12 research outputs found
Recommended from our members
The Synthesis and Structure of a Scandium Nitrate Hydroxy-Bridged Dimeric Complex Supported by Bipyridyl Ligands.
The current discussion on whether scandium, yttrium and lanthanum should represent Group 3 in the Periodic Table or whether lutetium should replace lanthanum in the group has prompted us to further explore the structural chemistry of the Group 3 elements and compare the coordination numbers and coordination geometries adopted. The steric and electronic properties of the coordinated ligands have a major influence on the structures adopted. We report the synthesis and crystal structure determination of an unusual dinuclear scandium complex [(bipy)(NO3)2Sc(µ-OH)2Sc(NO3)2(bipy)] obtained by the reaction of hydrated scandium nitrate with 2,2'-bipyridyl (bipy) in either ethanol or nitromethane. The crystal structure of the complex shows that the scandium centers are eight coordinate, and the structure obtained contrasts with related complexes found in the lanthanide series [Ln(bipy)2(NO3)3] and [Ln(phen)2(NO3)3] (phen = phenanthroline) and in [M(terpy)(NO3)3] (M = Sc, Er-Lu), where these complexes are all mononuclear
The Synthesis and Structure of a Scandium Nitrate Hydroxy-Bridged Dimeric Complex Supported by Bipyridyl Ligands
The current discussion on whether scandium, yttrium and lanthanum should represent Group 3 in the Periodic Table or whether lutetium should replace lanthanum in the group has prompted us to further explore the structural chemistry of the Group 3 elements and compare the coordination numbers and coordination geometries adopted. The steric and electronic properties of the coordinated ligands have a major influence on the structures adopted. We report the synthesis and crystal structure determination of an unusual dinuclear scandium complex [(bipy)(NO(3))(2)Sc(µ-OH)(2)Sc(NO(3))(2)(bipy)] obtained by the reaction of hydrated scandium nitrate with 2,2′-bipyridyl (bipy) in either ethanol or nitromethane. The crystal structure of the complex shows that the scandium centers are eight coordinate, and the structure obtained contrasts with related complexes found in the lanthanide series [Ln(bipy)(2)(NO(3))(3)] and [Ln(phen)(2)(NO(3))(3)] (phen = phenanthroline) and in [M(terpy)(NO(3))(3)] (M = Sc, Er–Lu), where these complexes are all mononuclear
Fluorescent Detection of Carbon Disulfide by a Highly Emissive and Robust Isoreticular Series of Zr-Based Luminescent Metal Organic Frameworks (LMOFs)
Carbon disulfide (CS2) is a highly volatile neurotoxic species. It is known to cause atherosclerosis and coronary artery disease and contributes significantly to sulfur-based pollutants. Therefore, effective detection and capture of carbon disulfide represents an important aspect of research efforts for the protection of human and environmental health. In this study, we report the synthesis and characterization of two strongly luminescent and robust isoreticular metal organic frameworks (MOFs) Zr6(µ3-O)4(OH)8(tcbpe)2(H2O)4 (here termed 1) and Zr6(µ3-O)4(OH)8(tcbpe-f)2(H2O)4 (here termed 2) and their use as fluorescent sensors for the detection of carbon disulfide. Both MOFs demonstrate a calorimetric bathochromic shift in the optical bandgap and strong luminescence quenching upon exposure to carbon disulfide. The interactions between carbon disulfide and the frameworks are analyzed by in-situ infrared spectroscopy and computational modelling by density functional theory. These results reveal that both the Zr metal node and organic ligand act as the preferential binding sites and interact strongly with carbon disulfide
Simultaneous enhancement of thermally activated delayed fluorescence and photoluminescence quantum yield via homoconjugation
A fundamental problem facing thermally activated delayed fluorescence (TADF) is to overcome the paradox of efficient electronic transitions and a narrow singlet-triplet energy gap (ΔEST) in a single luminophore. We present a quinoxaline-based TADF iptycene as the first clear example that homoconjugation can be harnessed as a viable design strategy toward this objective. Homoconjugation was introduced in an established TADF luminophore by trimerization through an iptycene core. This homoconjugation was confirmed by electrochemistry. As a direct consequence of homoconjugation we observed synergistic improvements to photoluminescence quantum yield (ΦPL), radiative rate of singlet decay (krS), delayed fluorescence lifetime (τTADF), and rate of reverse intersystem crossing (krISC), while narrowing the ΔEST. The cooperative enhancement is rationalised with TD-DFT calculations including spin-orbit coupling (SOC). A facile synthesis of this system, and the ubiquity of the pyrazine motif in state-of-the-art TADF materials across the electromagnetic spectrum, leads to a great potential for generality
Simultaneous enhancement of thermally activated delayed fluorescence and photoluminescence quantum yield via homoconjugation
A critical challenge facing thermally activated delayed fluorescence (TADF) is to facilitate rapid and efficient electronic transitions while ensuring a narrow singlet–triplet energy gap (ΔEST) in a single luminophore. We present a TADF-active iptycene that clearly demonstrates that homoconjugation can be harnessed as a viable design strategy towards answering this challenge. A homoconjugated analogue of an established quinoxaline-based TADF luminophore has been produced by fusing three of these luminophores together across a shared triptycene core. Homoconjugation was confirmed by electrochemistry, and as a direct consequence of this phenomenon we observed synergistic improvements to photoluminescence quantum yield (ΦPL), radiative rate of singlet decay (kSr), delayed fluorescence lifetime (τTADF), and rate of reverse intersystem crossing (krISC), all while narrowing the ΔEST. The enhancement is rationalised with TD-DFT calculations including spin–orbit coupling (SOC). A facile synthesis, the ubiquity of the pyrazine motif in state-of-the-art TADF materials of all colours, and the extent of the overall performance enhancement leads to a great potential for generality
A Family of Calix[4]arene-Supported [(Mn2Mn2II)-Mn-III] Clusters
International audienceIn the cone conformation calix[4]arenes possess lower-rim polyphenolic pockets that are ideal for the complexation of various transition-metal centres. Reaction of these molecules with manganese salts in the presence of an appropriate base (and in some cases co-ligand) results in the formation of a family of calixarene-supported [(Mn2Mn2II)-Mn-III] clusters that behave as single-molecule magnets (SMMs). Variation in the alkyl groups present at the upper-rim of the cone allows for the expression of a degree of control over the self-assembly of these SMM building blocks, whilst retaining the general magnetic properties. The presence of various different ligands around the periphery of the magnetic core has some effect over the extended self-assembly of these SMMs
Recommended from our members
Blending Ionic and Coordinate Bonds in Hybrid Semiconductor Materials: A General Approach toward Robust and Solution-Processable Covalent/Coordinate Network Structures.
Inorganic semiconductor materials are best known for their superior physical properties, as well as their structural rigidity and stability. However, the poor solubility and solution-processability of these covalently bonded network structures has long been a serious drawback that limits their use in many important applications. Here, we present a unique and general approach to synthesize robust, solution-processable, and highly luminescent hybrid materials built on periodic and infinite inorganic modules. Structure analysis confirms that all compounds are composed of one-dimensional anionic chains of copper iodide (CumIm+22-) coordinated to cationic organic ligands via Cu-N bonds. The choice of ligands plays an important role in the coordination mode (μ1-MC or μ2-DC) and Cu-N bond strength. Greatly suppressed nonradiative decay is achieved for the μ2-DC structures. Record high quantum yields of 85% (λex = 360 nm) and 76% (λex = 450 nm) are obtained for an orange-emitting 1D-Cu4I6(L6). Temperature dependent PL measurements suggest that both phosphorescence and thermally activated delayed fluorescence contribute to the emission of these 1D-AIO compounds, and that the extent of nonradiative decay of the μ2-DC structures is much less than that of the μ1-DC structures. More significantly, all compounds are remarkably soluble in polar aprotic solvents, distinctly different from previously reported CuI based hybrid materials made of charge-neutral CumXm (X = Cl, Br, I), which are totally insoluble in all common solvents. The greatly enhanced solubility is a result of incorporation of ionic bonds into extended covalent/coordinate network structures, making it possible to fabricate large scale thin films by solution processes
Recommended from our members
A switchable sensor and scavenger: detection and removal of fluorinated chemical species by a luminescent metal-organic framework.
Fluorosis has been regarded as a worldwide disease that seriously diminishes the quality of life through skeletal embrittlement and hepatic damage. Effective detection and removal of fluorinated chemical species such as fluoride ions (F-) and perfluorooctanoic acid (PFOA) from drinking water are of great importance for the sake of human health. Aiming to develop water-stable, highly selective and sensitive fluorine sensors, we have designed a new luminescent MOF In(tcpp) using a chromophore ligand 2,3,5,6-tetrakis(4-carboxyphenyl)pyrazine (H4tcpp). In(tcpp) exhibits high sensitivity and selectivity for turn-on detection of F- and turn-off detection of PFOA with a detection limit of 1.3 μg L-1 and 19 μg L-1, respectively. In(tcpp) also shows high recyclability and can be reused multiple times for F- detection. The mechanisms of interaction between In(tcpp) and the analytes are investigated by several experiments and DFT calculations. These studies reveal insightful information concerning the nature of F- and PFOA binding within the MOF structure. In addition, In(tcpp) also acts as an efficient adsorbent for the removal of F- (36.7 mg g-1) and PFOA (980.0 mg g-1). It is the first material that is not only capable of switchable sensing of F- and PFOA but also competent for removing the pollutants via different functional groups