Comparison of DeLorme with Oxford resistance training techniques: effects of training on muscle damage markers

Aim: The purpose of this study was comparing DeLorme with Oxford methods through ten repetition maximum (10 RM) performance and serum creatine kinase (CK) and lactate dehydrogenase (LDH) activity. Methods: Before and after four weeks of training with the DEL (n=16) or OXF (n=16) resistance training (RT) methods, rest and post exercise serum CK activity, serum LDH activity and 10 RM performance were measured and compared. Results: Both methods provide higher 10 RM results after training without significant differences between groups (p<0.05). Rest and post exercise CK and LDH activity was less after training with DeLorme (DEL) and Oxford (OXF), but the magnitude of the relative peak response (48-hr our 72-hr post exercise, respectively) was higher after each training protocol. Comparisons of CK activity between groups display non-significant differences. Conclusion: DEL or OXF training methods cause the same improvement on muscle performance and both alters CK activity without differences between methods in a 4-week RT program

Addressing drinking water salinity due to sea water intrusion in Praia de Leste, Parana, by a brackish water desalination pilot plant

Seawater intrusion into the Pombas River, source of freshwater to Praia de Leste on the coast of Parana in Brazil presents a problem to the water utility as most water treatment plants in Brazil are conventional. To find a solution to this problem, a pilot plant (1 m3 /h) consisting of ultrafiltration (UF) followed by reverse osmosis (RO) was developed and evaluated. For testing, brackish water was produced with a concentration of 1,500 ± 100 mg/L of total dissolved solids (TDS), mixing seawater and fresh water. To evaluate the water quality, TDS, electrical conductivity, pH, temperature, apparent color, turbidity, alkalinity, total hardness, calcium, chloride and sulfate were monitored. For operational performance, flowrates, osmotic pressure, filtration rate, recovery rate and mass balance were analyzed. On average, the UF system removed 96.4% of turbidity and 98.6% of apparent color; whereas the RO system removed 99.4% of TDS. The overall average recovery (UF and RO) was 45.81% with average osmotic pressure of 8.21 bar, filtration rate of 30.7 L/h/m2 in the UF system and 21.7 L/h/m2 in the RO system. From a water quality point of view, the system was effective in processing brackish into fresh water of high quality

Application of fuzzy logic and geostatistic in the analysis of the fertility of a soil under pasture

The objective of this research was to generate a representation of the chemical attributes of the soil, using fuzzy logic and geostatistic analysis as procedures of appropriate mapping to the representation of continuous phenomena. The area in study is located in the south of Espirito Santo state, county district of Alegre. The experiment was done in an Ultisol Yellow-Red loamy texture under cultivation of pasture Brachiaria decumbens The soil was sampled in the depth of 0-0,2 m, in the 64 points of a regular grid, with dimension of 90 x 90 m. The studied chemical attributes were K, Ca, Mg, Al. SB, T and V It took place a continuous classification (if the attributes, using the fuzzy logic The data were submitted to the descriptive analysis and, soon afterwards. the geostatistic analysis. through the semivariograms adjustment. The attributes presented moderate and high variability measured by CV. All of the attributes presented spatial dependence, demonstrated by the adjustment of the spherical and the exponential semivariogram The maps in study presented a mild representation of the limits of variation of the degrees of pertinence of the chemical attributes of the soil, turning them more representative The fuzzy logic associated to the geostatistic analysis is it suitable technique to be applied to generate a representation of soils attributes, which naturally present a gradual variation in the land.40332333

Balanço e análise da sustentabilidade energética na produção orgânica de hortaliças.

Os insumos e serviços utilizados na produção vegetal representam custo energético. Dependendo desses fatores e das produtividades obtidas, a conversão da produção em energia determinará a eficiência energética do sistema. A agricultura orgânica somente atingirá a missão de preservação ambiental se tiver comprovada sustentabilidade energética. Neste trabalho, objetivou-se caracterizar os balanços energéticos dos cultivos orgânicos e analisar sua sustentabilidade, em comparação aos sistemas convencionais. Monitoraram-se campos de produção de dez culturas, de 1991 a 2000 em Domingos Martins-ES. Os dados do sistema convencional foram obtidos pelas médias dos coeficientes técnicos da região. Quantificaram-se os coeficientes técnicos, convertendo suas grandezas físicas em equivalentes energéticos, expressos em kcal. O sistema orgânico gastou 4.571.159 kcal ha-1 e apresentou 12.696.712 kcal ha-1 de energia inserida na colheita, mostrando balanço médio de 2,78. Esse valor foi similar ao obtido no sistema convencional (1,93). As participações dos componentes nos gastos do sistema orgânico foram embalagem (35,8%), composto orgânico (17,2%), irrigação (12,6%), sementes/mudas (12,4%) e mão-de-obra (11,0%), serviços mecânicos (5,0%) e frete (4,5%). Se os custos com embalagens fossem eliminados, os gastos do sistema orgânico seriam reduzidos para 2.930.113 kcal ha-1, aumentando sua eficiência. A maioria dos cultivos orgânicos pode ser considerada sustentável em transformação de energia, com balanços superiores a 1,00 e produção média diária de 80.421 kcal ha-1 por dia, superior à necessidade mínima de 58.064 kcal ha-1

Natural archives of long-range transported contamination at the remote lake Letšeng-la Letsie, Maloti Mountains, Lesotho

Naturally accumulating archives, such as lake sediments and wetland peats, in remote areas may be used to identify the scale and rates of atmospherically deposited pollutant inputs to natural ecosystems. Co-located lake sediment and wetland cores were collected from Letšeng-la Letsie, a remote lake in the Maloti Mountains of southern Lesotho. The cores were radiometrically dated and analysed for a suite of contaminants including trace metals and metalloids (Hg, Pb, Cu, Ni, Zn, As), fly-ash particles, stable nitrogen isotopes, polycyclic aromatic hydrocarbons (PAHs) and persistent organic pollutants such as polychlorinated biphenyls (PCBs), polybrominated flame retardants (PBDEs) and hexachlorobenzene (HCB). While most trace metals showed no recent enrichment, mercury, fly-ash particles, high molecular weight PAHs and total PCBs showed low but increasing levels of contamination since c.1970, likely the result of long-range transport from coal combustion and other industrial sources in the Highveld region of South Africa. However, back-trajectory analysis revealed that atmospheric transport from this region to southern Lesotho is infrequent and the scale of contamination is low. To our knowledge, these data represent the first palaeolimnological records and the first trace contaminant data for Lesotho, and one of the first multi-pollutant historical records for southern Africa. They therefore provide a baseline for future regional assessments in the context of continued coal combustion in South Africa through to the mid-21st century

EXPANDED BED ADSORPTION OF BROMELAIN (EC 3.4.22.33) FROM Ananas comosus CRUDE EXTRACT

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)This work focuses on the adsorption of Bromelain in expanded bed conditions, such as the adsorption kinetics parameters. The adsorption kinetics parameters showed that after 40 minutes equilibrium was achieved and maximum adsorption capacity was 6.11 U per resin mL. However, the maximum adsorption capacity was only determined by measuring the adsorption isotherm. Only by the Langmuir model the maximum adsorption capacity, Qm, and dissociation constant, kd, values could be estimated as 9.18 U/mL and 0.591, respectively, at 25 degrees C and 0.1 mol/L phosphate buffer pH 7.5. A column made of glass with an inner diameter of 1 cm was used for the expanded bed adsorption (EBA). The residence time was reduced 10 fold by increasing the expansion degree 2.5 times; nonetheless, the plate number (N) value was reduced only 2 fold. After adsorption, the bromelain was eluted in packed bed mode, with a downward flow. The purification factor was about 13 fold and the total protein was reduced 4 fold. EBA showed to be feasible for purification of bromelain.261149157Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq