Improved dispersibility of nanofibrillated cellulose via simple microwave-assisted esterification

Nanofibrillated cellulose (NFC) has been successfully esterified by lactic acid (LA) in the presence of HCl catalyst in an aqueous medium using a simple microwave heating process. The degree of substitution (DS) of ester groups on modified NFC (mNFC) was quantified through a systematic characterization consisting of titration, NMR, and XPS, revealing a consistent trend in the levels of DS in mNFC. The reaction parameters of the microwave heating process including the ratio between NFC and LA (1:10), amount of catalyst (5 wt%), energy input and time, have been optimized, achieving a DS of 0.66 in mNFC with a typical power of 800 Watts in 1 min only. The TEM and XRD results confirmed that the structure and characteristics of the nanofibrillated fibers were preserved following the process. Finally, the improved dispersibility of mNFC with high DS in low polarity solvents and polylactic acid (PLA) matrix was validated

Composite foams made from biodegradable polymers for food packaging applications

Polymeric foams are cell structures (porous microstructures) that have been frequently made from synthetic polymers for use in the development of food packaging. Due to the problems concerning the environmental impact caused by polymers from the petrochemical industry, the foams have been more recently studied from biodegradable polymers. However, the polymer materials obtained are usually susceptible to moisture, thus conditioning the collapse of the porous structure of the material. As an alternative, the composite foams have been investigated from nanofillers such as clays, cellulose, nanoparticles, among others. This chapter aims to analyze the recent advances in the studies of composite foams.Fil: Araque Moreno, Luis Miguel. Federal University Of Piauí; BrasilFil: Alvarez, Vera Alejandra. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Gutiérrez Carmona, Tomy José. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentin

Life cycle assessment of bacterial cellulose production

Purpose Bacterial cellulose (BC), obtained by fermentation, is an innovative and promising material with a broad spectrum of potential applications. Despite the increasing efforts towards its industrialization, a deeper understanding of the environmental impact related to the BC production process is still required. This work aimed at quantifying the environmental, health, and resource depletion impacts related to a production of BC. Methods An attributional life cycle assessment (LCA) was applied to a process design of production of BC, by static culture, following a cradle-to-gate approach. The LCA was modeled with GaBi Pro Software using the ReCiPe 2016 (H) methodology with environmental impact indicators at midpoint level. The functional unit was defined as 1 kg of BC (dry mass), in 138.8 kg of water. Results From the total used resources (38.9 ton/kg of BC), water is the main one (36.1 ton/kg of BC), most of which (98%) is returned to fresh waters after treatment. The production of raw materials consumed 17.8 ton of water/kg of BC, 13.8 ton/kg of BC of which was for the production of carton packaging, culture medium raw materials, and sodium hydroxide (for the washing of BC). The remaining consumed water was mainly for the fermentation (3.9 ton/kg) and downstream process (7.7 ton/kg). From the identified potential environmental impacts, the production of raw materials had the highest impact, mainly on Climate change, Fossil depletion, Human toxicity, non-cancer, and Terrestrial toxicity. The sodium dihydrogen phosphate production, used in the culture medium, showed the highest environmental impacts in Human toxicity, non-cancer and Terrestrial ecotoxicity, followed by corn syrup and carton production. The static culture fermentation and downstream process showed impact in Climate change and Fossil depletion. Conclusions Per se, the BC production process had a small contribution to the consumption of resources and environmental impact of the BC global life cycle.This study was supported by the Portuguese Foundation for Science and Technology (FCT) within the scope of the strate gic funding of UIDB/04469/2020 and UIDB/00511/2020 units and MultiBiorefinery project (SAICTPAC/0040/2015-POCI-01-0145- FEDER-016403). This study was also supported by The Navigator Company through the I&D no. 21874, “Inpactus-–Produtos e Tecno logias Inovadores a partir do Eucalipto”, funded through the European Regional Development Fund (ERDF) and the Programa Operacional Competitividade e Internacionalização (POCI) is greatly acknowl edged. The work by Belmira Neto was fnancially supported by Base Funding—UIDB/00511/2020 of the Laboratory for Process Engineer ing, Environment, Biotechnology and Energy—LEPABE—funded by national funds through the FCT/MCTES (PIDDAC).info:eu-repo/semantics/publishedVersio

Biodegradable starch-based composites: effect of micro and nanoreinforcements on composite properties

Thermoplastic starch (TPS) matrix was reinforced with various kenaf bast cellulose nanofiber loadings (0–10 wt%). Thin films were prepared by casting and evaporating the mixture of aqueous suspension of nanofibers (NFs), starch, and glycerol which underwent gelatinization process at the same time. Moreover, raw fibers (RFs) reinforced TPS films were prepared with the same contents and conditions. The effects of filler type and loading on different characteristics of prepared materials were studied using transmission and scanning electron microscopies, X-ray diffractometry, Fourier transform infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry, and moisture absorption analysis. Obtained results showed a homogeneous dispersion of NFs within the TPS matrix and strong association between the filler and matrix. Moreover, addition of nanoreinforcements decreased the moisture sensitivity of the TPS film significantly. About 20 % decrease in moisture content at equilibrium was observed with addition of 10 wt% NFs while this value was only 5.7 % for the respective RFs reinforced film

All-cellulose composites of regenerated cellulose fibres by surface selective dissolution

All-cellulose composites of Lyocell and high modulus/strength cellulose fibres were successfully prepared using a surface selective dissolution method. The effect of immersion time of the fibres in the solvent during composite's preparation and the effect of the starting fibre's structure on their properties were investigated. Scanning electron microscopy, X-ray diffraction, dynamic mechanical analysis, and tensile testing were used to assess the structure and properties of the composites. These all-cellulose composites of regenerated cellulose fibres demonstrate a promising route to biocomposites with excellent mechanical and thermal properties which can also be tuned depending upon a selection of fibres and preparation parameters. Crown Copyright © 2008