3,512 research outputs found
Guidelines for Developing a Place-Based Unit
Guidelines for developing a place-based ed unit. Here are some preliminary ideas I was able to brainstorm responses to how some of the place-based unit development guidelines could be addressed while creating curriculum about La Sal del Rey
A Continuous Non-demolition Measurement of the Cs Clock Transition Pseudo-spin
We demonstrate a weak continuous measurement of the pseudo-spin associated
with the clock transition in a sample of Cs atoms. Our scheme uses an optical
probe tuned near the D1 transition to measure the sample birefringence, which
depends on the z-component of the collective pseudospin. At certain probe
frequencies the differential light shift of the clock states vanishes and the
measurement is non-perturbing. In dense samples the measurement can be used to
squeeze the collective clock pseudo-spin, and has potential to improve the
performance of atomic clocks and interferometers.Comment: 4 pages, 4 figures, ReVTeX, modified text in response to referee's
comment
Defining the risk of human exposure to Australian bat lyssavirus through potential non-bat animal infection
Human infection with Australian bat lyssavirus (ABLV) was first reported in November 1996, six months after the first identification of the virus in a flying fox in May 1996. Only two human cases of ABLV infection have been described to date, although hundreds of potential human exposures to ABLV have been reported. Current public health guidance considers the risk of transmission of ABLV from a dog or cat to a person is very low. Furthermore, owners are advised that although the animal has a remote possibility of being infected with ABLV, it should be observed closely for at least three months and to report any behavioural changes that occur. The authors present two cases where the behaviour of dogs after potential exposure to ABLV posed significant questions for veterinary and public health authorities
COTS MEMS Flow-Measurement Probes
As an alternative to conventional tubing instrumentation for measuring airflow, designers and technicians at Glenn Research Center have been fabricating packaging components and assembling a set of unique probes that contain commercial off-the-shelf (COTS) microelectromechanical systems (MEMS) sensor chips. MEMS sensor chips offer some compelling advantages over standard macroscopic measurement devices. MEMS sensor technology has matured through mass production and use in the automotive and aircraft industries. At present, MEMS are the devices of choice for sensors in such applications as tire-pressure monitors, altimeters, pneumatic controls, cable leak detectors, and consumer appliances. Compactness, minimality of power demand, rugged construction, and moderate cost all contribute to making MEMS sensors attractive for instrumentation for future research. Conventional macroscopic flow-measurement instrumentation includes tubes buried beneath the aerodynamic surfaces of wind-tunnel models or in wind-tunnel walls. Pressure is introduced at the opening of each such tube. The pressure must then travel along the tube before reaching a transducer that generates an electronic signal. The lengths of such tubes typically range from 20 ft (approx.= 6 m) to hundreds of feet (of the order of 100 m). The propagation of pressure signals in the tubes damps the signals considerably and makes it necessary to delay measurements until after test rigs have reached steady-state operation. In contrast, a MEMS pressure sensor that generates electronic output can take readings continuously under dynamic conditions in nearly real time. In order to use stainless-steel tubing for pressure measurements, it is necessary to clean many tubes, cut them to length, carefully install them, delicately deburr them, and splice them. A cluster of a few hundred 1/16-in.- (approx.=1.6-mm-) diameter tubes (such clusters are common in research testing facilities) can be several inches (of the order of 10 cm) in diameter and could weigh enough that two technicians are needed to handle it. Replacing hard tubing with electronic chips can eliminate much of the bulk. Each sensor would fit on the tip of a 1/16-in. tube with room to spare. The Lucas NovaSensor P592 piezoresistive silicon pressure sensor was chosen for this project because of its cost, availability, and tolerance to extreme ambient conditions. The sensor chip is 1 mm square by 0.6 mm thick (about 0.039 by 0.039 by 0.024 in.) and includes 0.12-mm (approx.=0.005-in.) wire connection tabs. The figure shows a flow-angularity probe that was built by use of three such MEMS chips. It is planned to demonstrate this MEMS probe as an alternative to a standard tube-type "Cobra" probe now used routinely in wind tunnels and aeronautical hardware. This MEMS probe could be translated across a flow field by use of a suitable actuator, so that its accuracy and the shortness of its response time could be exploited to obtain precise dynamic measurements of a sort that cannot be made by use of conventional tubing-based instrumentation
A Reduced–Cost Mechanized System for Handling and Curing Mechanically–Harvested Burley Tobacco
An experimental system was tested in which mechanically harvested burley tobacco plants placed onto steel slotted receivers were retrieved from a field, transported to a field curing structure, and placed onto the structure for air curing by a single worker. The system consisted of a tractor–towed, trailer mechanism that engaged and hoisted loads of approximately 360 burley plants of approximately 1 Mg mass. Ten slotted steel rails, 3.05 m long, holding 36 notched plants were placed onto parallel wooden beams suspended at a height of 2.13 m by wooden posts set in the ground. Burley tobacco was cured in this configuration covered by polyethylene.
Time–and–motion experiments showed that the system could retrieve tobacco from the field and place it onto a curing structure adjacent to the field at the rate of 0.1 to 0.18 ha/h. Replicated experiments also showed that the system operated with negligible leaf loss due to handling. Finally, experimental results showed that leaf grade index decreased with time that filled tobacco rails were left lying on the ground after being harvested and prior to being retrieved. This study further indicated that the estimated cost of the proposed harvesting system compares favorably with systems that require several manual laborers
Sucrose density gradient centrifugation and cross-flow filtration methods for the production of arbovirus antigens inactivated by binary ethylenimine
BACKGROUND: Sucrose density gradient centrifugation and cross-flow filtration methods have been developed and standardised for the safe and reproducible production of inactivated arbovirus antigens which are appropriate for use in diagnostic serological applications. METHODS: To optimise the maximum titre of growth during the propagation of arboviruses, the multiplicity of infection and choice of cell line were investigated using stocks of Ross River virus and Barmah Forest virus grown in both mosquito and mammalian cell lines. To standardise and improve the efficacy of the inactivation of arboviral suspensions, stocks of Ross River virus, Barmah Forest virus, Japanese encephalitis virus, Murray Valley encephalitis virus and Alfuy virus were chemically inactivated using binary ethylenimine at a final concentration of 3 mM. Aliquots were then taken at hourly intervals and crude inactivation rates were determined for each virus using a plaque assay. To ensure complete inactivation, the same aliquots were each passaged 3 times in Aedes albopictus C6/36 cells and the presence of viral growth was detected using an immunofluorescent assay. For larger quantities of viral suspensions, centrifugation on an isopycnic sucrose density gradient or cross-flow filtration was used to produce concentrated, pure antigens or partially concentrated, semi-purified antigens respectively. RESULTS: The results of the propagation experiments suggested that the maximum viral titres obtained for both Ross River virus and Barmah Forest virus were affected by the incubation period and choice of cell line, rather than the use of different multiplicity of infection values. Results of the binary ethylenimine inactivation trial suggested that standardised periods of 5 or 8 hours would be suitable to ensure effective and complete inactivation for a number of different arboviral antigens. CONCLUSION: Two methods used to prepare inactivated arbovirus antigens have been standardised to minimise production failure and expenditure and to provide reagents that conform to the highest quality and safety requirements of a diagnostic serology laboratory. The antigens are suitable for use in either enzyme linked immunosorbent assays or haemagglutination inhibition assays and the optimised protocols can be directly applied to produce antigens from new or emerging arboviral pathogens
Shadow IT Use, Outcome Effects, and Subjective Performance Evaluation
Using shadow IT may be seen as either a form of organizational misbehavior or proactive and creative problem-solving. These perceptions have implications for the subjective evaluation of subordinate performance. In our experiment, participants choose whether to award a bonus to an employee when different IT systems are used across different outcome levels. We find that employees using shadow IT are less likely to receive the bonus in both high and low outcome conditions relative to employees using the normal IT system, suggesting that managers consider shadow IT usage an organizational misbehavior which casts a negative light on employee performance
Using the factors of soil formation to assess stable carbon isotope disequilibrium in late Pleistocene (MIS 3) buried soils of the Great Plains, North America
The stable carbon isotope composition of both soil organic matter (SOM) and pedogenic carbonate are widely used as paleoenvironmental proxies. This study utilizes δ13C analyses to reconstruct bioclimatic change from a series of buried soils in the central Great Plains of North America that developed between ca. 44–24 ka. Results revealed a paradoxical isotopic disequilibrium between the isotopic composition of bulk SOM (δ13CSOM) and pedogenic carbonate (δ13Ccarb). Specifically, Δ13C values are 0.1 to 6.3 per mil greater than the highest expected equilibrium value of 17 per mil in the Bk horizons. In contrast, Δ13C values are 0.1 to 4.8 per mil lower than the lowest expected equilibrium value of 14 per mil in the Ak horizons. A soil-forming factor approach was utilized to establish multiple working hypotheses regarding the influence of climate, vegetation, parent material, and time on the observed isotopic disequilibrium.
Of the various hypotheses presented, we suggest that the following most likely explain the observed isotopic disequilibrium. The greater-than-expected Δ13C values in the Bk horizons most likely reflects seasonal bias in pedogenic carbonate formation, resulting in an apparent C4-biased signal. The lower-than-expected Δ13C values in the Ak horizons remains perplexing. The most likely explanation is that detrital carbonate contributions affected the δ13Ccarb record or that the δ13Ccarb and δ13CSOM records are asynchronous. Overall, it appears that different factors have affected the δ13CSOM and δ13Ccarb records independently and therefore results of this study highlight the importance of assessing pedogenic carbonates for isotopic equilibrium as well as the need to understand past environmental conditions (i.e., soil-forming factors) when interpreting isotopic trends
Public Health Surveillance for Australian bat lyssavirus in Queensland, Australia, 2000–2001
From February 1, 2000, to December 4, 2001, a total of 119 bats (85 Megachiroptera and 34 Microchiroptera) were tested for Australian bat lyssavirus (ABLV) infection. Eight Megachiroptera were positive by immunofluorescence assay that used cross-reactive antibodies to rabies nucleocapsid protein. A case study of cross-species transmission of ABLV supports the conclusion that a bat reservoir exists for ABLV in which the virus circulates across Megachiroptera species within mixed communities
- …