanocontacts to Nanowires

Selecting the electrical properties of nanomaterials is essential if their potential as manufacturable devices is to be reached. Here, we show that the addition or removal of native semiconductor material at the edge of a nanocontact can be used to determine the electrical transport properties of metal-nanowire interfaces. While the transport properties of as-grown Au nanocatalyst contacts to semiconductor nanowires are well-studied, there are few techniques that have been explored to modify the electrical behavior. In this work, we use an iterative analytical process that directly correlates multiprobe transport measurements with subsequent aberration-corrected scanning transmission electron microscopy to study the effects of chemical processes that create structural changes at the contact interface edge. A strong metal-support interaction that encapsulates the Au nanocontacts over time, adding ZnO material to the edge region, gives rise to ohmic transport behavior due to the enhanced quantum-mechanical tunneling path. Removal of the extraneous material at the Au-nanowire interface eliminates the edge-tunneling path, producing a range of transport behavior that is dependent on the final interface quality. These results demonstrate chemically driven processes that can be factored into nanowire-device design to select the final properties

Surface sensitivity of four-probe STM resistivity measurements of bulk ZnO correlated to XPS

Multi-probe instruments based on scanning tunnelling microscopy (STM) are becoming increasingly common for their ability to perform nano- to atomic-scale investigations of nanostructures, surfaces and in situ reactions. A common configuration is the four-probe STM often coupled with in situ scanning electron microscopy (SEM) that allows precise positioning of the probes onto surfaces and nanostructures enabling electrical and scanning experiments to be performed on highly localised regions of the sample. In this paper, we assess the sensitivity of four-probe STM for in-line resistivity measurements of the bulk ZnO surface. The measurements allow comparisons to established models that are used to relate light plasma treatments (O and H) of the surfaces to the resistivity measurements. The results are correlated to x-ray photoelectron spectroscopy (XPS) and show that four-probe STM can detect changes in surface and bulk conduction mechanisms that are beyond conventional monochromatic XPS

Enhanced Long-Path Electrical Conduction in ZnO Nanowire Array Devices Grown via Defect-Driven Nucleation

Vertical arrays of nanostructures have been widely used as major components in some of the most ground-breaking modern research-based devices, and ZnO nanowires have received particular attention because of their favorable electronic properties. Using a local multiprobe technique to measure the properties of individual ZnO nanowires in vertical arrays, we show for the first time that for metal-catalyzed ZnO nanowire growth the electrical contribution of individual wires to a device is highly dependent on the fate of the catalyst nanoparticle during growth. To overcome the limitations of metal-catalyzed growth, nanowires grown from a defect-driven nucleation process are shown to provide high-quality device structures with excellent long-path electrical conduction

Photo-Induced Unpinning of Fermi Level in WO3

Atomic force and high resolution scanning tunneling analyses were carried out onnanostructured WO3 films. It turned out that the band gap measured by scanning tunnelingspectroscopy at surface is lower than the band gap reported in the literature. This effect isattributed to the high density of surface states in this material, which allows tunneling intothese states. Such a high density of surface states pins the Fermi level resulting in modestsurface activity at room temperature. Photo activation of WO3 results in unpinning of theFermi level and thereby in higher chemical activity at surface

Surface state modulation through wet chemical treatment as a route to controlling the electrical properties of ZnO nanowire arrays investigated with XPS

ZnO is a wide bandgap semiconductor that has many potential applications including solar cell electrodes, transparent thin film transistors and gas/biological sensors. Since the surfaces of ZnO materials have no amorphous or oxidised layers, they are very environmentally sensitive, making control of their semiconductor properties challenging. In particular, the electronic properties of ZnO nanostructures are dominated by surface effects while surface conduction layers have been observed in thin films and bulk crystals. Therefore, the ability to use the ZnO materials in a controlled way depends on the development of simple techniques to modulate their surface electronic properties. Here, we use monochromatic x-ray photoelectron spectroscopy (XPS) to investigate the use of different wet chemical treatments (EtOH, H2O2) to control the electronic properties of ZnO nanowires by modulating the surface depletion region. The valence band and core level XPS spectra are used to explore the relationship between the surface chemistry of the nanowires and the surface band bending