14 research outputs found
Construction and Performance of Large-Area Triple-GEM Prototypes for Future Upgrades of the CMS Forward Muon System
At present, part of the forward RPC muon system of the CMS detector at the
CERN LHC remains uninstrumented in the high-\eta region. An international
collaboration is investigating the possibility of covering the 1.6 < |\eta| <
2.4 region of the muon endcaps with large-area triple-GEM detectors. Given
their good spatial resolution, high rate capability, and radiation hardness,
these micro-pattern gas detectors are an appealing option for simultaneously
enhancing muon tracking and triggering capabilities in a future upgrade of the
CMS detector. A general overview of this feasibility study will be presented.
The design and construction of small (10\times10 cm2) and full-size trapezoidal
(1\times0.5 m2) triple-GEM prototypes will be described. During detector
assembly, different techniques for stretching the GEM foils were tested.
Results from measurements with x-rays and from test beam campaigns at the CERN
SPS will be shown for the small and large prototypes. Preliminary simulation
studies on the expected muon reconstruction and trigger performances of this
proposed upgraded muon system will be reported.Comment: 7 pages, 25 figures, submitted for publication in conference record
of the 2011 IEEE Nuclear Science Symposium, Valencia, Spai
An overview of the design, construction and performance of large area triple-GEM prototypes for future upgrades of the CMS forward muon system
GEM detectors are used in high energy physics experiments given their good spatial resolution, high rate capability and radiation hardness. An international collaboration is investigating the possibility of covering the 1.6 < vertical bar eta vertical bar < 2.4 region of the CMS muon endcaps with large-area triple-GEM detectors. The CMS high-eta area is actually not fully instrumented, only Cathode Strip Chamber (CSC) are installed. The vacant area presents an opportunity for a detector technology able to to cope with the harsh radiation environment; these micropattern gas detectors are an appealing option to simultaneously enhance muon tracking and triggering capabilities in a future upgrade of the CMS detector. A general overview of this feasibility study is presented. Design and construction of small (10cm x 10cm) and full-size trapezoidal (1m x 0.5m) triple-GEM prototypes is described. Results from measurements with x-rays and from test beam campaigns at the CERN SPS is shown for the small and large prototypes. Preliminary simulation studies on the expected muon reconstruction and trigger performances of this proposed upgraded muon system are reported
Test beam results of the GE1/1 prototype for a future upgrade of the CMS high-η muon system
Gas Electron Multipliers (GEM) are an interesting technology under consideration for the future upgrade of the forward region of the CMS muon system, specifically in the 1.6 < vertical bar eta vertical bar < 2.4 endcap region. With a sufficiently fine segmentation GEMs can provide precision tracking as well as fast trigger information. The main objective is to contribute to the improvement of the CMS muon trigger. The construction of large-area GEM detectors is challenging both from the technological and production aspects. In view of the CMS upgrade we have designed and built the largest full-size Triple-GEM muon detector, which is able to meet the stringent requirements given the hostile environment at the high-luminosity LHC. Measurements were performed during several test beam campaigns at the CERN SPS in 2010 and 2011. The main issues under study are efficiency, spatial resolution and timing performance with different inter-electrode gap configurations and gas mixtures. In this paper results of the performance of the prototypes at the beam tests will be discussed
Test beam results of the GE1/1 prototype for a future upgrade of the CMS high- muon system
Gas Electron Multipliers (GEM) are an interesting technology under
consideration for the future upgrade of the forward region of the CMS muon
system, specifically in the endcap region. With a
sufficiently fine segmentation GEMs can provide precision tracking as well as
fast trigger information. The main objective is to contribute to the
improvement of the CMS muon trigger. The construction of large-area GEM
detectors is challenging both from the technological and production aspects. In
view of the CMS upgrade we have designed and built the largest full-size
Triple-GEM muon detector, which is able to meet the stringent requirements
given the hostile environment at the high-luminosity LHC. Measurements were
performed during several test beam campaigns at the CERN SPS in 2010 and 2011.
The main issues under study are efficiency, spatial resolution and timing
performance with different inter-electrode gap configurations and gas mixtures.
In this paper results of the performance of the prototypes at the beam tests
will be discussed
Performance studies of large-area triple-GEM prototypes for future upgrades of the CMS forward muon system
The RPC muon system of the CMS detector at the CERN LHC remains uninstrumented in the
pseudorapidity region 1.6<|η|<2.4. An ongoing project aims at covering the region of the muon
endcaps with large-area triple-GEM detectors whose features are suited to enhance muon tracking
and preserve triggering capabilities for the CMS detector upgrade. The design and assembling
of small (10 cm × 10 cm) and full-size trapezoidal (1 m × 0.5 m) triple-GEM prototypes will be
described. The prototypes have been tested with soft x-rays and with a pion/muon test beam
at the CERN SPS. Results from measurements with different experimental set-up on detector
resolution and efficiency as well as timing performance will be reported. Preliminary simulation
results will be discussed, related to studies on performance variations of the expected muon tracks
reconstruction and trigger performance for different upgraded muon system scenarios
Construction and performance of full scale gem prototypes for future upgrades of the CMS forward muon system
In the prospect of an upgrade of the CMS Experiment, an international collaboration is performing feasibility studies on employing large-area triple-GEM detectors for the high-η region (1.6-2.4) of the CMS Endcap, which is currently not instrumented. Given their good spatial resolution, high rate capability, and radiation hardness, these micro-pattern gas detectors are an appealing option for simultaneously enhancing muon tracking and triggering capabilities in this region. A detailed review of the development and characterization of small and full-size (1m x 0.5m) prototypes will be presented. These full-size GEM foils are produced using a novel single-mask etching technique developed at CERN. In addition, we discuss the performance of a full-size trapezoidal triple-GEM detector in a strong magnetic field during a dedicated beam test campaign to address CMS requirements on the detectors
Effect of mixing sago (Metroxylon sagu), waste water and peat soil water on minimizing ammonia volatilization and improvement in nutrient use efficiency of maize (Zea mays L.).
The CMS GEM collaboration is considering Gas Electron Multipliers (GEMs) for upgrading the CMS forward muon system in the 1.5<|eta|<2.4 endcap region. GEM detectors can provide precision tracking and fast trigger information. They would improve the CMS muon trigger and muon momentum resolution and provide missing redundancy in the high-eta region. Employing a new faster construction and assembly technique, we built four full-scale Triple-GEM muon detectors for the inner ring of the first muon endcap station. We plan to install these or further improved versions in CMS during the first long LHC shutdown in 2013/14 for continued testing. These detectors are designed for the stringent rate and resolution requirements in the increasingly hostile environments expected at CMS after the second long LHC shutdown in 2018/19. The new prototypes were studied in muon/pion beams at the CERN SPS. We discuss our experience with constructing the new full-scale production prototypes and present preliminary performance results from the beam test. We also tested smaller Triple-GEM prototypes with zigzag readout strips with 2 mm pitch in these beams and measured a spatial resolution of 73 microns. This readout offers a potential reduction of channel count and consequently electronics cost for this system while maintaining high spatial resolution