5,372 research outputs found
Solar Stirling receiver alternatives for the terrestrial solar application
Concept studies have been completed for four dish-Stirling receivers, i.e., solar only and thermal storage receiver, each of which is either directly coupled or indirectly (heat pipe) coupled to the Stirling engine. The results of these studies are to be applied to systems benefit/cost analysis to determine the most desirable development approach
A critical discussion on the planning considerations of electric propulsion for space missions
Space missions using electric propulsion systems launched by Saturn V or larger boosters - use of chemical and nuclear rocket
Elements of cost comparison for planetary missions with advanced propulsion
Cost and performance comparisons are made between chemical propulsion and nuclear electric propulsion for planetary missions at Jupiter and beyond. Nuclear rocket comparisons are made for performance only. Titan, Saturn, and space shuttle launch are evaluated, utilizing advanced propulsion upper stages. Appendixes include a performance analysis of multiple shuttle launches, with assembly in earth orbit, and a discussion of nonrecurring costs
Modelling electronic service systems using UML
This paper presents a profile for modelling systems of electronic
services using UML. Electronic services encapsulate business services,
an organisational unit focused on delivering benefit to a consumer,
to enhance communication, coordination and information management.
Our profile is based on a formal, workflow-oriented description of electronic
services that is abstracted from particular implementation technologies.
Resulting models provide the basis for a formal analysis to verify
behavioural properties of services. The models can also relate services to
management components, including workflow managers and Electronic
Service Management Systems (ESMSs), a novel concept drawn from experience
of HP Service Composer and DySCo (Dynamic Service Composer),
providing the starting point for integration and implementation
tasks. Their UML basis and platform-independent nature is consistent
with a Model-Driven Architecture (MDA) development strategy, appropriate
to the challenge of developing electronic service systems using
heterogeneous technology, and incorporating legacy systems
The role of NaCl in flame chemistry, in the deposition process, and in its reactions with protective oxides as related to hot corrosion
Sodium chloride is believed to be the primary source of turbine engine contamination that contributes to hot corrosion. The behavior of NaCl-containing aerosols ingested with turbine intake air is very complex; some of the NaCl may vaporize during combustion while some may remain as particulates. The NaCl can lead to Na2SO4 formation by several possible routes or it can contribute to corrosion directly. Hydrogen or oxygen atom reaction with NaCl(c) was shown to result in the release of Na(g). Gaseous NaCl in flames can be partially converted to gaseous Na2SO4 by homogeneous reactions. The remaining gaseous NaCl and other Na-containing molecules can act as sodium carriers for condensate deposition of Na2SO4 on cool surfaces. A frozen boundary layer theory was developed to predict the rates of deposition. The condensed phase NaCl can be converted directly to condensed Na2SO4 by reaction with sulfur oxides and O2. Reaction of gaseous NaCl with Cr2O3 results in the vapor phase transport of chromium by the formation of complex Cr-containing gaseous molecules. Similar gaseous complexes are formed with molybdenum. The presence of gaseous NaCl was shown to affect the oxidation kinetics of Ni-Cr alloys. It also causes changes in the surface morphology of Al2O3 scales formed on Al-containing alloys
High-temperature mass spectrometry - Vaporization of group 4-B metal carbides
The high temperature vaporization of the metal-carbon systems TiC, ZrC, HfC, and ThC was studied by the Knudsen effusion - mass spectrometric method. For each system the metal dicarbide and tetracarbide molecular species were identified in the gas phase. Relative ion currents of the carbides and metals were measured as a function of temperature. Second- and third-law methods were used to determine enthalpies. Maximum values were established for the dissociation energies of the metal monocarbide molecules TiC, ZrC, HfC, and ThC. Thermodynamic functions used in the calculations are discussed in terms of assumed molecular structures and electronic contributions to the partition functions. The trends shown by the dissociation energies of the carbides of Group 4B are compared with those of neighboring groups and discussed in relation to the corresponding oxides and chemical bonding. The high temperature molecular beam inlet system and double focusing mass spectrometer are described
A pilot study of human response to general aviation aircraft noise
A pilot study, conducted to evaluate procedures for measuring the noise impact and community response to general aviation aircraft around Torrance Municipal Airport, a typical large GA airport, employed Torrance Airport's computer-based aircraft noise monitoring system, which includes nine permanent monitor stations surrounding the airport. Some 18 residences near these monitor stations were equipped with digital noise level recorders to measure indoor noise levels. Residents were instructed to fill out annoyance diaries for periods of 5-6 days, logging the time of each annoying aircraft overflight noise event and judging its degree of annoyance on a seven-point scale. Among the noise metrics studied, the differential between outdoor maximum A-weighted noise level of the aircraft and the outdoor background level showed the best correlation with annoyance; this correlation was clearly seen at only high noise levels, And was only slightly better than that using outdoor aircraft noise level alone. The results indicate that, on a national basis, a telephone survey coupled with outdoor noise measurements would provide an efficient and practical means of assessing the noise impact of general aviation aircraft
Space power systems technology enablement study
The power system technologies which enable or enhance future space missions requiring a few kilowatts or less and using the space shuttle were assessed. The advances in space power systems necessary for supporting the capabilities of the space transportation system were systematically determined and benefit/cost/risk analyses were used to identify high payoff technologies and technological priorities. The missions that are enhanced by each development are discussed
The dissociation energy of gaseous titanium mononitride
Dissociation energy of gaseous titanium nitrid
Dissociation energies of some high temperature molecules containing aluminum
The Knudsen cell mass spectrometric method has been used to investigate the gaseous molecules Al2, AlSi,AlSiO, AlC2, Al2C2, and AlAuC2. Special attention was given to the experimental considerations and techniques needed to identify and to measure ion intensities for very low abundance molecular species. Second- and third-law procedures were used to obtain reaction enthalpies for pressure calibration independent and isomolecular exchange reactions. Dissociation energies for the molecules were derived from the measured ion intensities, free-energy functions obtained from estimated molecular constants, and auxiliary thermodynamic data. The bonding and stability of these aluminum containing molecules are compared with other similar species
- …