2,404 research outputs found
Introductory notes for the Acta IMEKO Special Issue on the 24th IMEKO Technical Committee 4 International Symposium and the 22nd International Workshop on Analogue-to-Digital Conversion and Digital-to-Analogue Conversion Modelling and Testing
Measurement has always been a tool by which we can observe the world around us. This concept was once again confirmed during the 24th IMEKO Technical Committee 4 (TC4) International Symposium, which showed how topics related to the world of measurement range across many fields of knowledge.
The IMEKO TC4 International Symposium is one of the most important events in the fields concerned with the theoretical and practical aspects of the measurement of electrical quantities and related instrumentation. It involves institutions and academia in a discussion of the state of the art and issues that require a joint approach by engineers, academics and other experts of measurement, instrumentation, testing and metrolog
Low-velocity impact behaviour of fibreglass-aluminium laminates
Low-velocity impact tests were performed on fibreglass–aluminium composites made of 2024 T3 sheets and S2-glass/epoxy prepreg layers, using an instrumented falling weight machine. For comparison purposes, similar tests were carried out on monolithic 2024 T3 sheets of equivalent thickness. In the tests, the impact speed, mass, and energy were varied, to ascertain the influence of these parameters on the material response. From the results obtained, the overall force–displacement curve only depends on the impact energy, rather than on the mass and speed separately. Further, the energy required for penetration is higher for monolithic aluminium than for the fibreglass– aluminium. However, the latter material seems to offer better performance than carbon fibre- and glass fibre-reinforced laminates in terms of penetration energy, damage resistance, and inspectability. The main failure modes of fibreglass – aluminium were assessed by both ultrasonic C-scan and chemical grinding of aluminium sheets. It was found that the energy required for first failure is very low, whereas the energy level resulting in first fibre failure is similar to that inducing first cracking in the 2024 T3 sheets. From the experimental data, simple empirical relationships were found for the calculation of maximum contact force, energy, and residual displacement as a function of the maximum displacement
Electron cloud buildup and impedance effects on beam dynamics in the future circular e+e− collider and experimental characterization of thin TiZrV vacuum chamber coatings
The Future Circular Collider FCC-ee is a study toward a high luminosity electron-positron collider with a centre-of-mass energy from 91 GeV to 365 GeV. Due to the beam parameters and pipe dimensions, collective effects and electron cloud can be very critical aspects for the machine and can represent the main limitations to its performance. An estimation of the electron cloud build up in the main machine components and an impedance model are required to analyze the induced instabilities and to find solutions for their mitigation. Special attention has been given to the resistive wall impedance associated with a layer of nonevaporable getter (NEG) coating on the vacuum chamber required for electron cloud mitigation. The studies presented in this paper will show that minimizing the thickness of this coating layer is mandatory to increase the single bunch instability thresholds in the proposed lepton collider at 45.6 GeV. For this reason, NEG thin films with thicknesses below 250 nm have been investigated by means of numerical simulations to minimize the resistive wall impedance. In parallel, an extensive measurement campaign was performed at CERN to characterize these thin films, with the purpose of finding the minimum effective thickness satisfying vacuum and electron cloud requirements
Tracking Study of the Effect of BPM Impedances in the SPS
Following the observation of a Transverse Mode Coupling Instability (TMCI) in the SPS [1, 2], a systematic estimate of the impedance of the various pieces of equipment installed in the machine has started. In this report the contribution of the Beam Position Monitor trapped modes to the global transverse impedance is considered. The trapped modes have been thus calculated with MAFIA and characterized with their resonator parameters. These impedances have been subsequently fed into the MOSES and HEADTAIL codes in order to evaluate the expected TMCI threshold in the SPS and compare it with the experimental observations
A Novel Highly Symmetric TM01 Mode Launcher for Ultimate Brightness Applications
The R&D of high gradient radiofrequency (RF) devices is aimed to develop innovative accelerating structures based on new manufacturing techniques and materials in order to construct devices operating with the highest accelerating gradient. Recent studies have shown a large increase in the maximum sustained RF surface electric fields in copper structures operating at cryogenic temperatures. These novel approaches allow significant performance improvements of RF photoinjectors. Indeed the operation at high surface fields results in considerable increase of electron beam brilliance. This enhancement requires high field quality in the RF photoinjector and, specifically in the design of the power coupler. In this work we present a novel device for the RF photoinjector: a compact X-band TM01 mode launcher with a fourfold symmetry which minimizes both dipole and quadrupole RF components
Molybdenum sputtering film characterization for high gradient accelerating structures
Technological advancements are strongly required to fulfill the demands of
new accelerator devices with the highest accelerating gradients and operation
reliability for the future colliders. To this purpose an extensive R&D
regarding molybdenum coatings on copper is in progress. In this contribution we
describe chemical composition, deposition quality and resistivity properties of
different molybdenum coatings obtained via sputtering. The deposited films are
thick metallic disorder layers with different resistivity values above and
below the molibdenum dioxide reference value. Chemical and electrical
properties of these sputtered coatings have been characterized by Rutherford
backscattering, XANES and photoemission spectroscopy. We will also present a
three cells standing wave section coated by a molybdenum layer 500 nm
thick designed to improve the performance of X-Band accelerating systems.Comment: manuscript has been submitted and accepted by Chinese Physics C
(2012
Low power RF test of a quadrupole-free X-Band mode launcher for high brightness applications
In this work we present the low power RF characterization of a novel TM01 X-band mode launcher for the new generation of high brightness RF photo-injectors. The proposed mode launcher exploits a fourfold symmetry which minimizes both the dipole and the quadrupole fields in order to mitigate the emittance growth in the early stages of the acceleration process. Two identical aluminum mode launchers have been assembled and measured in back-to-back configurations for three different central waveguide lengths. From the back-to-back results we infer the performance of each mode launcher. The low power RF test, performed at the Istituto Nazionale di Fisica Nucleare Laboratori Nazionali del Sud (INFN-LNS), validate both the numerical simulations and the quality of fabrication. An oxygen-free high-conductivity copper version of the device is being manufactured for high power and ultra high vacuum tests that are planned to be conducted at SLAC
Beam heat load analysis with COLDDIAG: a cold vacuum chamber for diagnostics
The knowledge of the heat intake from the electron beam is essential to design the cryogenic layout of superconducting insertion devices. With the aim of measuring the beam heat load to a cold bore and understanding the responsible mechanisms, a cold vacuum chamber for diagnostics (COLDDIAG) has been built. The instrumentation comprises temperature sensors, pressure gauges, mass spectrometers and retarding field analyzers, which allow to study the beam heat load and the influence of the cryosorbed gas layer. COLDDIAG was installed in the storage ring of the Diamond Light Source from September 2012 to August 2013. During this time measurements were performed for a wide range of machine conditions, employing the various measuring capabilities of the device. Here we report on the analysis of the measured beam heat load, pressure and gas content, as well as the low energy charged particle flux and
spectrum as a function of the electron beam parameters
- …