20,723 research outputs found

    Rappertk: a versatile engine for discrete restraint-based conformational sampling of macromolecules

    Get PDF
    Background: Macromolecular structures are modeled by conformational optimization within experimental and knowledge-based restraints. Discrete restraint-based sampling generates high-quality structures within these restraints and facilitates further refinement in a continuous all-atom energy landscape. This approach has been used successfully for protein loop modeling, comparative modeling and electron density fitting in X-ray crystallography.|Results: Here we present a software toolkit (Rappertk) which generalizes discrete restraint-based sampling for use in structural biology. Modular design and multi-layered architecture enables Rappertk to sample conformations of any macromolecule at many levels of detail and within a variety of experimental restraints. Performance against a C-alpha-tracing benchmark shows that the efficiency has not suffered despite the overhead required by this flexibility. We demonstrate the toolkit's capabilities by building high-quality beta-sheets and by introducing restraint-driven sampling. RNA sampling is demonstrated by rebuilding a protein-RNA interface. Ability to construct arbitrary ligands is used in sampling protein- ligand interfaces within electron density. Finally, secondary structure and shape information derived from EM are combined to generate multiple conformations of a protein consistent with the observed density.|Conclusion: Through its modular design and ease of use, Rappertk enables exploration of a wide variety of interesting avenues in structural biology. This toolkit, with illustrative examples, is freely available to academic users from http://www-cryst.bioc.cam.ac.uk/similar to swanand/mysite/rtk/index.html

    Antibacterial properties of Cu-ZrO2 thin films prepared via aerosol assisted chemical vapour deposition

    Get PDF
    © 2015 The Royal Society of Chemistry. The antibacterial properties of a Cu-ZrO2 film grown via aerosol assisted chemical vapour deposition are presented. The composite film showed high activity against E. coli (Gram-negative) and S. aureus (Gram-positive) bacteria with 5 log10 (E. coli) and 4 log10 (S. aureus) decrease in viable bacteria achieved within 20 and 60 minutes respectively. These results were comparable to a pure copper film that was prepared under the same conditions. The composite film was characterized for material properties using a range of techniques including X-ray photoemission and X-ray diffraction

    Quality of life and visual function in Nigeria: findings from the National Survey of Blindness and Visual Impairment

    Get PDF
    Aims To assess associations of visual function (VF) and quality of life (QOL) by visual acuity (VA), causes of blindness and types of cataract procedures in Nigeria. Methods Multi-stage stratified cluster random sampling was used to identify a nationally representative sample of persons aged >= 40 years. VF/QOL questionnaires were administered to participants with VA = 6/12. Results VF/QOL questionnaires were administered to 2076 participants. Spearman's rank correlation showed a strong correlation between decreasing VA and VF/QOL scores (p< 0.0001) with greatest impact on social (p< 0.0001) and mobility-related activities (p< 0.0001). People who were blind due to glaucoma had lower VF and QOL scores than those who were blind due to cataract. Mean VF and QOL scores were lower after couching compared with conventional cataract surgery (mean VF score=51.0 vs 63.0 and mean QOL score=71.3 vs 79.3). Finally, VF and QOL scores were lower among populations with specific characteristics. Conclusions Populations with the following characteristics should be targeted to improve VF and QOL: people who are blind, older people, women, manual labourers, people living in rural areas, those living in the northern geopolitical zones, those practising Islamic and Traditionalism faith, those not currently married and those who have undergone couching

    Visibility Representations of Boxes in 2.5 Dimensions

    Full text link
    We initiate the study of 2.5D box visibility representations (2.5D-BR) where vertices are mapped to 3D boxes having the bottom face in the plane z=0z=0 and edges are unobstructed lines of sight parallel to the xx- or yy-axis. We prove that: (i)(i) Every complete bipartite graph admits a 2.5D-BR; (ii)(ii) The complete graph KnK_n admits a 2.5D-BR if and only if n19n \leq 19; (iii)(iii) Every graph with pathwidth at most 77 admits a 2.5D-BR, which can be computed in linear time. We then turn our attention to 2.5D grid box representations (2.5D-GBR) which are 2.5D-BRs such that the bottom face of every box is a unit square at integer coordinates. We show that an nn-vertex graph that admits a 2.5D-GBR has at most 4n6n4n - 6 \sqrt{n} edges and this bound is tight. Finally, we prove that deciding whether a given graph GG admits a 2.5D-GBR with a given footprint is NP-complete. The footprint of a 2.5D-BR Γ\Gamma is the set of bottom faces of the boxes in Γ\Gamma.Comment: Appears in the Proceedings of the 24th International Symposium on Graph Drawing and Network Visualization (GD 2016

    Prolonged low flow reduces reactive hyperemia and augments low flow mediated constriction in the brachial artery independent of the menstrual cycle

    Get PDF
    © 2013 Rakobowchuk et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.Non-invasive forearm ischemia-reperfusion injury and low flow induced vascular dysfunction models provide methods to evaluate vascular function. The role of oestrogen, an endogenous anti-oxidant on recovery from ischemia-reperfusion injury has not been evaluated nor has the impact of prolonged low flow on vascular function been established. Eight healthy women (33610 yr) attended the lab during the follicular, ovulatory and mid-luteal phases of their menstrual cycles. After 30 minutes of rest, brachial artery vascular function was assessed by ultrasound measurements of diameter changes during 5 minutes of forearm ischemia and 3 minutes after. Subsequently, a 20-minute forearm ischemia period was completed. Further, vascular function assessments were completed 15, 30 and 45 minutes into recovery. Flow-mediated dilation, lowflow-mediated constriction, and reactive hyperaemia proximal to the area of ischemia were determined. Flow-mediated dilation was reduced at 15 minutes of recovery but recovered at 30 and 45 minutes (PRE: 7.161.0%, POST15:4.560.6%, POST30:5. 560.7% POST45:5.960.4%, p,0.01). Conversely, low-flow mediated constriction increased (PRE: 21.360.4%, POST15: 23.360.6%, POST30: 22.560.5% POST45: 21.560.12%, p,0.01). Reactive hyperaemia was reduced throughout recovery (p,0.05). Data were unaffected by menstrual phase. Prolonged low flow altered vascular function and may relate as much to increased vasoconstriction as with decreased vasodilation. Reductions in anterograde shear and greater retrograde shear likely modulate the brachial artery response, but the reduced total shear also plays an important role. The data suggest substantial alterations in vascular function proximal to areas of ischemia with potential clinical implications following reperfusion.British Heart Foundation (PG/08/060/25340),a Physiological Society summer studentship to SG, and a Wellcome Trust Vacation Studentship to EP

    3D Visibility Representations of 1-planar Graphs

    Full text link
    We prove that every 1-planar graph G has a z-parallel visibility representation, i.e., a 3D visibility representation in which the vertices are isothetic disjoint rectangles parallel to the xy-plane, and the edges are unobstructed z-parallel visibilities between pairs of rectangles. In addition, the constructed representation is such that there is a plane that intersects all the rectangles, and this intersection defines a bar 1-visibility representation of G.Comment: Appears in the Proceedings of the 25th International Symposium on Graph Drawing and Network Visualization (GD 2017

    Orientation cues for high-flying nocturnal insect migrants: do turbulence-induced temperature and velocity fluctuations indicate the mean wind flow?

    Get PDF
    Migratory insects flying at high altitude at night often show a degree of common alignment, sometimes with quite small angular dispersions around the mean. The observed orientation directions are often close to the downwind direction and this would seemingly be adaptive in that large insects could add their self-propelled speed to the wind speed, thus maximising their displacement in a given time. There are increasing indications that high-altitude orientation may be maintained by some intrinsic property of the wind rather than by visual perception of relative ground movement. Therefore, we first examined whether migrating insects could deduce the mean wind direction from the turbulent fluctuations in temperature. Within the atmospheric boundary-layer, temperature records show characteristic ramp-cliff structures, and insects flying downwind would move through these ramps whilst those flying crosswind would not. However, analysis of vertical-looking radar data on the common orientations of nocturnally migrating insects in the UK produced no evidence that the migrants actually use temperature ramps as orientation cues. This suggests that insects rely on turbulent velocity and acceleration cues, and refocuses attention on how these can be detected, especially as small-scale turbulence is usually held to be directionally invariant (isotropic). In the second part of the paper we present a theoretical analysis and simulations showing that velocity fluctuations and accelerations felt by an insect are predicted to be anisotropic even when the small-scale turbulence (measured at a fixed point or along the trajectory of a fluid-particle) is isotropic. Our results thus provide further evidence that insects do indeed use turbulent velocity and acceleration cues as indicators of the mean wind direction

    Self Injection length in La0.7 Ca0.3 Mno3-YBa 2Cu3O7-d ferromagnet- superconductor multi layer thin films

    Get PDF
    We have carried out extensive studies on the self-injection problem in barrierless heterojunctions between La0.7Ca0.3MnO3 (LCMO) and YBa2Cu3O7-d (YBCO). The heterojunctions were grown in situ by sequentially growing LCMO and YBCO films on LaAlO3 (LAO) substrate using a pulsed laser deposition (PLD) system. YBCO micro-bridges with 64 microns width were patterned both on the LAO (control) and LCMO side of the substrate. Critical current, Ic, was measured at 77K on both the control side as well as the LCMO side for different YBCO film thickness. It was observed that while the control side showed a Jc of ~2 x 10E6 A/ cm2 the LCMO side showed about half the value for the same thickness (1800 A). The difference in Jc indicates that a certain thickness of YBCO has become 'effectively' normal due to self-injection. From the measurement of Jc at two different thickness' (1800 A and 1500 A) of YBCO both on the LAO as well as the LCMO side, the value of self-injection length (at 77K) was estimated to be ~900 A self-injection length has been quantified. A control experiment carried out with LaNiO3 deposited by PLD on YBCO did not show any evidence of self-injection.Comment: 6 pages, one figure in .ps forma
    corecore