5 research outputs found

    Disappearance of stretch-induced wrinkles of thin sheets: a study of orthotropic films

    Get PDF
    A recent paper (Healey et al., J. Nonlin. Sci., 2013, 23:777-805.) predicted the disappearance of the stretch-induced wrinkled pattern of thin, clamped, elastic sheets by numerical simulation of the F\"oppl-von K\'arm\'an equations extended to the finite in-plane strain regime. It has also been revealed that for some aspect ratios of the rectangular domain wrinkles do not occur at all regardless of the applied extension. To verify these predictions we carried out experiments on thin 20 micrometer thick adhesive covered), previously prestressed elastomer sheets with different aspect ratios under displacement controlled pull tests. On one hand the the adjustment of the material properties during prestressing is highly advantageous as in targeted strain regime the film becomes substantially linearly elastic (which is far not the case without prestress). On the other hand a significant, non-ignorable orthotropy develops during this first extension. To enable quantitative comparisons we abandoned the assumption about material isotropy inherent in the original model and derived the governing equations for an orthotropic medium. In this way we found good agreement between numerical simulations and experimental data. Analysis of the negativity of the second Piola-Kirchhoff stress tensor revealed that the critical stretch for a bifurcation point at which the wrinkles disappear must be finite for any aspect ratio. On the contrary there is no such a bound for the aspect ratio as a bifurcation parameter. Physically this manifests as complicated wrinkled patterns with more than one highly wrinkled zones on the surface in case of elongated rectangles. These arrangements have been found both numerically and experimentally. These findings also support the new, finite strain model, since the F\"oppl-von K\'arm\'an equations based on infinitesimal strains do not exhibit such a behavior.Comment: 16 pages, 5 figure

    The Mullins effect in the wrinkling behavior of highly stretched thin films

    Get PDF
    Recent work demonstrates that finite-deformation nonlinear elasticity is essential in the accurate modeling of wrinkling in highly stretched thin films. Geometrically exact models predict an isola-center bifurcation, indicating that for a bounded interval of aspect ratios only, stable wrinkles appear and then disappear as the macroscopic strain is increased. This phenomenon has been verified in experiments. In addition, recent experiments revealed the following striking phenomenon: For certain aspect ratios for which no wrinkling occurred upon the first loading, wrinkles appeared during the first unloading and again during all subsequent cyclic loading. Our goal here is to present a simple pseudo-elastic model, capturing the stress softening and residual strain observed in the experiments, that accurately predicts wrinkling behavior on the first loading that differs from that under subsequent cyclic loading. In particular for specific aspect ratios, the model correctly predicts the scenario of no wrinkling during first loading with wrinkling occurring during unloading and for all subsequent cyclic loading.Comment: 15 pages, 9 figure

    Cracking Patterns of Brittle Hemispherical Domes: an Experimental Study

    Get PDF
    Crack formation in hemispherical domes is a distinguished problem in structural mechanics. The safety of cracked domes has a long track record; the evolution of the cracking pattern received less attention. Here, we report displacement-controlled loading tests of brittle hemispherical dome specimens, including the evolution of the meridional cracking pattern. The 27 investigated specimens, 20 cm in diameter, were prepared in 3D printed molds, and their material is one of the three mixtures of gypsum and cement. We find that neither the (limited) tensile strength nor the exact value of the thickness significantly affects the statistical description of the cracking pattern, i.e., the cracking phenomenon is robust. The maximal number of the meridional cracks never exceeds seven before the fragments’ disintegration (collapse). We find that the size distribution of the fragments exhibits a lognormal distribution. The evolution is reflected in the load-displacement diagrams recorded in the test, too, as significant drops in the force are accompanied by an emergence of one or more new cracks, reflecting the brittle nature of the phenomenon. A simple, stochastic fragmentation model, in which a segment is fragmented at either in the middle or at the fourth point, fairly recovers the observed size distribution

    Electronics and optoelectronics of two-dimensional transition metal dichalcogenides

    No full text
    corecore