Development and fabrication of bismaleimide-graphite composites

The successful fabrication of high temperature resistant composites depends mainly on the processability of the resin binder matrix. For two new bismaleimide type resins the processing of graphite fabric prepregs to composites is described. One resin coded M 751 has to be processed from N-Methylpyrrolidone, the other resin evaluated is a so-called hot melt solvent-less system. Commercial T300/3000 Graphite fabrics were used as reinforcement. The M 751 - Resin is a press grade material and laminates are therefore moulded in high pressure conditions (400 N/sq cm). The solvent-less resin system H 795 is an autoclave grade material and can be cured at 40 N/sq cm. The cure cycles for both the press grade and the autoclave grade material (Fiberite W 143 fabric prepregs) are provided and the mechanical properties of laminates at low (23 C) and high (232 C) temperatures were measured. For comparison, the neat resin flexural properties are also presented. The water absorption for the neat resins and the graphite fabric laminates after a 1000 hour period was evaluated

Mechanical modeling of initiation of localized yielding under plane stress conditions in rigid-rigid polymer alloys

Two-dimensional Finite Element Method simulations, which involve consideration of the nonlinearity of a material, have been conducted to gain understanding about the rigid-rigid polymer toughening concept we proposed. The simulation results for the plane stress condition indicate that as long as the inclusion phase possesses (i) a 60% difference in the tangent modulus from that of the matrix at any given strain level prior to failure or (ii) smaller yield or craze stain than the yield strain of the matrix, then, localized shear yielding will occur around the inclusion. A toughened rigid-rigid polymer alloy system can then be obtained. The plain strain case is also discussed with an implementation of the rigid-rigid polymer toughening concept.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/38110/1/760311106_ftp.pd

Verwertung lignocellulosehaltiger Produkte zur Gewinnung von Chemierohstoffen. T. 2 Darstellung von 5-Hydroxymethylfurfurol und 5-Acetoxymethylfurfurol

Pt.1 is published in ''Das Papier, 35. Jg., no. 10A, 1981''. Available as TIB: ZA 119 (35,10A)SIGLETIB: FR 633 (2) / FIZ - Fachinformationszzentrum Karlsruhe / TIB - Technische InformationsbibliothekDEGerman