163 research outputs found
Physical activation of waste-derived materials for biogas cleaning
Biogas produced from biomass is carbon neutral. In fact, the carbon feedstock of biomass is converted into gas phase. Biogas use in high efficient energy systems, such as Solid Oxide Fuel Cells is a viable choice. One of the most important drawbacks for such systems is related to the interaction between trace compounds and anode section. Gas cleaning through physical removal mechanisms is the simplest and cheapest method adopted in the literature. Coupled with this solution, the recovery of waste materials is an efficient application of the circular economy approach. In this work, a physical activation process was investigated experimentally for waste-derived materials at a temperature of 700 °C. The removal of H2S was considered as the most abundant trace compound. Activated biochar showed an adsorption capacity comparable to commercial sorbents, while the performance of ashes are still too poor. An important parameter to be considered is the biogas humidity content that enters in competition with trace compounds that must be removed
Thermal Activation of Digested Sewage Sludges for Carbon Dioxide Removal from Biogas
Anaerobically digested sewage sludges were used as feedstock in the production of activated carbons through physical activation. These char samples were experimentally tested as adsorbents for the removal of CO2 from a simulated biogas mixture. The CO2 concentration level allowed in biomethane was fixed from the European Standards EN 16723-1 and EN 16723-2. The char yield and the subsequent adsorption capacity values were studied, considering the operating parameters of the process. A physical activation process was considered with the following parameters: the temperature, the dwell time, the activating agent, the heating rate, the flow rate, and the method. Among the adsorption tests, the activating temperature and the agent employed affected the CO2 removal. The maximum adsorption capacity was achieved with nitrogen as an activating agent at 600 °C, with 2 h of dwell time (102.5 mg/g)
Composite biomaterials based on sol-gel mesoporous silicate glasses: a review
Bioactive glasses are able to bond to bone and stimulate the growth of new tissue while dissolving over time, which makes them ideal materials for regenerative medicine. The advent of mesoporous glasses, which are typically synthesized via sol-gel routes, allowed researchers to develop a broad and versatile class of novel biomaterials that combine superior bone regenerative potential (compared to traditional melt-derived glasses) with the ability of incorporating drugs and various biomolecules for targeted therapy in situ. Mesoporous glass particles can be directly embedded as a bioactive phase within a non-porous (e.g., microspheres), porous (3D scaffolds) or injectable matrix, or be processed to manufacture a surface coating on inorganic or organic (macro)porous substrates, thereby obtaining hierarchical structures with multiscale porosity. This review provides a picture of composite systems and coatings based on mesoporous glasses and highlights the challenges for the future, including the great potential of inorganic–organic hybrid sol-gel biomaterials
Synthesis and incorporation of rod-like nano-hydroxyapatite into type I collagen matrix: A hybrid formulation for 3D printing of bone scaffolds
Abstract Over the recent years, nanometric hydroxyapatite (HA) has gained interest as constituent of hybrid systems for bone scaffold fabrication, due to its biomimicry and biocompatibility. In this study, rod-like nano-HA particles were introduced in a type I collagen matrix to create a composite mimicking the bone composition. HA nano-rods (40−60 nm × 20 nm) were synthesised by hydrothermal method involving the use of an ammonium-based dispersing agent (Darvan 821-A) and fully characterised. The homogeneous dispersion of HA nanoparticles throughout the final hybrid formulation was achieved through their suspension in a collagen solution in presence of Darvan 821-A. The resulting homogeneous collagen/nano-HA suspension proved to be suitable for extrusion printing applications, showing shear thinning and sol-gel transition upon simil-physiological conditions. Furthermore, mesh-like structures were printed in a gelatine-supporting bath by means of a commercial bioprinter further demonstrating the potential of the designed hybrid system for the fabrication of 3D bone-like scaffolds
Type I Collagen and Strontium-Containing Mesoporous Glass Particles as Hybrid Material for 3D Printing of Bone-Like Materials
Bone tissue engineering offers an alternative promising solution to treat a large number of
bone injuries with special focus on pathological conditions, such as osteoporosis. In this scenario,
the bone tissue regeneration may be promoted using bioactive and biomimetic materials able to
direct cell response, while the desired scaffold architecture can be tailored by means of 3D printing
technologies. In this context, our study aimed to develop a hybrid bioactive material suitable for 3D
printing of scaffolds mimicking the natural composition and structure of healthy bone. Type I collagen
and strontium-containing mesoporous bioactive glasses were combined to obtain suspensions able
to perform a sol-gel transition under physiological conditions. Field emission scanning electron
microscopy (FESEM) analyses confirmed the formation of fibrous nanostructures homogeneously
embedding inorganic particles, whereas bioactivity studies demonstrated the large calcium phosphate
deposition. The high-water content promoted the strontium ion release from the embedded glass
particles, potentially enhancing the osteogenic behaviour of the composite. Furthermore, the
suspension printability was assessed by means of rheological studies and preliminary extrusion tests,
showing shear thinning and fast material recovery upon deposition. In conclusion, the reported
results suggest that promising hybrid systems suitable for 3D printing of bioactive scaffolds for bone
tissue engineering have been developed
Novel multifunctional strontium-copper co-substituted mesoporous bioactive particles
Abstract Sr-Cu co-substituted mesoporous bioactive glasses were synthesized by two different sol-gel approaches: an ultrasound-assisted base-catalyzed sol-gel procedure and an aerosol-assisted spray-drying method. The produced spherical shaped particles showed high specific surface area values and tunable pore size. The two different routes allowed obtaining samples with different morphology and size, characterized by the ability to induce hydroxyapatite deposition, to incorporate a specific amount of therapeutic ions (strontium with the aim to improve bone formation and copper for its antibacterial and pro-angiogenic properties) and to release them. The obtained multifunctional biomaterials synergistically combine the ability to promote bone formation and angiogenesis and to impart an antibacterial effect
Inorganic and Organic-Based Carriers to Vehicle And Release Growth Factors For Bone Regeneration Applications
PEG-coated Mesoporous Silicas to release large biomolecule in Acidic Environment and their use in 3D printed collagen scaffolds
Imaging techniques for the assessment of the bone osteoporosis-induced variations with particular focus on micro-ct potential
For long time, osteoporosis (OP) was exclusively associated with an overall bone mass reduction, leading to lower bone strength and to a higher fracture risk. For this reason, the measurement of bone mineral density through dual X-ray absorptiometry was considered the gold standard method for its diagnosis. However, recent findings suggest that OP causes a more complex set of bone alterations, involving both its microstructure and composition. This review aims to provide an overview of the most evident osteoporosis-induced alterations of bone quality and a résumé of the most common imaging techniques used for their assessment, at both the clinical and the laboratory scale. A particular focus is dedicated to the micro-computed tomography (micro-CT) due to its superior image resolution, allowing the execution of more accurate morphometric analyses, better highlighting the architectural alterations of the osteoporotic bone. In addition, micro-CT has the potential to perform densitometric measurements and finite element method analyses at the microscale, representing potential tools for OP diagnosis and for fracture risk prediction. Unfortunately, technological improvements are still necessary to reduce the radiation dose and the scanning duration, parameters that currently limit the application of micro-CT in clinics for OP diagnosis, despite its revolutionary potential
- …