Lepirudin as an alternative to "heparin allergy" during cardiopulmonary bypass

A treatment strategy of a difficult and unusual problem is presented. We are reporting a case of a patient who had a documented allergy to heparin and required Cardiac surgery for an ASD closure. The anticoagulation regime used during cardiopulmonary bypass was lepirudin based

Towards single particle imaging of human chromosomes at SACLA

Single particle imaging (SPI) is one of the front-page opportunities which were used to motivate the construction of the first x-ray free electron lasers (XFELs). SPI's big advantage is that it avoids radiation damage to biological samples because the diffraction takes place in femtosecond single shots before any atomic motion can take place in the sample, hence before the onset of radiation damage. This is the 'diffract before destruction' theme, destruction being assured from the high x-ray doses used. This article reports our collaboration's first attempt at SPI using the SACLA XFEL facility in June 2015. The report is limited to experience with the instrumentation and examples of data because we have not yet had time to invert them to images.112Ysciescopu

Electronic Origin of High Temperature Superconductivity in Single-Layer FeSe Superconductor

The latest discovery of high temperature superconductivity signature in single-layer FeSe is significant because it is possible to break the superconducting critical temperature ceiling (maximum Tc~55 K) that has been stagnant since the discovery of Fe-based superconductivity in 2008. It also blows the superconductivity community by surprise because such a high Tc is unexpected in FeSe system with the bulk FeSe exhibiting a Tc at only 8 K at ambient pressure which can be enhanced to 38 K under high pressure. The Tc is still unusually high even considering the newly-discovered intercalated FeSe system A_xFe_{2-y}Se_2 (A=K, Cs, Rb and Tl) with a Tc at 32 K at ambient pressure and possible Tc near 48 K under high pressure. Particularly interesting is that such a high temperature superconductivity occurs in a single-layer FeSe system that is considered as a key building block of the Fe-based superconductors. Understanding the origin of high temperature superconductivity in such a strictly two-dimensional FeSe system is crucial to understanding the superconductivity mechanism in Fe-based superconductors in particular, and providing key insights on how to achieve high temperature superconductivity in general. Here we report distinct electronic structure associated with the single-layer FeSe superconductor. Its Fermi surface topology is different from other Fe-based superconductors; it consists only of electron pockets near the zone corner without indication of any Fermi surface around the zone center. Our observation of large and nearly isotropic superconducting gap in this strictly two-dimensional system rules out existence of node in the superconducting gap. These results have provided an unambiguous case that such a unique electronic structure is favorable for realizing high temperature superconductivity

Isolation of a wide range of minerals from a thermally treated plant: Equisetum arvense, a Mare’s tale

Silica is the second most abundant biomineral being exceeded in nature only by biogenic CaCO3. Many land plants (such as rice, cereals, cucumber, etc.) deposit silica in significant amounts to reinforce their tissues and as a systematic response to pathogen attack. One of the most ancient species of living vascular plants, Equisetum arvense is also able to take up and accumulate silica in all parts of the plant. Numerous methods have been developed for elimination of the organic material and/or metal ions present in plant material to isolate biogenic silica. However, depending on the chemical and/or physical treatment applied to branch or stem from Equisetum arvense; other mineral forms such glass-type materials (i.e. CaSiO3), salts (i.e. KCl) or luminescent materials can also be isolated from the plant material. In the current contribution, we show the chemical and/or thermal routes that lead to the formation of a number of different mineral types in addition to biogenic silica

Plutonium in Soils from Northeast China and Its Potential Application for Evaluation of Soil Erosion

Surface and soil core samples from northeast China were analyzed for Pu isotopes. The measured Pu-240/Pu-239 atomic ratios and Pu239 + 240/Cs-137 activity ratios revealed that the global fallout is the dominant source of Pu and Cs-137 at these sites. Migration behavior of Pu varying with land type and human activities resulted in different distribution of Pu in surface soils. A sub-surface maximum followed by exponential decline of Pu239 + 240 concentrations was observed in an undisturbed soil core, with a total Pu239 + 240 inventory of 86.9 Bq/m(2) and more than 85% accumulated in 0 similar to 20 cm layers. While only half inventory of Pu was obtained in another soil core and no sub-surface maximum value occurred. Erosion of topsoil in the site should be the most possible reason for the significantly lower Pu inventory, which is also supported by the reported Cs-137 profiles. These results demonstrated that Pu could be applied as an ideal substitute of Cs-137 for soil erosion study in the future.</p

Membranes by the Numbers

Many of the most important processes in cells take place on and across membranes. With the rise of an impressive array of powerful quantitative methods for characterizing these membranes, it is an opportune time to reflect on the structure and function of membranes from the point of view of biological numeracy. To that end, in this article, I review the quantitative parameters that characterize the mechanical, electrical and transport properties of membranes and carry out a number of corresponding order of magnitude estimates that help us understand the values of those parameters.Comment: 27 pages, 12 figure

Comparison of tonic spinal cord stimulation, high-frequency and burst stimulation in patients with complex regional pain syndrome: a double-blind, randomised placebo controlled trial

BACKGROUND: Complex Regional Pain Syndrome (CRPS) is a disabling disease that is sometimes difficult to treat. Although spinal cord stimulation (SCS) can reduce pain in most patients with CRPS, some do not achieve the desired reduction in pain. Moreover, the pain reduction can diminish over time even after an initially successful period of SCS. Pain reduction can be regained by increasing the SCS frequency, but this has not been investigated in a prospective trial. This study compares pain reduction using five SCS frequencies (standard 40 Hz, 500 Hz, 1200 Hz, burst and placebo stimulation) in patients with CRPS to determine which of the modalities is most effective. DESIGN: All patients with a confirmed CRPS diagnosis that have unsuccessfully tried all other therapies and are eligible for SCS, can enroll in this trial (primary implantation group). CRPS patients that already receive SCS therapy, or those previously treated with SCS but with loss of therapeutic effect over time, can also participate (re-implantation group). Once all inclusion criteria are met and written informed consent obtained, patients will undergo a baseline assessment (T0). A 2-week trial with SCS is performed and, if successful, a rechargeable internal pulse generator (IPG) is implanted. For the following 3 months the patient will have standard 40 Hz stimulation therapy before a follow-up assessment (T1) is performed. Those who have completed the T1 assessment will enroll in a 10-week crossover period in which the five SCS frequencies are tested in five periods, each frequency lasting for 2 weeks. At the end of the crossover period, the patient will choose which frequency is to be used for stimulation for an additional 3 months, until the T2 assessment. DISCUSSION: Currently no trials are available that systematically investigate the importance of variation in frequency during SCS in patients with CRPS. Data from this trial will provide better insight as to whether SCS with a higher frequency, or with burst stimulation, results in more effective pain relief. TRIAL REGISTRATION: Current Controlled Trials ISRCTN3665525

A Simple and Sensitive Method for Measuring Tumor-Specific T Cell Cytotoxicity

A simple and sensitive method to quantitatively measure the cytolytic effect of tumor-specific T killer cells is highly desirable for basic and clinical studies. Chromium (51Cr) release assay has been the “gold standard” for quantifying cytolytic activities of cytotoxic T lymphocytes (CTLs) against target cells and this method is still being used in many laboratories. However, a major drawback of this method is the use of radioactive materials, which is inconvenient to handle because of environmental safety concerns and expensive due to the short half-life of the isotope. Consequently, several nonradioactive methods have been reported recently. Here we report a new method that we recently developed for quantifying antigen-specific cytolytic activity of CTLs. This method fully exploits the high sensitivity and the relative simplicity of luciferase quantitative assay. We initially expected the released luciferase in the supernatant to be the adequate source for monitoring cell death. However, to our total surprise, incubation of these killer T cells with the tumor cell targets did not result in significant release of luciferase in the culture medium. Instead, we found that the remaining luciferase inside the cells could accurately reflect the overall cell viability