1,047 research outputs found
An uncommon pyrene type and two new genera in the Neotropical Psychotrieae (Rubiaceae)
Validating Phasing and Geometry of Large Focal Plane Arrays
The Kepler Mission is designed to survey our region of the Milky Way galaxy to discover hundreds of Earth-sized and smaller planets in or near the habitable zone. The Kepler photometer is an array of 42 CCDs (charge-coupled devices) in the focal plane of a 95-cm Schmidt camera onboard the Kepler spacecraft. Each 50x25-mm CCD has 2,200 x 1,024 pixels. The CCDs accumulate photons and are read out every six seconds to prevent saturation. The data is integrated for 30 minutes, and then the pixel data is transferred to onboard storage. The data is subsequently encoded and transmitted to the ground. During End-to-End Information System (EEIS) testing of the Kepler Mission System (KMS), there was a need to verify that the pixels requested by the science team operationally were correctly collected, encoded, compressed, stored, and transmitted by the FS, and subsequently received, decoded, uncompressed, and displayed by the Ground Segment (GS) without the outputs of any CCD modules being flipped, mirrored, or otherwise corrupted during the extensive FS and GS processing. This would normally be done by projecting an image on the focal plane array (FPA), collecting the data in a flight-like way, and making a comparison between the original data and the data reconstructed by the science data system. Projecting a focused image onto the FPA through the telescope would normally involve using a collimator suspended over the telescope opening. There were several problems with this approach: the collimation equipment is elaborate and expensive; as conceived, it could only illuminate a limited section of the FPA (.25 percent) during a given test; the telescope cover would have to be deployed during testing to allow the image to be projected into the telescope; the equipment was bulky and difficult to situate in temperature-controlled environments; and given all the above, test setup, execution, and repeatability were significant concerns. Instead of using this complicated approach of projecting an optical image on the FPA, the Kepler project developed a method using known defect features in the CCDs to verify proper collection and reassembly of the pixels, thereby avoiding the costs and risks of the optical projection approach. The CCDs composing the Kepler FPA, as all CCDs, had minor defects. At ambient temperature, some pixels look far brighter than they should. These ghot h pixels have a higher rate of charge leakage than the others due to manufacturing variations. They are usually stable over time, and appear at temperatures above 5 oC. The hot pixels on the Kepler FPA were mapped before photometer assembly during module testing. Selected hot pixels were used as target gstars h for the purposes of EEIS testing. gDead h pixels are permanently off, producing a permanently black pixel. These can also be used if there is some illumination of the FPA. During EEIS testing, Dark Current Full Frame Images (FFIs) taken at room temperature were used to create the hot pixel maps for all 84 Kepler photometer CCD channels. Data from two separate nights were used to create two hot pixel maps per channel, which were cross-correlated to remove cosmic ray events which appear to be hot pixels. These hot pixel maps obtained during EEIS testing were compared to the maps made during module testing to verify that the end-to-end data flow was correct
Generation Of 20 Mw Of Blue Laser-Radiation From A Diode-Pumped Sum-Frequency Laser
Resonant intracavity sum-frequency mixing of a diode-pumped Nd:yAG laser and a 100 mW single stripe laser diode, has been used to generate a measured output power of 20 mW of blue laser radiation at 459 nm. This represents a total conversion efficiency of approximately 68% of the single stripe laser diode power incident on the cavity. The laser was also demonstrated to operate over a tuning range of 12 nm via angle tuning of the nonlinear crystal
Firesticks Virtual Conference 2020: Activating Aboriginal Fire Solutions and the Pathways Forward
How can gender considerations be better integrated into animal health emergency preparedness and response?
Global and national authorities have not historically approached animal health emergencies through a gendered lens. Yet these events almost certainly have gendered dimensions, such as differential engagement of women or men depending on their culturally accepted or assigned roles for animal care; risk of exposure to zoonoses; and access to emergency resources during response and recovery. Despite the role that gender seems to play with respect to animal health emergencies, little research has been conducted to better understand such dynamics, and little policy has been promulgated to address it in a way that optimizes response while ensuring equitable outcomes. This piece summarizes 3 key themes that emerged from a panel discussion on gender and animal health emergencies at the World Organisation for Animal Health Global Conference on Emergency Management in April 2023. These themes were differential gendered exposure to pathogens; a lack of equitable gender representation in animal health decision-making; and enhancement of pathways for recognizing gender in national and international actions in preparing for, detecting, and responding to animal health emergencies. Beyond increasing opportunities for women to engage in leadership, the animal health and veterinary communities will benefit from connecting practitioners with gender experts to develop more integrative approaches to emergency preparedness and management. Animal health professionals should also advocate for further research to elucidate gender-specific dynamics in human populations in the context of animal emergencies and the promulgation of evidence-based policies. Such transformative efforts will lead to better outcomes for all people who depend on and provide care for animals
âDo i care?â young adults' recalled experiences of early adolescent overweight and obesity: a qualitative study
<p>Objective:Â Individual behaviour change to reduce obesity requires awareness of, and concern about, weight. This paper therefore describes how young adults, known to have been overweight or obese during early adolescence, recalled early adolescent weight-related awareness and concerns. Associations between recalled concerns and weight-, health- and peer-related survey responses collected during adolescence are also examined.</p>
<p>Design:Â Qualitative semi-structured interviews with young adults; data compared with responses to self-report questionnaires obtained in adolescence.</p>
<p>Participants:Â A total of 35 participants, purposively sub-sampled at age 24 from a longitudinal study of a school year cohort, previously surveyed at ages 11, 13 and 15. Physical measures during previous surveys allowed identification of participants with a body mass index (BMI) indicative of overweight or obesity (based on British 1990 growth reference) during early adolescence. Overall, 26 had been obese, of whom 11 had BMI99.6th centile, whereas 9 had been overweight (BMI=95thâ97.9th centile).</p>
<p>Measures:Â Qualitative interview responses describing teenage life, with prompts for school-, social- and health-related concerns. Early adolescent self-report questionnaire data on weight-worries, self-esteem, friends and victimisation (closed questions).</p>
<p>Results:Â Most, but not all recalled having been aware of their overweight. None referred to themselves as having been obese. None recalled weight-related health worries. Recollection of early adolescent obesity varied from major concerns impacting on much of an individual's life to almost no concern, with little relation to actual severity of overweight. Recalled concerns were not clearly patterned by gender, but young adult males recalling concerns had previously reported more worries about weight, lower self-esteem, fewer friends and more victimisation in early adolescence; no such pattern was seen among females.
Conclusion:Â The popular image of the unhappy overweight teenager was not borne out. Many obese adolescents, although well aware of their overweight recalled neither major dissatisfaction nor concern. Weight-reduction behaviours are unlikely in such circumstances.</p>
Recommended from our members
SEIS: Insight's Seismic Experiment for Internal Structure of Mars.
By the end of 2018, 42 years after the landing of the two Viking seismometers on Mars, InSight will deploy onto Mars' surface the SEIS (Seismic Experiment for Internal Structure) instrument; a six-axes seismometer equipped with both a long-period three-axes Very Broad Band (VBB) instrument and a three-axes short-period (SP) instrument. These six sensors will cover a broad range of the seismic bandwidth, from 0.01 Hz to 50 Hz, with possible extension to longer periods. Data will be transmitted in the form of three continuous VBB components at 2 sample per second (sps), an estimation of the short period energy content from the SP at 1 sps and a continuous compound VBB/SP vertical axis at 10 sps. The continuous streams will be augmented by requested event data with sample rates from 20 to 100 sps. SEIS will improve upon the existing resolution of Viking's Mars seismic monitoring by a factor of ⌠2500 at 1 Hz and ⌠200 000 at 0.1 Hz. An additional major improvement is that, contrary to Viking, the seismometers will be deployed via a robotic arm directly onto Mars' surface and will be protected against temperature and wind by highly efficient thermal and wind shielding. Based on existing knowledge of Mars, it is reasonable to infer a moment magnitude detection threshold of M w ⌠3 at 40 â epicentral distance and a potential to detect several tens of quakes and about five impacts per year. In this paper, we first describe the science goals of the experiment and the rationale used to define its requirements. We then provide a detailed description of the hardware, from the sensors to the deployment system and associated performance, including transfer functions of the seismic sensors and temperature sensors. We conclude by describing the experiment ground segment, including data processing services, outreach and education networks and provide a description of the format to be used for future data distribution.Electronic supplementary materialThe online version of this article (10.1007/s11214-018-0574-6) contains supplementary material, which is available to authorized users
- âŠ