13,894 research outputs found

    Synchrotron x-ray measurement and finite element analysis of residual strain in TIG welded aluminium alloy 2024

    Get PDF
    Residual strains have been measured in a tungsten inert gas (TIG) butt-welded 2024 aluminum alloy plate using synchrotron X-ray diffraction. Novel two-dimensional strain maps spanning the entire plate reveal steep gradients in residual stress and provide detailed validation data for finite element (FE) analysis. Two variants of a FE model have been used to predict the residual strain distributions, incorporating different levels of plate constraint. The model uses decoupled thermal and elastic- plastic mechanical analyses and successfully predicts the longitudinal and transverse residual strain field over the entire weld. For butt weld geometries, the degree of transverse constraint is shown to be a significant boundary condition, compared to simpler bead-on-plate analyses. The importance of transverse residual strains for detailed model validation is highlighted, together with the need for care in selecting the location for line scans. The residual stress is largest in the heat-affected zone (HAZ), being equal to the local postweld yield stress, though the strength increases subsequently by natural aging. In addition, a halving of the diffraction line width has been observed local to the weld, and this correlates with the microstructural changes in the region

    The Leeway of Shipping Containers at Different Immersion Levels

    Full text link
    The leeway of 20-foot containers in typical distress conditions is established through field experiments in a Norwegian fjord and in open-ocean conditions off the coast of France with wind speed ranging from calm to 14 m/s. The experimental setup is described in detail and certain recommendations given for experiments on objects of this size. The results are compared with the leeway of a scaled-down container before the full set of measured leeway characteristics are compared with a semi-analytical model of immersed containers. Our results are broadly consistent with the semi-analytical model, but the model is found to be sensitive to choice of drag coefficient and makes no estimate of the cross-wind leeway of containers. We extend the results from the semi-analytical immersion model by extrapolating the observed leeway divergence and estimates of the experimental uncertainty to various realistic immersion levels. The sensitivity of these leeway estimates at different immersion levels are tested using a stochastic trajectory model. Search areas are found to be sensitive to the exact immersion levels, the choice of drag coefficient and somewhat less sensitive to the inclusion of leeway divergence. We further compare the search areas thus found with a range of trajectories estimated using the semi-analytical model with only perturbations to the immersion level. We find that the search areas calculated without estimates of crosswind leeway and its uncertainty will grossly underestimate the rate of expansion of the search areas. We recommend that stochastic trajectory models of container drift should account for these uncertainties by generating search areas for different immersion levels and with the uncertainties in crosswind and downwind leeway reported from our field experiments.Comment: 25 pages, 11 figures and 5 tables; Ocean Dynamics, Special Issue on Advances in Search and Rescue at Sea (2012

    A Computational and Experimental Compressor Design Project for Japanese and British High-School Students

    Get PDF
    This paper describes an innovative, three-day, turbomachinery research project for Japanese and British high-school students. The project is structured using modern teaching theories which encourage student curiosity and creativity. The experience develops team-work and communication, and helps to break-down cultural and linguistic barriers between students from different countries and backgrounds. The approach provides a framework for other hands-on research projects which aim to inspire young students to undertake a career in engineering. The project is part of the Clifton Scientific Trust's annual UK-Japan Young Scientist Workshop Programme. The work focuses on compressor design for jet engines and gas turbines. It includes lectures introducing students to turbomachinery concepts, a computational design study of a compressor blade section, experimental tests with a low-speed cascade and tutorials in data analysis and aerodynamic theory. The project also makes use of 3D printing technology, so that students go through the full engineering design process, from theory, through design, to practical experimental testing. Alongside the academic aims, students learn what it is like to study engineering at university, discover how to work effectively in a multinational team, and experience a real engineering problem. Despite a lack of background in fluid dynamics and the limited time available, the lab work and end of project presentation show how far young students can be stretched when they are motivated by an interesting problem

    The role of concepts in Kant's account of aesthetic experience

    Get PDF
    The thesis begins by exploring Kant's account of cognition as it is presented within the Critique of Pure Reason, particularly with reference to the conceptualist/non-conceptualist debate as it has developed over recent years. I argue that there is an important non-conceptualist position within Kant's account that concerns the unity of space and time as non-conceptual intuitive wholes. This argument will be used in discussing and exploring Kant's account of both aesthetic receptivity and aesthetic creativity as presented within the Critique of Judgement. My exploration of this third Critique will begin by looking at Kant's account of the harmony of the faculties and how we should understand the sense in which our aesthetic response is a non-conceptually determined one. The same concern will apply to an analysis of Kant's account of the mathematical sublime, and in the later stages of this discussion we will find an interesting relation between Kant's account of the role of infinity (space and time as unified wholes), and our earlier argument concerning space and time as formal intuitive wholes. After this focus upon the conditions of aesthetic receptivity my focus shifts towards aesthetic creativity as presented in Kant's account of fine art and genius. The main focus here will be with Kant's remark that art, in order to be art, must seem like nature. I will argue that this statement must be understood in two interdependent ways, where the first element concerns the formal construction of a representation so that it looks like nature in the sense of being a unified and readable representation. I will argue that artistic creativity at this level is the precondition of the second sense in which art must seem like nature, which concerns the content of a representation, and that a non-conceptual intuitional base is essential to this end

    Systemic amyloidosis in England: an epidemiological study.

    Get PDF
    Epidemiological studies of systemic amyloidosis are scarce and the burden of disease in England has not previously been estimated. In 1999, the National Health Service commissioned the National Amyloidosis Centre (NAC) to provide a national clinical service for all patients with amyloidosis. Data for all individuals referred to the NAC is held on a comprehensive central database, and these were compared with English death certificate data for amyloidosis from 2000 to 2008, obtained from the Office of National Statistics. Amyloidosis was stated on death certificates of 2543 individuals, representing 0·58/1000 recorded deaths. During the same period, 1143 amyloidosis patients followed at the NAC died, 903 (79%) of whom had amyloidosis recorded on their death certificates. The estimated minimum incidence of systemic amyloidosis in the English population in 2008, based on new referrals to the NAC, was 0·4/100 000 population. The incidence peaked at age 60-79 years. Systemic AL amyloidosis was the most common type with an estimated minimum incidence of 0·3/100 000 population. Although there are various limitations to this study, the available data suggest the incidence of systemic amyloidosis in England exceeds 0·8/100 000 of the population

    Apparent mass of small children: Experimental measurements

    Get PDF
    A test facility and protocol were developed for measuring the seated, vertical, whole-body vibration response of small children of less than 18 kg in mass over the frequency range from 1 to 45 Hz. The facility and protocol adhered to the human vibration testing guidelines of BS7085 and to current codes of ethics for research involving children. Additional procedures were also developed which are not currently defined in the guidelines, including the integral involvement of the parents and steps taken to maximize child happiness. Eight children were tested at amplitudes of 0.8 and 1.2 m/s2 using band-limited, Gaussian, white noise acceleration signals defined over the frequency interval from 1 to 50 Hz. Driving point apparent mass modulus and phase curves were determined for all eight children at both test amplitudes. All results presented a single, principal, anti-resonance, and were similar to data reported for primates and for adult humans seated in an automotive posture which provided backrest support. The mean frequency of the apparent mass peak was 6.25 Hz for the small children, as compared to values between 6.5 - 8.5 Hz for small primates and values between 6.5 - 8.6 Hz for adults seated with backrest support. The peak value of the mean, normalized, apparent mass was 1.54 for the children, which compares to values from 1.19 to 1.45 reported in the literature for small primates and 1.28 for adults seated with backrest support. ISO standard 5982, which specifies a mean, normalized, apparent mass modulus peak of 1.50 at a frequency of 4.0 Hz for adults seated without backrest support, provides significant differences

    Assessment of best single sample for finding chlamydia in women with and without symptoms: a diagnostic test study

    Get PDF
    Objective: to compare vulvovaginal swabs with endocervical swabs as optimal diagnostic sample for detection of Chlamydia trachomatis infection. Design: a diagnostic test study. Setting: an urban sexual health centre. Participants: 3973 women aged ≥16 years requesting testing for sexually transmitted infections. Interventions: participants took a vulvovaginal swab before routine examination, and clinicians took an endocervical swab during examination. Main outcome measure: diagnosis of chlamydia infection with samples analysed using the Aptima Combo-2 assay; positive results confirmed with the Aptima CT assay. Results: of the 3973 participants, 410 (10.3%) were infected with C trachomatis. Infected women were significantly younger (22 v 25 years, P<0.0001) and more likely to have symptoms suggestive of a bacterial sexually transmitted infection (53% v 41%, odds ratio 1.63 (95% CI 1.30 to 2.04)), be a contact of someone with a sexually transmitted infection (25% v 5%, odds ratio 6.18 (4.61 to 8.30)), clinically diagnosed with cervicitis (17% v 4%, odds ratio 4.92 (3.50 to 6.91)), and have pelvic inflammatory disease (9% v 3%, odds ratio 2.85 (1.87 to 4.33)). When women co-infected with gonorrhoea were included in the analysis, there was an association with mixed ethnicity (10% v 7%, odds ratio 1.53 (1.07 to 2.17)); but when those with gonorrhoea were removed, women of white ethnicity were significantly more likely to have chlamydia (85% v 80%, odds ratio 1.40 (1.03 to 1.91)). On analysis of complete paired results, vulvovaginal swabs were significantly more sensitive than endocervical swabs (97% (95% CI 95% to 98%) v 88% (85% to 91%), P<0.00001); corresponding specificities were 99.9% and 100%. In women with symptoms suggestive of a bacterial sexually transmitted infection, vulvovaginal swabs were significantly more sensitive than endocervical swabs (97% (93% to 98%) v 88% (83% to 92%), P=0.0008), as they were in women without symptoms (97% (94% to 99%) v 89% (84% to 93%), P=0.002). Conclusions: vulvovaginal swabs are significantly better than endocervical swabs at detecting chlamydia in women with and without symptoms suggestive of sexually transmitted infections. In those with symptoms, using endocervical samples rather than vulvovaginal swabs would have missed 9% of infections, or 1 in every 11 cases of chlamydia
    corecore