Conductor losses calculation in two-dimensional simulations of H-plane rectangular waveguides

This paper presents a novel numerical approach to simulate H-plane rectangular-waveguide microwave circuits considering a reduced quasi-2D simulation domain with benefits for computational cost and time. With the aim to evaluate the attenuation of the full height 3D component, we propose a modified expression for the waveguide top/bottom wall conductivity. Numerical 2D simulations are validated against results from full wave 3-D commercial electromagnetic simulator. After a benchmark on a simple straight waveguide model, the method has been successfully applied to an asymmetric un-balanced power splitter, where an accurate power loss prediction is mandatory. Simulation time and memory consumption can be reduced by a factor ten and seven respectively, in comparison with complete 3D geometries. Finally, we show that, also for quasi-2D E-bend waveguide, a case where the translational H-plane symmetry is broken, the error on conductor losses computation is mitigated by our approach since the method remains still valid in a first approximation

A Novel Technique for Fingerprint Classification based on Fuzzy C-Means and Naive Bayes Classifier

Fingerprint classification is a key issue in automatic fingerprint identification systems. One of the main goals is to reduce the item search time within the fingerprint database without affecting the accuracy rate. In this paper, a novel technique, based on topological information, for efficient fingerprint classification is described. The proposed system is composed of two independent modules: the former module, based on Fuzzy C-Means, extracts the best set of training images; the latter module, based on Fuzzy C-Means and Naive Bayes classifier, assigns a class to each processed fingerprint using only directional image information. The proposed approach does not require any image enhancement phase. Experimental trials, conducted on a subset of the free downloadable PolyU database, show a classification rate of 91% over a 100 images test database using only 12 training examples

Current-driven orbital order-disorder transition in LaMnO3

We report significant influence of electric current on the orbital order-disorder transition in LaMnO3. The transition temperature T_OO, thermal hysteresis in the resistivity (rho) versus temperature (T) plot around T_OO, and latent heat L associated with the transition decrease with the increase in current density. Eventually, at a critical current density, L reaches zero. The transition zone, on the other hand, broadens with the increase in current density. The states at ordered, disordered, and transition zone are all found to be stable within the time window from ~10^-3 to ~10^4 seconds.Comment: 7 pages including 5 figures; resolution of Fig.1 is better here than the published versio

Impact of COVID-19 Outbreak on Healthcare Workers in Italy: Results from a National E-Survey

Italy has been the first-hit European country to face the outbreak of coronavirus disease 2019 (COVID-19). Aim of this survey was to assess in depth the impact of the outbreak on healthcare workers (HCW). A 40-item online survey was disseminated via social media inviting Italian HCW, with questions exploring demographics, health status and work environment of respondents. A total of 527 were invited to take part in March 2020, of whom 74% (n = 388) responded to the survey. Of these, 235 (61%) were women. HCW were mostly physicians (74%), from high-prevalence regions (52%). 25% experienced typical symptoms during the last 14 days prior to survey completion, with only 45% of them being tested for COVID-19. Among the tested population, 18 (18%) resulted positive for COVID-19, with 33% being asymptomatic. Only 22% of HCW considered personal protective equipment adequate for quality and quantity. Females and respondents working in high-risk sectors were more likely to rate psychological support as useful (OR, 1.78 [CI 95% 1.14–2.78] P = 0.012, and 2.02 [1.12–3.65] P = 0.020, respectively) and workload as increased (mean increase, 0.38 [0.06–0.69] P = 0.018; and 0.54 [0.16–0.92] P = 0.005, respectively). The insights from this survey may help authorities in countries where COVID-19 epidemic has not yet broken out. Management strategies should be promptly undertaken in order to enhance safety and optimise resource allocation

Electrical current-driven pinhole formation and insulator-metal transition in tunnel junctions

Current Induced Resistance Switching (CIS) was recently observed in thin tunnel junctions (TJs) with ferromagnetic (FM) electrodes and attributed to electromigration of metallic atoms in nanoconstrictions in the insulating barrier. The CIS effect is here studied in TJs with two thin (20 \AA) non-magnetic (NM) Ta electrodes inserted above and below the insulating barrier. We observe resistance (R) switching for positive applied electrical current (flowing from the bottom to the top lead), characterized by a continuous resistance decrease and associated with current-driven displacement of metallic ions from the bottom electrode into the barrier (thin barrier state). For negative currents, displaced ions return into their initial positions in the electrode and the electrical resistance gradually increases (thick barrier state). We measured the temperature (T) dependence of the electrical resistance of both thin- and thick-barrier states ($R_b$ and R$_B$ respectively). Experiments showed a weaker R(T) variation when the tunnel junction is in the $R_b$ state, associated with a smaller tunnel contribution. By applying large enough electrical currents we induced large irreversible R-decreases in the studied TJs, associated with barrier degradation. We then monitored the evolution of the R(T) dependence for different stages of barrier degradation. In particular, we observed a smooth transition from tunnel- to metallic-dominated transport. The initial degradation-stages are related to irreversible barrier thickness decreases (without the formation of pinholes). Only for later barrier degradation stages do we have the appearance of metallic paths between the two electrodes that, however, do not lead to metallic dominated transport for small enough pinhole radius.Comment: 10 pages, 3 figure

Moral Mediators in the Metaverse: Exploring Artificial Morality through a Talking Cricket Paradigm

As technological innovations continue to shape our social interactions, the Metaverse introduces immersive experiences that reflect real-life practices, accessible by users through their avatars. However, these interactions also bring forth potential negative aspects, including discrimination and cyberbullying. While current automatic detection systems exist, educating users on appropriate behaviour remains crucial. Leveraging recent advancements in Artificial Intelligence, the paper focuses on creating virtual AI-controlled moral agents within the Metaverse to guide users in dealing with moral dilemmas. The research aims to understand how such agents impact users' perceptions and behaviours in ethically challenging virtual environments

Time-dependent quantum transport with superconducting leads: a discrete basis Kohn-Sham formulation and propagation scheme

In this work we put forward an exact one-particle framework to study nano-scale Josephson junctions out of equilibrium and propose a propagation scheme to calculate the time-dependent current in response to an external applied bias. Using a discrete basis set and Peierls phases for the electromagnetic field we prove that the current and pairing densities in a superconducting system of interacting electrons can be reproduced in a non-interacting Kohn-Sham (KS) system under the influence of different Peierls phases {\em and} of a pairing field. An extended Keldysh formalism for the non-equilibrium Nambu-Green's function (NEGF) is then introduced to calculate the short- and long-time response of the KS system. The equivalence between the NEGF approach and a combination of the static and time-dependent Bogoliubov-deGennes (BdG) equations is shown. For systems consisting of a finite region coupled to ${\cal N}$ superconducting semi-infinite leads we numerically solve the static BdG equations with a generalized wave-guide approach and their time-dependent version with an embedded Crank-Nicholson scheme. To demonstrate the feasibility of the propagation scheme we study two paradigmatic models, the single-level quantum dot and a tight-binding chain, under dc, ac and pulse biases. We provide a time-dependent picture of single and multiple Andreev reflections, show that Andreev bound states can be exploited to generate a zero-bias ac current of tunable frequency, and find a long-living resonant effect induced by microwave irradiation of appropriate frequency.Comment: 20 pages, 9 figures, published versio

Design and Characterization of Modified Comb Patch Antennas

This work deals with the proposal of a novel type of microstrip antenna, called MCPA the modified comb patch antenna. The proposed antennas is composed of n parallel conductors, fed by a common microstrip. A dedicated mathematical framework, based on the multiconductors transmission line formalism, is proposed for antenna analysis and design. The analytical model is numerically validated with full-wave simulations, resulting in a 5% error in the predicted resonant patch length. A numerical study of antenna matching, size, radiation performance is carried out. The matching increases as the number of conductors increases, whilst gain of comb antennas made of n conductors are about half dB higher than the equivalent full patch counterpart. Then, an eighty conductors was realized and measured to assess the frequency response of the antenna, as well as its radiation performances. An error of 1% between the predicted and measured value resonance frequency was observed. A difference of about 0.67 dB was found for the measured maximum antenna gain, with respect to the simulated one. The proposed antenna design is appealing for printed electronics and wearable, on-textile applications