729 research outputs found
Using bond-length dependent transferable force constants to predict vibrational entropies in Au-Cu, Au-Pd, and Cu-Pd alloys
A model is tested to rapidly evaluate the vibrational properties of alloys
with site disorder. It is shown that length-dependent transferable force
constants exist, and can be used to accurately predict the vibrational entropy
of substitutionally ordered and disordered structures in Au-Cu, Au-Pd, and
Cu-Pd. For each relevant force constant, a length- dependent function is
determined and fitted to force constants obtained from first-principles
pseudopotential calculations. We show that these transferable force constants
can accurately predict vibrational entropies of L1-ordered and disordered
phases in CuAu, AuPd, PdAu, CuPd, and PdAu. In
addition, we calculate the vibrational entropy difference between
L1-ordered and disordered phases of AuCu and CuPt.Comment: 9 pages, 6 figures, 3 table
A participatory physical and psychosocial intervention for balancing the demands and resources among industrial workers (PIPPI): study protocol of a cluster-randomized controlled trial
Background: Need for recovery and work ability are strongly associated with high employee turnover, well-being and sickness absence. However, scientific knowledge on effective interventions to improve work ability and decrease need for recovery is scarce. Thus, the present study aims to describe the background, design and protocol of a cluster randomized controlled trial evaluating the effectiveness of an intervention to reduce need for recovery and improve work ability among industrial workers. Methods/Design: A two-year cluster randomized controlled design will be utilized, in which controls will also receive the intervention in year two. More than 400 workers from three companies in Denmark will be aimed to be cluster randomized into intervention and control groups with at least 200 workers (at least 9 work teams) in each group. An organizational resources audit and subsequent action planning workshop will be carried out to map the existing resources and act upon initiatives not functioning as intended. Workshops will be conducted to train leaders and health and safety representatives in supporting and facilitating the intervention activities. Group and individual level participatory visual mapping sessions will be carried out allowing team members to discuss current physical and psychosocial work demands and resources, and develop action plans to minimize strain and if possible, optimize the resources. At all levels, the intervention will be integrated into the existing organization of work schedules. An extensive process and effect evaluation on need for recovery and work ability will be carried out via questionnaires, observations, interviews and organizational data assessed at several time points throughout the intervention period. Discussion: This study primarily aims to develop, implement and evaluate an intervention based on the abovementioned features which may improve the work environment, available resources and health of industrial workers, and hence their need for recovery and work ability
Charge redistribution at Pd surfaces: ab initio grounds for tight-binding interatomic potentials
A simplified tight-binding description of the electronic structure is often
necessary for complex studies of surfaces of transition metal compounds. This
requires a self-consistent parametrization of the charge redistribution, which
is not obvious for late transition series elements (such as Pd, Cu, Au), for
which not only d but also s-p electrons have to be taken into account. We show
here, with the help of an ab initio FP-LMTO approach, that for these elements
the electronic charge is unchanged from bulk to the surface, not only per site
but also per orbital. This implies different level shifts for each orbital in
order to achieve this orbital neutrality rule. Our results invalidate any
neutrality rule which would allow charge redistribution between orbitals to
ensure a common rigid shift for all of them. Moreover, in the case of Pd, the
power law which governs the variation of band energy with respect to
coordination number, is found to differ significantly from the usual
tight-binding square root.Comment: 6 pages, 2 figures, Latex; Phys.Rev. B 56 (1997
Pressure Dependence of the Elastic Moduli in Aluminum Rich Al-Li Compounds
I have carried out numerical first principles calculations of the pressure
dependence of the elastic moduli for several ordered structures in the
Aluminum-Lithium system, specifically FCC Al, FCC and BCC Li, L1_2 Al_3Li, and
an ordered FCC Al_7Li supercell. The calculations were performed using the full
potential linear augmented plane wave method (LAPW) to calculate the total
energy as a function of strain, after which the data was fit to a polynomial
function of the strain to determine the modulus. A procedure for estimating the
errors in this process is also given. The predicted equilibrium lattice
parameters are slightly smaller than found experimentally, consistent with
other LDA calculations. The computed elastic moduli are within approximately
10% of the experimentally measured moduli, provided the calculations are
carried out at the experimental lattice constant. The LDA equilibrium shear
modulus C11-C12 increases from 59.3 GPa in Al, to 76.0 GPa in Al_7Li, to 106.2
GPa in Al_3Li. The modulus C_44 increases from 38.4 GPa in Al to 46.1 GPa in
Al_7Li, then falls to 40.7 GPa in Al_3Li. All of the calculated elastic moduli
increase with pressure with the exception of BCC Li, which becomes elastically
unstable at about 2 GPa, where C_11-C_12 vanishes.Comment: 17 pages (REVTEX) + 7 postscript figure
[18F]FDG and [18F]NaF as PET markers of systemic atherosclerosis progression:A longitudinal descriptive imaging study in patients with type 2 diabetes mellitus
BACKGROUND: While [18F]-fluordeoxyglucose ([18F]FDG) uptake is associated with arterial inflammation, [18F]-sodium fluoride ([18F]NaF) is a marker for arterial micro-calcification. We aimed to investigate the prospective correlation between both PET markers over time and whether they are prospectively ([18F]FDG) and retrospectively ([18F]NaF) related to progression of systemic arterial disease in a longitudinal study in patients with type 2 diabetes mellitus (T2DM). METHODS: Baseline [18F]FDG PET/Low Dose (LD) Computed Tomography (CT) scans of ten patients with early T2DM without cardiovascular history (70% men, median age 63 years) were compared with five-year follow-up [18F]NaF/LDCT scans. Systemic activity was expressed as mean target-to-background ratio (meanTBR) by dividing the maximal standardized uptake value (SUVmax) of ten arteries by SUVmean of the caval vein. CT-assessed macro-calcifications were scored visually and expressed as calcified plaque (CP) score. Arterial stiffness was assessed with carotid-femoral pulse wave velocity (PWV). Five-year changes were expressed absolutely with delta (Δ) and relatively with %change. RESULTS: Baseline meanTBR[18F]FDG was strongly correlated with five-year follow-up meanTBR[18F]NaF (r = 0.709, P = .022). meanTBR[18F]NaF correlated positively with ΔCPscore, CPscore at baseline, and follow-up (r = 0.845, P = .002 and r = 0.855, P = .002, respectively), but not with %change in CPscore and PWV. CONCLUSION: This proof-of-concept study demonstrated that systemic arterial inflammation is an important pathogenetic factor in systemic arterial micro-calcification development
Improving simultaneous saccharification and co-fermentation of pretreated wheat straw using both enzyme and substrate feeding
<p>Abstract</p> <p>Background</p> <p>Simultaneous saccharification and co-fermentation (SSCF) has been recognized as a feasible option for ethanol production from xylose-rich lignocellulosic materials. To reach high ethanol concentration in the broth, a high content of water-insoluble solids (WIS) is needed, which creates mixing problems and, furthermore, may decrease xylose uptake. Feeding of substrate has already been proven to give a higher xylose conversion than a batch SSCF. In the current work, enzyme feeding, in addition to substrate feeding, was investigated as a means of enabling a higher WIS content with a high xylose conversion in SSCF of a xylose-rich material. A recombinant xylose-fermenting strain of <it>Saccharomyces cerevisiae </it>(TMB3400) was used for this purpose in fed-batch SSCF experiments of steam-pretreated wheat straw.</p> <p>Results</p> <p>By using both enzyme and substrate feeding, the xylose conversion in SSCF could be increased from 40% to 50% in comparison to substrate feeding only. In addition, by this design of the feeding strategy, it was possible to process a WIS content corresponding to 11% in SSCF and obtain an ethanol yield on fermentable sugars of 0.35 g g<sup>-1</sup>.</p> <p>Conclusion</p> <p>A combination of enzyme and substrate feeding was shown to enhance xylose uptake by yeast and increase overall ethanol yield in SSCF. This is conceptually important for the design of novel SSCF processes aiming at high-ethanol titers. Substrate feeding prevents viscosity from becoming too high and thereby allows a higher total amount of WIS to be added in the process. The enzyme feeding, furthermore, enables keeping the glucose concentration low, which kinetically favors xylose uptake and results in a higher xylose conversion.</p
Is Workstyle a Mediating Factor for Pain in the Upper Extremity Over Time?
Introduction Upper extremity musculoskeletal disorders influence workers’ quality of life. Workstyle may be one factor to deal with in workers with pain in the upper extremity. The objective of this study was to determine if workstyle is a mediating factor for upper extremity pain in a changing work environment of office workers over time. Methods Office workers with upper extremity pain filled out a Workstyle questionnaire (WSF) at baseline (n = 110). After 8 and 12 months follow-up assessment took place. Participants were divided into a good and an adverse workstyle group at baseline. The presence of upper extremity pain in both groups was calculated and relative risks were determined. Chi-square tests were used. Results Eight months after baseline, 80% of the adverse and 45% of the good workstyle group reported pain. The relative risk (RR) of having upper extremity pain for the adverse compared to the good workstyle group was 1.8 (95% CI 1.08–2.86) (P = 0.055). Twelve months after baseline, upper extremity pain was more often presented in the adverse workstyle compared to the good workstyle group (RR = 3.0, (95% CI 1.76–5.11), P = 0.003). Twelve months after baseline, 100% of the adverse workstyle group and 33% of the good workstyle group reported pain in the upper extremity. Conclusion Workstyle seems to be a mediating factor for upper extremity pain in office workers in a changing work environment. It is recommended to assess workstyle among office workers with upper extremity pain, and to include workstyle behaviour in treatments
A Nonzero Gap Two-Dimensional Carbon Allotrope from Porous Graphene
Graphene is considered one of the most promising materials for future
electronic. However, in its pristine form graphene is a gapless material, which
imposes limitations to its use in some electronic applications. In order to
solve this problem many approaches have been tried, such as, physical and
chemical functionalizations. These processes compromise some of the desirable
graphene properties. In this work, based on ab initio quantum molecular
dynamics, we showed that a two-dimensional carbon allotrope, named biphenylene
carbon (BPC) can be obtained from selective dehydrogenation of porous graphene.
BPC presents a nonzero bandgap and well-delocalized frontier orbitals.
Synthetic routes to BPC are also addressed.Comment: Published on J. Phys. Chem. C, 2012, 116 (23), pp 12810-1281
The Effect of Lattice Vibrations on Substitutional Alloy Thermodynamics
A longstanding limitation of first-principles calculations of substitutional
alloy phase diagrams is the difficulty to account for lattice vibrations. A
survey of the theoretical and experimental literature seeking to quantify the
impact of lattice vibrations on phase stability indicates that this effect can
be substantial. Typical vibrational entropy differences between phases are of
the order of 0.1 to 0.2 k_B/atom, which is comparable to the typical values of
configurational entropy differences in binary alloys (at most 0.693 k_B/atom).
This paper describes the basic formalism underlying ab initio phase diagram
calculations, along with the generalization required to account for lattice
vibrations. We overview the various techniques allowing the theoretical
calculation and the experimental determination of phonon dispersion curves and
related thermodynamic quantities, such as vibrational entropy or free energy. A
clear picture of the origin of vibrational entropy differences between phases
in an alloy system is presented that goes beyond the traditional bond counting
and volume change arguments. Vibrational entropy change can be attributed to
the changes in chemical bond stiffness associated with the changes in bond
length that take place during a phase transformation. This so-called ``bond
stiffness vs. bond length'' interpretation both summarizes the key phenomenon
driving vibrational entropy changes and provides a practical tool to model
them.Comment: Submitted to Reviews of Modern Physics 44 pages, 6 figure
- …