Use of Time and Value of Unpaid Family Care Work: a Comparison between Italy and Poland

The study provides a comparison of the size and value of unpaid family care work in two European member States, Italy and Poland. A micro-data analysis is conducted using the Italian and Polish time use surveys. Both the opportunity cost and the market replacement approaches are employed to measure family care work distinguishing between childcare and care of the elderly. The comparison between the two countries reveals that Italians participate somewhat less than Poles in child care, but substantially more in elderly care, because of demographic factors. However, the main explanation of the difference in the value of unpaid family care work, which is higher in Italy, is to be attributed to the discrepancy in hourly earnings, since average earnings of Poles are about one fifth of those of Italians. The value of unpaid family care work is more comparable when computed as percentage of the national GDP. Depending on the approach, it ranges between 3.7 and 4.4 per cent of the Polish GDP and 4.1 and 5 per cent of the Italian GDP. The national values of these activities are discussed and an interpretation of the country differentials in the family caretaking gender gaps is given in terms of differences in culture, economic development and institutions.Time Use, Unpaid Work, Care-giving, Child care, Elderly care, Poland, Italy

As SIMPL as that: introducing a tax-benefit microsimulation model for Poland

The Polish tax and benefit system is presented in the context of a recently developed microsimulation model, SIMPL. The model allows simulating direct taxes, social contributions and public benefits in Poland for the years 2003 and 2005. It is based on the Household Budgets Survey data (Badania Budzetów Gospodarstw Domowych) from 2003 and 2005. The document describes details of the Polish tax and benefit system and the simulation assumptions which were necessary in modelling it in SIMPL. We provide information on the quality of the data used in the model and some details of the validation process through various robustness checks. Finally we provide examples of application of the model for analysis of effects of policy reforms

Use of time and value of unpaid family care work: A comparison between Italy and Poland

This study provides a comparison of the size and value of unpaid family care work in two European member States, Italy and Poland. Using the Italian and Polish time use surveys, both the opportunity cost and the market replacement approaches are employed to separately estimate the value of family childcare and care of the elderly. The results show that, overall, in Italy the number of people performing family care work is higher, also due to the larger population. Italians participate somewhat less than Poles in child care, but substantially more in care of the elderly because of demographic factors. However, the huge difference in the value of unpaid family care work, which in Italy exceeds the value of Poland by about eight times, is largely to be attributed to the discrepancy in hourly earnings, average earnings of Poles being about one fifth of those of Italians. In GDP terms, instead, the value of unpaid family care work is more similar, ranging between 3.7 and 4.4 per cent of the Polish GDP and 4.1 and 5 per cent of the Italian GDP, depending on the estimation approach. The national values of these activities are discussed and an interpretation of the country differentials in the family care-taking gender gaps is given in terms of differences in culture, economic development and institutions

Modification of niobium surfaces using plasma electrolytic oxidation in silicate solutions

Herein, a study of the plasma electrolytic oxidation (PEO) of niobium in an anodising bath composed of potassium silicate (K2SiO3) and potassium hydroxide (KOH) is reported. The effects of the K2SiO3 concentration in the bath and the process voltage on the characteristics of the obtained oxide layers were assessed. Compact, barrier-type oxide layers were obtained when the process voltage did not exceed the breakdown potential of the oxide layer. When this threshold was breached, the morphology of the oxide layer changed markedly, which is typical of PEO. A significant amount of silicon, in the form of amorphous silica, was incorporated into the oxide coatings under these conditions compared with the amount obtained with conventional anodising. This surface modification technique led to an improvement in the corrosion resistance of niobium in Ringer’s solution, regardless of the imposed process conditions

Obstetric opinions regarding the method of delivery in women that have had surgery for retinal detachment

OBJECTIVES: We sought to determine international obstetric opinions regarding the influence of a history of rhegmatogenous retinal detachment on the management of labour and to review the evidence base. DESIGN: A questionnaire containing closed questions, with pre-coded response opinions, was designed to obtain a cross-section of the obstetric opinions. SETTING: Questionnaires were distributed at the 20th European Congress of Obstetrics and Gynaecology in Lisbon, Portugal. PARTICIPANTS: One hundred questionnaires were distributed among obstetricians attending the congress and 74 agreed to participate. MAIN OUTCOME MEASURES: Participants were asked to state their preferred method of delivery in such patients and the reasons for their recommendation. Furthermore, we questioned whether there was any difference in opinions depending on generation. RESULTS: The majority of respondents (76%) would recommend assisted delivery (either Caesarean section or instrumental delivery), whereas the remaining 24% would advise normal delivery. Generation is not a factor influencing this decision. The majority (58%) based their decision to alter the management of labour on their personal opinion of standard of care. CONCLUSION: The literature shows that there is little evidence to support the belief that previous retinal surgery increases the risk of re-detachment of the retina during spontaneous vaginal delivery. This short survey shows that the majority of an international sample of obstetricians questioned does not share this viewpoint. Therefore, unnecessary interventions may be occurring in otherwise fit women with a history of retinal detachment

Influence of Sleeve Gastrectomy on NASH and Type 2 Diabetes Mellitus

Background. Nonalcoholic fatty liver disease is present in up to 85% of adipose patients and may proceed to nonalcoholic steatohepatitis (NASH). With insulin resistance and obesity being the main risk factors for NASH, the effect of isolated sleeve gastrectomy (ISG) on these parameters was examined. Methods. 236 patients underwent ISG with intraoperative liver biopsy from December 2002 to September 2009. Besides demographic data, pre-operative weight/BMI, HbA1c, AST, ALT, triglycerides, HDL and LDL levels were determined. Results. A significant correlation of NASH with higher HbA1c, AST and ALT and lower levels for HDL was observed (P < .05, <.0001, <.0001, <.01, resp.). Overall BMI decreased from 45.0 ± 6.8 to 29.7 ± 6.5 and 31.6 ± 4.4 kg/m2 at 1 and 3 years. An impaired weight loss was demonstrated for patients with NASH and patients with elevated HbA1c (plateau 28.08 kg/m2 versus 29.79 kg/m2 and 32.30 kg/m2 versus 28.79 kg/m2, resp.). Regarding NASH, a significant improvement of AST, ALT, triglyceride and HDL levels was shown (P < .0001 for all). A resolution of elevated HbA1c was observed in 21 of 23 patients. Summary. NASH patients showed a significant loss of body weight and amelioration of NASH status. ISG can be successfully performed in these patients and should be recommended for this subgroup

Reduction of copper slag with the use of carbon granulates

The investigation results on the reduction of slag from flash smelting furnace and the use of carbon granulates obtained from fine-grained waste materials of both the coal enrichment and coking processes have been presented in the paper. The investigation results on the reduction of slag from flash furnace and the use of carbon granulates obtained from fine-grained waste materials of both the coal enrichment and coking processes have been presented in the paper

PMF the front end electronic for the ALFA detector

International audienceThe PMF (Photo Multiplier Front end) is the front end electronics designed for the ATLAS luminometer ALFA (Absolute Luminosity For ATLAS) made of 20 staggered U-V scintillating fiber layers inserted in Roman Pots (eight in total). Each of these plans is made of 64 fibers. The PMF consists of a 64 channels photomultiplier (MAPMT) and a very compact stack of three different PCBs (3x3 cm2), mounted directly on the back and in the shadow of the MAPMT: a board which brings the high voltage to the MAPMT, an intermediate board used to send the signals to connectors located on the edge and, finally, a board with the readout chip MAROC (Multi Anode Read Out Chip), directly bonded on the PCB, on one side and a FPGA on the other. The 64 inputs MAROC ASIC allows correcting for the gain spread of MAPMT channels thanks to a 6 bits variable gain preamplifier. For each channel the signal is shaped (fast shaper, 15ns) and discriminated to produce a trigger output. A multiplexed charge output is also produced both in analog and digital thanks to a Wilkinson ADC. The main requirements are the following: 100 % trigger efficiency for a signal greater than 1/3 of a photoelectron, a charge measurement up to 30 photoelectrons with a linearity of 2 % or better and a cross talk of 1 % or less. The performances of the second version of MAROC were checked successfully during the year 2007 at LAL-Orsay. A nice dispersion of the trigger output (± 5 fC) was, in particular, observed. A sample of PMFs was produced during autumn 2007 as a prototype. Laboratory tests were performed both at LAL and CERN respectively on the third PCB (the one with MAROC) and on a full PMF equipped with a MAPMT illuminated by a LED. They were carried out using dedicated test board and acquisition software and have allowed the approval of the design and the green light for the final production and integration with the detector. Beam tests of a complete Roman Pot, equipped with 23 PMFs, will take place during summer 2008 for two periods and will conclude the test phase and mark the beginning of the final production

Orthogonal methods based ant colony search for solving continuous optimization problems

Research into ant colony algorithms for solving continuous optimization problems forms one of the most significant and promising areas in swarm computation. Although traditional ant algorithms are designed for combinatorial optimization, they have shown great potential in solving a wide range of optimization problems, including continuous optimization. Aimed at solving continuous problems effectively, this paper develops a novel ant algorithm termed "continuous orthogonal ant colony" (COAC), whose pheromone deposit mechanisms would enable ants to search for solutions collaboratively and effectively. By using the orthogonal design method, ants in the feasible domain can explore their chosen regions rapidly and e±ciently. By implementing an "adaptive regional radius" method, the proposed algorithm can reduce the probability of being trapped in local optima and therefore enhance the global search capability and accuracy. An elitist strategy is also employed to reserve the most valuable points. The performance of the COAC is compared with two other ant algorithms for continuous optimization of API and CACO by testing seventeen functions in the continuous domain. The results demonstrate that the proposed COAC algorithm outperforms the others