Investigation of Ti-1_x(Zr,Ta,V,W)(x)B-2 and A(l3)Ti(1_x)(Zr,V)(x) grain refiners in additively manufactured Al-2 wt%Cu alloys by a high throughput method

Grain refinement plays a central role in powder bed fusion (PBF) additive manufacturing by preventing hot cracking and thus enabling the development of high-strength alloys. However, the mechanism behind grain refinement is not fully understood for conventional casting, nor for PBF. In this work, a high throughput method have been used to produce Al-2 wt%Cu alloys with additions of Ti1-xM(Zr,Ta,V,W)(x)B-2, Al3Ti1-xM(Zr,V)(x) or AlB2 grain refiners for 0.1 &amp;lt; x &amp;lt; 0.9. It was found that grain size varied with x, M and the sum of Ti + M. Ti1-xMxB2 grain refiners offered no advantage over Al3Ti1-xMx. Overall, Ti and Zr provide the best grain refinement, both as Ti1-xMxB2 and Al3Ti1-xMx. However, Ti1-xZrxB2 had a grain refinement minimum around x = 0.65-0.70. The behavior was similar with Ta, but to a lesser extent. V and W had detrimental effects on grain refinement. Despite the fact that no AlB2 particles were observed, additions of B provided excellent grain refinement and was more efficient than Ti below 0.5at%. Ti1-xMxB2 lattice parameters varied with x and followed Vegards law, however, a clear relationship between grain size and epitaxial strain/lattice match could not be established. Similarly, the growth restricting factor alone was not a predictor of grain size.Funding Agencies|Norsk Hydro ASA; Centre in Nanoscience and Technology at LiTH. Carl Tryggers Foundation for Scientific Research [CTS 14:431]; AMEXCI AB; [CTS 15:219]</p

A novel rapid alloy development method towards powder bed additive manufacturing, demonstrated for binary Al-Ti, -Zr and -Nb alloys

Powder bed fusion (PBF) methods offer the best material properties among metal additive manufacturing (AM) processes. Yet, alloy development for PBF is only at its infancy and has a great untapped potential. This originates from the high solidification rate within the melt pool and to exploit the full potential of materials produced by PBF methods, a diligent work lies ahead. This paper presents a high-throughput method to rapidly screen large compositional alloy intervals experimentally for their PBF feasibility, which can drastically reduce the time needed for alloy development and provide valuable data for modelling. Our method consists of two steps; co-sputtering and electron beam re-melting. First step produces an alloy gradient film on a sheet substrate. The film is then re-molted to produce a PBF mimicked microstructure. The method is successfully demonstrated on binary systems; Al-Ti,-Zr and-Nb and produced gradients in compositional ranges of 3-50 wt%Ti, 1-15 wt%Zr and 2-15 wt%Nb over a length of 200 mm. From the produced materials, the alloying efficiency could be investigated and determined regarding hardness and grain refinement. Zr shows the highest strength contribution per at% and the best grain refinement at low levels. However, at higher levels grain refinement efficiency decreases for Zr. (c) 2021 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY license (http:// creativecommons.org/licenses/by/4.0/).Funding Agencies|Norsk Hydro ASA; Carl Tryggers Foundation for Scientific Research [CTS 15:219, CTS 14:431]</p